We will be exhibiting at the International Powder Technology Exhibition Tokyo 2018 (Powtex 2018) this year as well!

Just set up the commercially available stainless steel container! It enables soft mixing and three-dimensional mixing and stirring.

The pot blender (swing type) is a small-scale mixing machine that uses commercially available stainless steel tanks. It is ideal for mixing tasks that require frequent product changes, as the containers are easy to remove and replace. Cleaning is straightforward, and since it uses standard stainless steel containers, there is no need to transfer the mixture after blending. The entire container rotates slowly, allowing for gentle mixing. The mixing time can be easily set, enabling mixing tailored to the raw materials. 【Features】 - Addresses safety concerns and physical strain associated with manual labor - Mixing parts use commercially available stainless steel containers - Easy to set up for mixing tasks as it can be used as is - Simple container removal - Gentle mixing allows for soft materials to be blended - Simple structure makes maintenance easy *For more details, please refer to the catalog.

• Other powder equipment

A unique classifier that carries powder particles on an air flow and passes them through a screen.

To classify powder particles into the required sizes (a process called classification), there are two common methods: using a screen (sieve) and using air flow to classify based on differences in specific gravity (air classification machine). It is not feasible to achieve 100% or a mixing ratio of 0% with an air classification machine, and a vibrating sieve cannot handle large volumes due to issues like clogging. The "Micro Shifter" is a unique classification machine that allows powder particles to pass through a screen while being carried by an air flow. The newly developed fan-less type (NF type) incorporates a specific gravity sorting mechanism, achieving higher precision classification. The "Air Jet Sieve Particle Size Analyzer" uses dedicated JIS standard sieves and can measure down to a minimum of 20μ. 【Features】 ■ High precision classification and sorting ■ Can handle easily agglomerated fine powders ■ Can process adhesive powders ■ High reliability due to screen type ■ Screen replacement is easy with a one-touch mechanism ■ Easy internal cleaning ■ Minimal vibration ■ Can be used for removing foreign materials such as hair and debris from powders, as well as removing powder from particles ● For more details, please contact us or download the catalog.

• Other powder equipment

Prevents damage to raw materials and streamer formation in pellets. It also leaves no residue due to its self-cleaning action.

"Pellbow" is an elbow pipe that reduces friction of bulk materials during air transport due to its unique structure. The materials accumulated in the pocket-like "impact zone" cover the collision area, preventing damage to the transported raw materials and the generation of streamers during resin pellet transport, thereby suppressing the occurrence of fine powders and damage to the piping. Its compact design minimizes piping space, making it more space-efficient than standard elbow pipes, and it can be customized flexibly. 【Features】 ■ Self-cleaning action leaves no residue ■ Compatible with various standard flanges and pipes ■ Contributes to low noise levels ■ Low pressure loss *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other processing machines
• Other process controls

Crushing resin-based pellets such as plastics at room temperature! Sharp blades that can cut films as thin as 0.005mm.

The "SRC Series" is a grinding machine that can finely pulverize plastic pellets at room temperature. It is equipped with numerous sharp blades that can cut ultra-thin films of 0.005mm, allowing for repeated cutting until the desired fineness is achieved. A dust collector at the top collects only the fine powder, enabling the production of plastic powder with the desired particle size. Unlike traditional cryogenic grinding, it does not require large-scale equipment and is very cost-effective. Additionally, since it does not use screens for particle size control, there is no concern about product defects caused by clogging or tearing. 【Features】 ■ Capable of fine pulverization of plastic pellets ■ Can also finely grind paper, fabric, rubber, etc. ■ Grinding and classification can be performed simultaneously ■ Particle size can be changed by adjusting the airflow ■ Energy-efficient operation with only rotating and fixed blades *For more details, please contact us or download the catalog.

• Crusher

This is the comprehensive catalog for the plastic pellet foreign matter separation and removal machine, Pelatron Diduster.

We have followed the flow of nature. The pursuit of high-purity raw materials has led to the development of separation and classification technologies. Air cleaning of grains, corn, rice, and other foods has been practiced for thousands of years. Over the centuries, the need for efficiency in cleaning and separation/classification has led to the development of new technologies. The air cleaning, separation, and classification technologies in our latest machines are based on the same concept. For more details, please contact us or download the catalog.

• Food Conveyor Equipment
• Other process controls

Cleaning technology suitable for all pellets before product shipment, after transportation, and before manufacturing.

"Pelletron Didasters" is a super high-precision separation and removal device that efficiently separates and removes dust such as cutting chips, fines, powdery fluff, and strip fluff (which may mix in during processes like air transport) from pellets.

• Resin processing machine

Compact and lightweight design! It is effective for the separation and removal of foreign substances in pellets and feed!

The foreign matter separation and removal device "Diduster RC Series" is a compact type equipped with all the necessary functions, offering low price and low running costs. It is completely different from large separation devices that require conventional air transport systems, dust collectors, and other equipment. Inside the "Petron Diduster," products move primarily by gravity, resulting in excellent energy efficiency, and with fewer drive components, practical maintenance is unnecessary. 【Features】 ○ Excellent dust removal effect ○ New design with lightweight construction ○ Outstanding processing capacity (5kg/h to approximately 250kg/h) ○ Enables equipment at a low price! ○ Even more compact than conventional models For more details, please contact us or download the catalog.

• Hazardous material processing

Crush powerfully with a small motor! Ideal for coarse crushing in a wide range of applications from ores to food and chemicals.

The "Hammer Crusher" is a coarse crusher that powerfully crushes large raw materials. The hammer pins attached to the rotor stand upright due to the centrifugal force of high-speed rotation, and the tips of the hammers deliver a significant impact force at maximum peripheral speed, crushing lump, sheet, and granular raw materials to about a few millimeters. When the hammer strikes hard or difficult-to-crack materials, it swings and repeatedly delivers impacts, allowing for a large crushing capacity with a small motor compared to crushing all at once with fixed hammers. The product particle size is determined by the rotation speed of the hammers and the hole diameter of the attached screen.

• Other processing machines
• Crusher
• Crusher

Low wear and high durability crusher. Multi-purpose, high performance, and low price with over 10,000 units sold.

The "Makino Type Crusher DD Series" features a directly connected rotating plate that reduces transmission loss, while also achieving cost reduction through simplified structure. The attached blades on the rotating plate are hardened, making them resistant to wear and providing excellent durability. Additionally, the shape of the blades has been modified from previous models to achieve further fine grinding. It is compatible with various raw materials such as ores, resins, gypsum, glass, and grains. 【Features】*For details, please refer to the catalog. ■ Achieved approximately 30% cost reduction (compared to our company) through structural simplification ■ No maintenance required for belt adjustments due to direct motor connection ■ Special cast steel used for blades extends the lifespan of consumables ■ Capacity increase is possible with only motor replacement ■ Consideration of blade arrangement reduces noise and airflow generation ■ Changing the rotation speed is easy with an inverter ◎ For more information, please refer to the PDF materials or feel free to contact us.

• Crusher

Fully cleanable mixing machine, ribbon mixer, sanitary specifications.

A mixing machine with a body casing that has a fully welded structure and can be completely cleaned. ■Features■ ■ The case is designed with a fully welded structure and a clever connection of the shaft to achieve complete cleaning. ■ The ribbon part is also designed with cleaning in mind. ■ The seals in the bearing section are made of a two-part resin for easy removal. ■ Volume: 50 to 1,500 liters (actual capacity). ■ Discharge methods: slide gate, swing gate, choke valve. ■ Materials: contact parts made of SUS304/316/316L; seal resin made of nylon and others. ■ For other functions and details, please download the catalog or contact us.

• Mixer/agitator

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

HP Inc. will hold the "HP Future of Work AI Conference 2025" at Tokyo International Forum, Hall B. At this event, under the message "Freedom to be particular about how we work," we will introduce the possibilities of on-device AI and its practical applications, along with case studies and technological trends. Whether you are considering implementing AI or have already started using it, you are sure to find hints for your next steps. We sincerely look forward to your attendance.

Our company will be exhibiting at the "15th Agriculture WEEK (J-AGRI Tokyo)" held at Makuhari Messe from October 1 (Wednesday) to October 3 (Friday). In the Livestock Materials EXPO zone, we will be showcasing our popular products for livestock and facility horticulture, including the "retrofit mist system for existing fans in barns/greenhouses, easy-to-install integrated mist system TM" and the "new product, large cylindrical mist system TM," along with related products. We sincerely look forward to your visit. Our booth number is 36-34 in Hall 9 of Makuhari Messe.

Yakeshi Electric will exhibit at the Space Science and Technology Union Conference to be held in November 2025. ■69th Space Science and Technology Union Conference https://smartconf.jp/content/sstc69/ Dates: November 25 (Tuesday) - November 28 (Friday), 2025 (4 days) The Space Science and Technology Union Conference is a large-scale event where people involved in space, including JAXA, various research institutions, universities, and private companies, gather together. Our company develops electronic sources for small satellites (including impregnated cathodes and LaB6) and manufactures peripheral components such as sensors and power supply units. This time, we plan to expand our display of electronic sources and include additional components such as tantalum and Inconel! In particular, electronic sources like impregnated cathodes are often purchased from overseas due to the limited number of domestic manufacturers, which can lead to difficulties in fine adjustments and flexibility. However, our company offers: ● Control of porosity and selection of emitters ● Manufacturing according to desired sizes and shapes ● Production starting from one unit ● Stable domestic procurement We can provide solutions tailored to your research and development needs! Please feel free to consult with us.

We will introduce an overview of "IATF16949:2016," which is an essential requirement for entering the automotive industry, along with key points considering the current situation of industry trends. In planning for certification of sector standards, we have structured the training content for companies that are gathering information on what to do first and planning to obtain certification. * We have received inquiries from business partners and are struggling to respond. * We are planning to obtain certification but do not fully understand the specific preparations and initiatives required. This seminar is recommended for companies seeking to acquire knowledge and gather information about sector standards.