Demonstrating capabilities in fields such as lead frames with fine processing using φ0.03 wire! Oil-type ultra-precision wire electrical discharge machining machine 'MEX15'.

It demonstrates its capabilities in fields such as lead frames through fine processing with φ0.03 wire.

The "MEX15" is an oil-type ultra-precision wire electrical discharge machine that achieves a contour shape accuracy of ±0.5μm in lead frame processing. Furthermore, it adopts a high-rigidity gantry structure with minimized thermal displacement and a seal-less "virtual cross table," achieving straightness of less than 0.1μm on both the X and Y axes. It provides a high probability supply with a cycle time of under 3 minutes for a wire diameter electrode of φ0.03, and it is also capable of supplying at break points. 【Features】 ■ Achieves straightness of less than 0.1μm over the full stroke ■ Achieves contour shape accuracy of ±0.5μm ■ Achieves pitch processing accuracy of ±0.5μm ■ Achieves roundness of 0.4μm ■ Achieves high probability connection with φ0.03 wire *For more details, please refer to the external link or feel free to contact us.

• Electric discharge machine

Features: ● Equipped with NVIDIA Jetson Orin NX ● Supports JetPack 6.2 Super mode ● 8GB/16GB LPDDR5 onboard memory ● USB 3.2 Gen 2 x 4 ● RS232 x 1 ● 10-pin header DIO ● Expansion: M.2 2230 E-Key x 1, M.2 3052 B-Key x 1

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Pre-installed with Jetpack 6.0.0

Features: ● NVIDIA Jetson Orin NX 8GB/16GB ● Fanless design ● 8GB/16GB onboard memory ● PoE/PSE GbE LAN x 8 * 4 ports of PoE share one MAC address and Giga bandwidth * Supports a total of 120W PoE with input of 24V or higher, 80W PoE with input of 12-24V, and 80W PoE with input of 12V or lower. ● Giga LAN x 2 ● Supports 9V-36V DC input and can also accommodate ACC ignition delay On/Off ● Jetpack 6.0.0 pre-installed

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.