Let's work more comfortably! "Work Style Reform" with a height-adjustable device.

With a load of 5 tons, it can operate continuously for 72 hours without bursting! High-durability urethane roller and urethane bearing Powermax.

● This is a urethane roller and urethane bearing made from a material that excels in rebound elasticity compared to conventional urethane rubber and is resistant to bursting. ● It is a high-durability specification that did not experience deformation or bursting issues even when subjected to a load of 5,000 kg and operated continuously for 72 hours at 12 km/h. (φ500, urethane roller) ● When conducting the following running tests on the urethane bearing, it showed significantly less wear compared to general-purpose urethane, with almost no changes observed. (See image) Test conditions: Size: Ø58×20 Hardness: 95A Load: 60 kgf Speed: 6 km/h (100 m/min) Running distance: 250 km ● Due to its excellent rebound elasticity, it has a small deformation range and suppresses heat generation. ● It has excellent wear resistance and is recommended for clean rooms.

• caster

Electric Lifting Device Multi Lift ML-2-CL Type Clean Room Type

●It has a low dust emission equivalent to ISO14644-1 cleanliness class 4. ●It has a thrust of 3000N. ●You can register the height at two locations for each of the three user codes. ●When you remove the black resin cover on the side, there are grooves where you can attach parts like reinforcement bars. ●It has a safety design where the limit switch operates at the final position of extension, cutting off the power.

• Solenoid Actuators
• Actuator
• lift

Electric lifting device Multi Lift ML-2-ESD type Electrostatic Discharge (ESD) type

● It can discharge static electricity to the ground (maximum resistance 100Ω). ● You can register up to two heights for each of the three user codes. ● There is a groove when you remove the black resin cover on the side, allowing for the attachment of reinforcement bars and other components. ● A limit switch operates at the final position of extension, ensuring a safe design that cuts off the power.

• Solenoid Actuators
• Actuator
• lift

Electric lifting device Multi Lift ML-2-IM type Impact-resistant type

● The built-in damper absorbs shocks, preventing damage to internal parts even under strong impacts. ● The thrust is 3000N. ● You can register up to two height settings for each of the three user codes. ● Removing the black plastic cover on the side reveals grooves where reinforcement bars and other components can be attached. ● The limit switch operates at the final position of extension and is designed for safety by cutting off the power.

• Solenoid Actuators
• Actuator
• lift

Table-specific electric lift device model LFT-2E-600

●Ideal for workbenches and office desks. ●Easy to assemble! The wiring for the handset and control unit comes pre-connected, so no complicated wiring work is required. ●The load capacity is approximately 100kgf (1000N). ●It has a memory function that can store the height of the tabletop at four different positions.

• Other process controls

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.