Near Infrared Dryer Promo Series

A paint drying machine that finishes without unevenness, uniformly, and beautifully. It has a quick startup, achieving 100% heating immediately after switching on! *Widely adopted in the automotive industry.

The "Promo Series" is an infrared paint drying machine that uses halogen lamps. Compared to the mainstream "far infrared drying machines" used for automotive paint drying, it has a faster temperature rise, improving drying time and power consumption! Additionally, it has excellent compatibility with high-quality coatings such as urethane resin paints. Since the irradiation section can be heated immediately, it can replace conventional drying ovens, improving costs and space. <Lineup> ● SIR-F50: The high-end model SIR-9810W has evolved! It can easily dry the roof of a Hiace! ● SIR-6624: A 6-lamp model with a standard temperature sensor; this is the one to choose if you're unsure! ● SIR-3458S: Comes standard with a temperature sensor to avoid troubles through temperature management. ● SIR-2220D: Lightweight and easy to move. Can be changed from 2 lamps to 3 lamps with optional equipment. ● SIR-813D: A compact model that can be used handheld or mounted on a stand. ● SIR-1712D: More compact, suitable for light repairs. <Features> ● Capable of drying paint in 15 minutes. ● Quick irradiation immediately after painting allows for complete drying. ● Suitable for drying two-component urethane paints. ● Can achieve 100% heat generation immediately after turning on the power switch.

• Painting Machine

Efficient use of painting equipment: Rail system for suspended heaters. Proposal for ceiling-mounted heaters to optimize factory space and improve work efficiency.

The world's first promotional rail hang system features the Promo2 irradiation panel in a ceiling-mounted configuration. By installing a custom aluminum rail on the ceilings of factories and sanding spaces, this system allows for the drying of painted roofs, side panels, bonnets, and more, effectively utilizing factory space. - "Good workability in a cordless environment" - "Reduction in painting drying time" - "Lower running costs" - "Shortened work time" We propose a ceiling-mounted environment tailored to the layout and requirements of your factory.

• Other painting machines

Using halogen lamps, achieve shorter delivery times, increased efficiency, and improved quality with high-speed drying of printed materials! It is also ideal for drying non-PVC films.

The "PD PROMO PD-5102 (2-lamp type)" is an inkjet printing dryer that quickly dries using the power of near-infrared light. With the near-infrared ink dryer "PD PROMO," you can achieve shorter delivery times, maintain quality, and improve work efficiency! It uses long-life near-infrared halogen lamps that heat up instantly without the need for preheating, preventing drying failures. <Features> ● Achieves quick drying. When the power switch is turned on, it can immediately generate 100% heat, allowing for irradiation right after printing. ● Adjustable irradiation time with a timer. This reduces the hassle during drying. The height and angle of the heater can be adjusted, allowing for irradiation tailored to the printed materials. ● Irradiation output can be adjusted according to the media being dried. You can choose from three levels: 70% output, 85% output, and 100% output. ● Domestic product with quick maintenance response. ● Adopts a special reflector shape that maximizes irradiation efficiency, drying the media evenly without unevenness. ● Automatically stops due to tilting or vibration of the heater body.

• Drying Equipment

Designed a high-efficiency dryer using near-infrared halogen lamps! By promoting drying and effects from the inside, it reduces un-dried and un-cured areas! Energy-saving and long-lasting!

Near-infrared halogen lamps promote drying and curing from the inside of the target object, thereby reducing the occurrence of defects such as insufficient drying or curing. Additionally, they reach the required temperature instantly when powered on, allowing for efficient processing in a short time. This contributes to cost reduction through energy savings and is also environmentally friendly. We provide drying and heating performance tailored to the purpose, application, and materials being dried, and we design according to various materials and objectives. ■ Features - Fast response - High-quality infrared radiation unaffected by ambient temperature due to lamp-type radiant heating - Uniform irradiation reduces uneven baking and drying - Contamination-free clean heating, regardless of heating atmosphere such as in air or vacuum - Long lifespan design of approximately 3,000 to 5,000 hours (varies depending on usage environment and output) * For details, please download the PDF or contact us.

• Other semiconductor manufacturing equipment

For high-speed drying of printed materials! Near-infrared dryer with settings adjustable to printing and transport speeds.

The "PD PROMO PD-KD Series" is a high-speed printing compatible dryer that quickly dries using the power of near-infrared light. It allows for output settings tailored to printing and transport speeds, and can be installed according to the transport mechanism. It supports high-speed printing of over 150m/min, contributing to improved production efficiency. It uses long-life near-infrared halogen lamps, which heat up immediately without the need for preheating, preventing drying failures. The cooling time is also minimal. <Features> ● Compatible with various works and inks ● Can be set to a compact length of approximately 1 meter ● Adjustable distance from the work for reliable and clean drying ● Domestic product with quick maintenance response

• Drying Equipment

Paint drying heater using near-infrared halogen lamp, equipped with a standard radiation temperature sensor. Features putty drying mode.

Compact type that does not require a designated storage location. Despite its compact size, it has a wide irradiation range (W:900・H750), allowing for drying of items the size of a light vehicle door in one go. It is low-priced yet comes standard with a temperature sensor, offering usability that is unmatched. <Features and Benefits> ● Equipped with a radiation temperature sensor for temperature management during drying ● Temperature management function of the radiation temperature sensor prevents issues caused by overheating ● Near-infrared dryer using halogen lamps ● Newly designed controller with LCD display ● Upper and lower halogen lamps can be turned on and off individually ● Supports non-styrene putty that requires temperature management with putty drying mode ● Three drying modes (silver painting, other painting, putty drying) included ● Improved operability with LCD screen display

• Painting Machine

<Title> Development of Gene Expression Control Technology through RNA Hacking In the latest presentation paper, we have utilized Abby. Associate Professor Yosuke Katsuta from Kumamoto University Graduate School of Advanced Science and Technology, Analytical Chemistry Laboratory (also co-founder of StapleBio), will be giving a presentation in an online seminar. He is working on the development of RNA hacking technology aimed at controlling gene expression by utilizing short nucleic acids named Staple to change the higher-order structure of target mRNA. He will present the latest data focusing on the results of cell experiments and animal experiments in the development of this technology. Related paper on the presentation content: Staple oligomers induce a stable RNA G-quadruplex structure for protein translation inhibition in therapeutics | Nature Biomedical Engineering

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.