Thank you for visiting the International Powder Technology Exhibition Tokyo 2018.

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

【Features】 - This is a hopper designed for material feeding. - The hopper has a sharp angle of 60 degrees, allowing for smooth feeding. - It can be easily installed if your current equipment or tank lid has a helix pipe. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the helix at the discharge outlet can be changed. - The type of discharge outlet can also be modified; it can be changed to a flange or nipple. Please consult us.

• Food Processing Equipment

No accumulation of contents, dirt, or cleaning solution! A discharge chute that works great when using the inverted lifter! Custom-made to suit your needs!

By setting it in our stainless steel tank (ST/CTL) and inverting the container, the contents of the powder can be discharged (or input) into equipment such as grinders. The connection parts are flat to prevent powder accumulation, ensuring that even expensive powders are not wasted. Additionally, the included PTFE gasket does not tear, preventing contamination of the contents. The chute is made of stainless steel, making it resistant to rust, and the gaps in the rolled edge are welded all around to prevent dirt and cleaning liquids from accumulating, making it very hygienic. It can also be used as a discharge chute when using an inversion lifter. Its thin and lightweight design makes it easy to handle. Specifications can be changed according to the application.

• Stainless steel container

Reversible lifter compatible! Ribbed stainless steel airtight container.

The body of the lever band type stainless steel airtight container [CTL] has been ribbed. It can be sealed with a single touch using the included lever band, preventing spillage of contents and contamination from dust and other foreign substances. Made of stainless steel, it is resistant to rust and can be reused repeatedly, and the ribbing provides greater strength compared to standard products. The width and position of the ribs can be determined as desired. When installing the inverted lifter, the ribs act as a non-slip feature, making it an inverted discharge container when used in conjunction with the discharge chute [HTL].

• Stainless steel container

Control valve for powder and granular materials! There are no sliding parts or obstacles on the passage surface, so it does not damage the contents.

This is a control valve for bulk materials, also known as an iris valve. It is used as a valve for discharging and feeding bulk materials. - The choke rope on the outside allows the sleeve (valve) to open and close smoothly like a lens shutter. - The powder contact area is covered with fabric, leaving no gaps for powder to enter. - There are no sliding parts or obstacles on the passage surface, so it does not damage the contents. - It has a hygienic connection type, making it easy to connect and disconnect. - The sleeve can be easily attached and detached with one touch, allowing for simple replacement and cleaning. - Flow rate adjustment can be done freely with a handle. - The material of the sleeve can be changed according to the contents.

• valve

For powder recovery in various devices such as crushers, sieves, cyclones, and dust collectors!

【For powder (granular material) collection and receiving containers in various devices such as crushers, sieves, cyclones, and dust collectors!】 The collection container uses a one-touch clip CTH container. You can choose the connection type according to the machinery or device. We also design and manufacture to match your existing equipment. 【Here are some situations where powder collection containers are active!】 ● As a collection bucket for cyclones ● As a receiving container for tablets in tablet press machines ● As a receiving container for powder in sieves ● As a dust collection tank for dust collectors 【Not just for powders!】 In addition to powder collection, it is also effective for liquid collection and tablet collection, and can be used in various situations!

• Mixer/agitator

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Hotron's "HA Series" is a high-function doorway monitoring sensor. Even with high doors of 4.0m, it ensures safety while proposing an open and inviting entrance through its doorway monitoring feature. 【Surface Mount Type HA-400】 ○ Safe and comfortable passage can be achieved even with high doors, from lightweight doors to large commercial facilities and office buildings. ○ Maximum installation height of 4.0m! It features a high-density area function with 60 detection spots. 【Recessed Type HA-520】 ○ With a flat finish that does not compromise the aesthetics of the building, it ensures a wide area for safe and comfortable passage. ○ Easy replacement from older models of our own, with improved sensor performance! 【Lower Surface Mount Type HA-430】 ○ With a design that minimizes protrusion and blends in, it allows for safe and comfortable passage even with high doors. ○ Detailed detection areas can be set while maintaining high density according to the site conditions. 【Ceiling Mount Type HA-260】 ○ An industry-first ceiling-mounted sensor with a flat finish using a pull-down method that does not compromise the aesthetics of the building. ○ The detection area achieves a wide coverage with high density of 72 detection spots! ◎ For more details, please contact us or download the catalog.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● What is a flow meter? Flow meters measure flow rates using mass flow meters or laminar flow meters and perform pass/fail judgments based on flow rate criteria. They are ideal for measuring airflow and conducting performance tests. "FMZ-1063 series" This is a flow tester equipped with a mass flow meter. It offers high precision of ± 3.5 % of R.D. ± 1 digit (in the normal flow range). It features a time-saving function (scan measurement). The FMZ-1063 is a compact, all-in-one flow tester with various functions. "FU series" This is a flow measurement unit that integrates laminar and differential pressure sensors, making it smaller and lighter. When connected to a display indicator (model: MI-170), it can provide direct flow readings as well as pressure and flow judgments. "FLF-110 series" This is a laminar flow meter capable of measuring a wide range of flow rates from 2 NmL/min to 500 NL/min.

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.