■Introduction to Tribology Products and Our Laboratory■

Automatically measures the traction (friction) coefficient in boundary lubrication, mixed lubrication, and elastohydrodynamic lubrication.

【Product Overview】 The MTM Traction Tester is a tabletop friction and wear testing machine of the ball-on-disk type provided by PCS Instruments in the UK, and it is adopted as a standard device in the lubricants and additives industry. By optimizing friction characteristics, it significantly enhances performance and helps reduce operational costs. 【Features】 It is capable of sliding test specimens of various materials and shapes within a slip rate range of ±10,000%. By using the optional 3D-SLIM, it is possible to observe the formation process of the tribofilms. 【Main Evaluation Contents】 Stribeck curve (friction coefficient × rolling speed) Traction curve (friction coefficient × slip rate) Tribofilm measurement *Optional

• Testing Equipment and Devices

The oil film thickness in the elastic fluid lubrication state is measured using the principle of optical interference.

【Product Overview】 The EHD Oil Film Thickness Tester is a tabletop fully automatic oil film thickness testing machine provided by PCS Instruments in the UK, and it is the successor model to the already proven EHD1. 【Features】 It is capable of measuring thinner films (minimum oil film thickness of 2nm) than conventional optical interference methods. By using the optional 3D-SLIM, it is possible to analyze the oil film thickness distribution across the entire contact area. 【Main Evaluation Contents】 Oil film thickness Stribeck curve (friction coefficient × rolling speed) Traction curve (friction coefficient × slip ratio) Oil film thickness distribution *Optional

• Coating thickness gauge

Reproducing rolling contact fatigue (RCF) due to pitching under lubricated/non-lubricated conditions.

【Product Overview】 The MPR Pitching Test Machine is a three-cylinder testing device provided by the UK company PCS Instruments, which generates pitching in a short time by increasing the contact cycles. 【Features】 Compared to general fatigue wear testing machines, it is compact and requires a smaller sample size for testing, making operation simple. In addition to stopping the test based on arbitrary parameters, it allows for interruption and resumption for surface observation of the test specimen. 【Main Evaluation Content】 Fatigue wear testing

• Testing Equipment and Devices

Establish a parts and consumables storage to strengthen the after-sales service system. 【Conduct operational training and demonstrations!!】

The measurement instrument showroom established in 2008 was renewed in 2015, and we conduct operational training and demonstrations. 【About the Permanent Equipment】 ◇ Tribology Testing Machines from UK-based PCS Instruments ◇ ■ MTM Traction Testing Machine ■ EHD Oil Film Thickness Testing Machine ■ USV High Shear Viscometer ■ MPR Pitching Testing Machine ■ ETM High Load Traction Testing Machine ◇ UV Water Sterilization Device from Israel's Atlantium ◇ ■ HOD System *We have newly installed actual machines for demonstration tests, so please feel free to contact us when considering testing machines!

• others

For applications in beverages, aquaculture, water supply and drainage, cooling water, boiler water, and biofouling. A laboratory for conducting operational training and demonstrations is also available.

The "Hydro Optic Disinfection System" manufactured by Israel's Atlantium is a UV water sterilization device developed under a completely different concept based on fluid dynamics and optical theory, capable of addressing various types of bacteria, viruses, larvae, and protozoa. Please use it at final disinfection points for drinking water, aquaculture, water supply and drainage, cooling water, boiler water, and biofouling, where a reliable high sterilization rate is required. Additionally, it has the functionality and performance to serve as an alternative to thermal sterilization and disinfection filters, making it a groundbreaking device that can be used as a reliable sterilization method in fields where conventional UV sterilization devices cannot be applied. Moreover, it is easy to handle and the sterilization cost is less than one-tenth. *We have a catalog with examples of deliveries available, so please be sure to download it!

• Testing Equipment and Devices

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Parking space management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, enabling efficient parking lot operations. For large parking lots, we recommend the "Floor Management Method" and "Block Management Method," which focus on cost reduction. Sensors are installed at regular intervals to count and manage the number of passing vehicles. This method offers the advantages of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 For smaller facilities, we recommend the "Parking Space Management Method," where sensors are installed in each parking space to display availability with high accuracy. By providing reliable occupancy information, this method helps reduce unnecessary entry of new vehicles and ensures safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

To everyone who wants to develop new chocolate products without worrying about the soaring cocoa prices. Cluster products that enhance texture, aroma, and appearance while reducing the amount of chocolate used, adding value to the products. We offer three types of cluster manufacturing equipment that can be selected according to your application and goals. We can propose the most suitable equipment based on your objectives. 1) K&S / GFT | One-bite snack & cereal bar molding machine 2) Trkino / Nuts-i | High-end depositor that can deposit ingredients like nuts together 3) Wolf / PORTIOMAT – CLUSTER FORMING | Cluster former equipped with innovative technology

Los Angeles (California, USA) / Paris (France), May 4, 2026 - (JCN Newswire) - Pacific Avenue Capital Partners, a global private equity firm focused on corporate carve-outs and other complex transactions in the mid-market, announced today that its affiliate has entered into exclusive negotiations to acquire ESE World (hereinafter "ESE") from Amcor, one of the world's leading packaging companies. With the support of Pacific Avenue, ESE will focus on responding to customer needs while implementing multiple growth initiatives related to operational improvements, regional expansion, and strategic add-on acquisitions. Pacific Avenue plans to work closely with ESE's existing management team to drive these initiatives and accelerate the company's next phase of growth.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)