We have published Construction Case Study No. 22 for ProSeven Seismic Mats and Fittings.

Anchor construction is no longer necessary. We provide safety and peace of mind in the workplace with seismic fittings for inspection devices, measuring devices, and analytical devices in inspection rooms and laboratories!

Is your office or factory's earthquake reinforcement sufficient? It is necessary to prepare to minimize damage in the event of an earthquake! Our earthquake countermeasures are ideal for inspection devices, analysis devices, and measuring devices installed on desks! With Pro Seven, you can easily implement earthquake countermeasures and prevent tipping by simply sticking it to the bottom! Ensure safety and peace of mind in the workplace with Pro Seven's earthquake mats and fittings! 【Features】 - Simply attach to the side of the target object - Significantly reduces traditional installation time - Absorbs distortion of equipment panels and other items with a special floating mechanism (PSD series) - No noise or dust during installation 【Target】 - Compatible with equipment that prioritizes level, such as inspection devices! 【Usage】 - Installation can be done by inserting from the side without moving the device! *For more details, please request materials from "Contact Us" or use the "PDF Download" on 'Ipros Manufacturing'.

• Anti-vibration, earthquake-proof, vibration-isolating devices
• Other safety and hygiene products
• mat

For preventing the tipping of metal racks in factories and warehouses! Tipping prevention device that does not require drilling and does not damage the floor.

The Pro7 "Shelf Belt Stopper" is an ideal seismic fixing device for earthquake measures on metal racks in factories and warehouses. It can be installed without lifting and is easy to construct. Of course, no tools are required. Since it does not require drilling and leaves no adhesive marks, it can be reused without worrying about damaging the floor or other surfaces. 【Features】 ■ Installation without lifting ■ Easy installation without tools ■ No need for drilling work ■ Installation without noise or dust ■ Easy to move by removing the belt ■ Reusable 【Video Available】 We have released a video of the seismic test. Please take a look. *For more details, please request materials from "Contact Us" or use the "PDF Download" on "Iprosu Monozukuri."

• Anti-vibration, earthquake-proof, vibration-isolating devices
• Other safety and hygiene products

For preventing office furniture from tipping over! An earthquake-resistant bracket that requires no drilling and is easy to install without lifting.

Proseven's "Cabinet Earthquake Resistance Fittings" are effective products for preventing the tipping of office furniture such as cabinets and lockers. They can be installed without lifting the furniture by securing them to the wall and the top panel. There is no need for drilling work, and no tools are required for easy installation. They can be reused without leaving adhesive marks. 【Features】 ■ Compatible with seismic intensity class 7 (equivalent to 1000 Gal) ■ Installation without lifting ■ No drilling work required ■ No tools needed ■ Easy to install and remove ■ Reusable without leaving adhesive marks 【Video Available】 We have released a video of the earthquake resistance test. Please take a look. *For more details, please request materials through "Contact Us" or use the "PDF Download" on "Ipros Manufacturing."

• Anti-vibration, earthquake-proof, vibration-isolating devices
• Other safety and hygiene products

"Anchor construction is no longer necessary" - Earthquake measures that do not require drilling holes in the floor! Since dust and noise are not generated during installation, it is suitable for seismic resistance in clean room facilities!

Is the earthquake countermeasure for factory equipment thorough? Seismic construction through anchor work is suitable for clean rooms where dust and noise generation are issues, as well as for production lines with frequent equipment relocations. The new material product "Proseven Seismic Mat," which combines the properties of both solid and liquid GEL with ultra-adhesiveness and ultra-low elasticity, is designed to withstand seismic intensity of level 7 with seismic fittings tailored to the equipment. We also offer seismic fittings for analytical instruments, measuring devices, equipment with casters, shelving units, cabinets, lockers, and pipe frames. 【Features】 ■ Compatible with seismic intensity level 7 ■ Easy installation by simply laying it down. No installation work such as anchoring is required, and it is removable ■ Can be slowly peeled off without damaging the installation surface or the object surface ■ Accommodates shaking in all directions: front-back, left-right, and up-down ■ Adhesive strength is restored by washing with water, allowing for repeated use ■ Applicable temperature: -20°C to 75°C, suitable for a wide range of environments ■ We will propose seismic fittings based on seismic calculations considering the weight and shape of the equipment *We will introduce you to a Proseven certified seismic construction company for installation work.

• Anti-vibration, earthquake-proof, vibration-isolating devices
• Other safety and hygiene products

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

We will be exhibiting at the "New Manufacturing and New Services Exhibition for Small and Medium Enterprises" from December 16 (Tuesday) to 18 (Thursday), 2025. Please feel free to stop by our booth. We look forward to meeting everyone.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

Would you like to have that product certified as "Accredited calibration"? Our company conducts calibration of pressure category "leak gauges" as a registered business under the Measurement Law Calibration Business Registration System (JCSS). Additionally, we are accredited by the Japan Accreditation Board (JAB) as a calibration organization compliant with the international standard ISO/IEC 17025, and we perform calibration of "flow rate," issuing calibration certificates with symbols. Fukuda is an accredited calibration organization compliant with international MRA.