Spectrum Instrumentation GmbH has released the next-generation 16-bit mid-range AWG (Arbitrary Waveform Generator) NET Box "DN2.65x" series.

AWG network box that can be easily connected to desktops and laptops via Ethernet and can be easily used from the included GUI.

Spectrum DN2.65x - 16 channel, 16 bit AWG (Arbitrary Waveform Generator) NETBOX up to 125 MS/s series Ethernet Remote Arbitrary Waveform Generator LXI Core 2011 compliant Gigabit Ethernet interface Maximum continuous data transfer rate: 100MB/s (depends on your network environment) Optionally, a Linux controller can be integrated Sample rate: up to 125MS/s Resolution: 16 bit Maximum bandwidth: 60MHz Maximum 2 x 512M samples onboard pattern memory Number of output channels: 4, 8, 16 Maximum data transfer rate: 100MB/s (depends on your LAN environment) Trigger modes: Edge, Level, Window, OR/AND Waveform generation modes: Single, Single Repeat, Repeat, Multi, Gated, Sequence, FIFO …

• Signal Generator

Spectrum's AWG (Arbitrary Waveform Generator) with a resolution of 16 bits, a maximum sample rate of 125 MS/s, and a maximum bandwidth of 70 MHz.

That AWG (Arbitrary Waveform Generator) can be purchased at an affordable price of less than half that of standalone types. It can easily be integrated with a digitizer for coordinated operation. Synchronous operation with up to 16 cards (128 outputs) is possible. On May 15, 2019, two new 8-channel versions were added. On November 26, 2019, six new high-output voltage versions were added. Sample Rate: 40MS/s, 125MS/s Output Bandwidth (-3dB): 70MHz, 40MHz, 5MHz, 1MHz Number of Output Channels: 1, 2, 4, 8 Number of Output Channels (High Output Voltage Version): 1, 2, 4 Output Voltage Level: ±1mV to ±3V, 1mV step (50Ω load) ±2mV to ±6V, 2mV step (High Impedance Load) Output Voltage Level (High Output Voltage Version): ±1mV to ±6V, 1mV step (50Ω load) ±2mV to ±12V, 2mV step (High Impedance Load) Resolution: 16 bit Onboard Memory: 512M samples

• Signal Generator

Explaining the features of "AWG," which generates the necessary analog waveforms for experiments, measurements, and inspections!

We are currently offering a document summarizing the role and applications of "AWG," which is active in various measurements, as well as basic knowledge about its collaborative operation with digitizers. (*You can view it immediately by clicking the "PDF Download" button.) [Contents (partial)] ■ What is AWG? ■ Basic performance and applications of AWG ■ Collaborative operation of AWG and digitizers ■ AWG waveform generation modes ■ Differences from pulse (function) generators, etc. Additionally, our company handles a wide range of "AWG" products from Spectrum. The new product 'M2p.65xx' supports 8-channel output and features an expandable board type, achieving a more affordable price compared to standalone types. (*The product catalog is in English. Please contact us for more details.)

• oscilloscope

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

It is possible to finish R-shaped parts that cannot be done with a centerless process seamlessly. This is ideal for streamlining and reducing labor in the finishing process. It is also possible to remove scale and perform finishing polishing using sanding belts or non-woven fabric buffs. By having robots handle the products, automation of mass-produced items is also possible.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Tokai Rock, a group company of Koyama Co., Ltd. located in Numazu City, Shizuoka Prefecture, relocated its headquarters and factory at the end of last year and is now operating at full capacity with new equipment. At Tokai Rock, we protect our customers' screws from "loosening" and "deflection" over time by applying adhesive to the screw parts. We accommodate small lots, a variety of products, and short delivery times. Additionally, as a certified factory of the major adhesive manufacturer Henkel, we provide comprehensive support for environmental surveys and material certifications. Please feel free to contact the Development Sales Department of Koyama Co., Ltd. at ☎03 (3363) 3711.

We are pleased to announce the establishment of the "Kyushu Sales Office" aimed at strengthening our business foundation in the Kyushu area. With the opening of the new sales office, we will be able to respond more quickly and flexibly to our customers in the Kyushu region, while enhancing our support system that is closely connected to the local community. We will also deepen our collaboration with local partner companies, aiming for further growth of our business while strengthening our trust relationship with the community. We kindly ask for your continued support for the Kyushu Sales Office and our company. Thank you very much. 【Kyushu Sales Office Overview】 Establishment Date: January 1, 2026 Company Name: BM Nagano Co., Ltd. Kyushu Sales Office Location: 1-15-20 Hakataekimae, Hakata Ward, Fukuoka City, Fukuoka Prefecture, 812-0011, NMF Hakataekimae Building 2nd Floor