[Explanatory Material] Registered the powder mixer essential for food and pharmaceuticals!

I have summarized the powder mixing machines necessary for mixing powders evenly.

Powder mixing machines are essential in the production processes of food and pharmaceuticals. Our stainless steel containers also play a role as part of equipment such as receiving containers. Mixing powders is not as simple as just preparing a stirrer like you would for liquids. Since powders do not move fluidly, specialized machines are necessary to achieve uniform mixing. Here, we will introduce a few common types of powder mixing machines from the many available.

• Stainless steel container

Why does powder get clogged? An explanation of basic terms related to powder and methods to resolve powder clogs from the perspective of the container used for the powder!

What are the ways to resolve "powder clogging"? "Powder clogging" is a common issue when discharging powder from a container. It can lead to delays in discharge or even a complete stop, which may result in inconsistencies in product quality. But why does the powder discharge poorly (get clogged) in the first place? Here, we summarize the causes of powder clogging and the specifications of containers and peripheral equipment to resolve it.

• Stainless steel container

We have compiled stainless steel containers that are easy to clean and help prevent foreign matter contamination.

Have you ever experienced the following issues while using stainless steel containers? - Contents or dirt getting trapped in the rim of the container, making it impossible to remove. - Dirt accumulating on the handle, causing inconvenience. - Taking a long time to remove dirt or cleaning solution that has entered the gaps of the container during the cleaning process. When dirt or foreign substances get into the gaps of the container, they are difficult to remove. This not only prolongs the cleaning process but also the residual dirt or cleaning solution can lead to foreign matter contamination or cross-contamination. So, what kind of stainless steel containers can help reduce cleaning time?

• Stainless steel container

I have summarized the important cleaning methods to make stainless steel containers last longer.

After using a stainless steel container, it is essential to clean the container. However, incorrect cleaning methods can cause scratches or lead to rust. Here, we will introduce important cleaning methods to help prolong the life of stainless steel containers.

• Stainless steel container

BA material, 2B material, buff polishing, electrolytic polishing... A grand reveal of stainless steel surfaces that cannot be discerned by the naked eye!

Smooth, rough, silky... Depending on the material and surface finish, stainless steel shows various appearances. However, it is not possible to see what the actual surface looks like just by visual inspection. Therefore, this time, we will introduce photographs of stainless steel surfaces taken using a scanning electron microscope (SEM). *What is a scanning electron microscope (SEM)?* Unlike optical microscopes (such as magnifying glasses and general microscopes) that use light, a scanning electron microscope uses electron beams. It allows us to clearly see fine surface structures that cannot be observed with optical microscopes.

• Stainless steel container

Stainless steel is a metal that is "difficult" to rust!

We sometimes receive inquiries from customers saying, "Even though it's made of stainless steel, it rusted quickly." Stainless steel, as the English words "Stain (rust, corrosion) + less (less) + steel (steel)" suggest, is an alloy of iron that is highly resistant to rust. While it is much less prone to rust compared to regular iron, it is not completely rust-proof. This PDF document summarizes "Why is stainless steel resistant to rust?", "What causes rust on rust-resistant stainless steel?", and "What are the rust prevention measures for stainless steel containers?" You can view it immediately by downloading the PDF.

• Stainless steel container

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.