★★Update★★ Kuratech, customer feedback has been posted.★★★

Project duration and cost reduction possible! This is a lightweight mortar reinforcement fiber that is easy to transport and add compared to steel fibers.

Keif handles products such as polypropylene fibers and vinylon fibers, which are compatible with concrete. "Mortar reinforcement fibers" have good adhesion to cement, making it difficult for cracks to form, and if cracks do occur, they help suppress their growth. The binding force of the mortar reinforcement fibers reduces the weakening of the structure during freezing, improves freeze-thaw resistance, and enhances long-term durability. 【Advantages of Reinforcement Fibers】 ■ In surface work, the lath application can be omitted, reducing construction time and costs. ■ Compared to steel fibers, they are lightweight, making transportation and addition easier. ■ Being organic fibers, they do not rust and maintain aesthetic appeal. 【Expected Application Scenarios】 ■ Sprayed concrete (surface work, tunnels) ■ Secondary lining ■ Painting work, etc. 【Products Handled】 ■ Kratec ■ Valtip MK, etc. *For more details, please refer to the PDF titled "A Must-See for Surface Work Contractors! Comparison Table of Mortar Reinforcement Fiber Method and Conventional Methods."

• fiber
• others

Prevent cracks in slope construction! Safe! Easy! Shortened construction period!

NETIS Registration Number: CG-070010-A "Kuratec" is a vinyl fiber for reinforcing mortar on slopes. By adding "Kuratec," it is possible to shorten the construction period by cutting out the lathing process depending on the site conditions, which in turn achieves cost reduction. Additionally, it has good adhesion to cement, making it less prone to cracking, and if cracks do occur, it suppresses their growth. Furthermore, since the quality of the mortar improves, it is also possible to reduce the thickness of the spray application. For more details, please contact us or download the catalog to view.

• fiber
• Other polymer materials
• others

It is a polypropylene fiber for mortar reinforcement that excels in workability and chemical resistance.

For crack suppression in slope construction! NETIS registration number: KT-100021-VE. ■ Lightweight and excellent workability. With a density of 0.91g/cm3, it is light and easy to transport and mix. ■ Excellent chemical resistance and rust-free. It has superior alkali resistance and durability. ■ Adhesion to concrete. Embossed processing and hydrophilic treatment improve adhesion and enhance bending toughness. ■ Environmentally friendly. It does not produce dioxins (chlorine gas) when burned. 【Proposal: Weed prevention using reinforced fiber mixed spraying】 At K-F, we propose "weed prevention work using mortar reinforced fiber mixed spraying." Mortar reinforced fiber mixed spraying involves mixing polypropylene fibers for mortar reinforcement, "Balchip MK," with crack suppression polypropylene short fibers, Toughlight RG, and spraying them to further reduce the crack occurrence rate in mortar structures, thereby enhancing durability and reducing lifecycle costs. By performing reinforced fiber mixed spraying on slopes, such as at the base of the slope, more lasting weed prevention effects can be expected.

• others

For suppressing shrinkage cracks in sprayed mortar! Safe material made of polypropylene! Crack-suppressing short fibers that can be mixed with a mixer.

Crack-inhibiting polypropylene short fibers, Toughlight, are processed into bundles, making them less likely to scatter and less likely to pierce the skin. Furthermore, since polypropylene is the material used, no toxic gases are generated during combustion, making it a highly safe crack-inhibiting short fiber. 【Incorporation Effects】 ● Reduces scattering and collapse during spraying ● Reduces shrinkage cracks caused by temperature changes and drying during the curing period 【Excellent Workability】 ● Easily mixed with a conventional mixer ● Generates few fiber balls and has high degradability ● The flow value remains unchanged with the incorporation of Toughlight, maintaining fluidity ● During spraying operations, fibers do not pierce like needles due to rebound There are many other features as well! For more details, please contact us or download the catalog to view. 【Proposal: Weed Control through Reinforced Fiber Mixed Spraying】 At K.F., we propose "Weed Control Work through Mortar Reinforced Fiber Mixed Spraying." Please check the basic information section below for details.

• Other polymer materials
• others

Easy and low-cost crack prevention. It effectively suppresses breathing and demonstrates excellent results.

For the suppression of concrete cracking, please use Toughlight CP, a polypropylene fiber for concrete crack suppression. Features: 1. Easy mixing. Just add it directly from the bag and spin for three minutes at high speed. 2. Low cost. Can be installed for about 80 to 160 yen per square meter! *This is for a concrete thickness of 10 cm. 3. A reliable NETIS registered product. For more details, please contact us or download the catalog to view.

• fiber
• others

Less likely to clump! Short fibers for mortar spraying!

Easy Fiber for crack suppression reinforcement is a short fiber used for crack suppression and reinforcement in sprayed mortar. Its framework offers flexibility and workability, allowing for the preservation or restoration of green spaces through methods such as reinforced soil construction. For details on effectiveness and safety concerns, please contact us or download the catalog for more information.

• fiber
• others

The catalog subsidy is a grant system aimed at improving productivity and added value for small and medium-sized enterprises by selecting and implementing general-purpose labor-saving products such as IoT and robots from a pre-registered "product catalog." This initiative also aims to lead to wage increases. Features of the catalog subsidy: - Ability to choose general-purpose products from the catalog - Subsidy of up to 15 million yen - Support for applications from sales businesses - Ongoing public recruitment [Search for products that can be introduced with the catalog subsidy now] https://amada.shoryokuka-catalog.zeroplus-consul.co.jp/ *For more details, please refer to the related links or feel free to contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Spline Network Co., Ltd. (Headquarters: Shibuya, Tokyo; President: Yoichi Yukino) will hold a free campaign for its WiSAS environmental scan service, one of its vulnerability assessment services, to commemorate the 6th anniversary of the release of the Wi-Fi Security Assurance Series (hereinafter referred to as WiSAS).

The end of the year and the beginning of the new year is an excellent time to reflect on the past year and plan for the next. How did your company approach DX in 2025? Did you consider implementing a production management system? Did you take a step forward in utilizing AI? This article provides a practical guide to objectively evaluate your DX efforts in 2025 and to formulate specific strategies for 2026. Why not take the time during the year-end and New Year to carefully review your company's DX strategy? For more details, please see the related links.

Microsoft has announced that it will end support for Basic Authentication in Client Submission (SMTP Authentication) for Exchange Online between March and April 2026. Once this support is discontinued, sending emails using Basic Authentication (SMTP AUTH) will no longer be possible. Therefore, we would like to provide information regarding the affected features and planned responses in the TECHS series as follows. Reference: Microsoft Information Exchange Online to retire Basic auth for Client Submission (SMTP AUTH) Retirement of Basic Authentication for Exchange Online Please see the related links for more information.