★★Update★★★ I tried mixing #ToughLightRG and #BalChipMK with reinforced fiber.★★★

By mixing Balchip MK and Toughlight RG for mortar spraying, the crack occurrence rate in mortar structures is further reduced!

The mortar reinforcement fiber mixed spraying proposed by K.F. involves mixing polypropylene fibers for mortar reinforcement, "Varchip MK," with crack suppression polypropylene short fibers, Toughlight RG, and spraying them. This method reduces the crack occurrence rate in mortar structures, thereby enhancing durability and lowering lifecycle costs. By performing mixed spraying of reinforcement fibers on slopes and other areas, a more lasting weed suppression effect can be expected. 【Why is the crack occurrence rate reduced?】 Reinforcement fibers have various characteristics depending on their type, each with its own advantages and disadvantages. "Varchip MK" has a longer fiber length and a rough surface, allowing the mortar to cling to each fiber, making it difficult to pull out and providing crack prevention effects (cross-linking effect). Additionally, as the bending toughness increases, it is possible to omit the wire mesh and reduce the spraying thickness. However, since each fiber is long and thick, the adhesion area within the mortar decreases.

• Other consumables
• others

Project duration and cost reduction possible! This is a lightweight mortar reinforcement fiber that is easy to transport and add compared to steel fibers.

Keif handles products such as polypropylene fibers and vinylon fibers, which are compatible with concrete. "Mortar reinforcement fibers" have good adhesion to cement, making it difficult for cracks to form, and if cracks do occur, they help suppress their growth. The binding force of the mortar reinforcement fibers reduces the weakening of the structure during freezing, improves freeze-thaw resistance, and enhances long-term durability. 【Advantages of Reinforcement Fibers】 ■ In surface work, the lath application can be omitted, reducing construction time and costs. ■ Compared to steel fibers, they are lightweight, making transportation and addition easier. ■ Being organic fibers, they do not rust and maintain aesthetic appeal. 【Expected Application Scenarios】 ■ Sprayed concrete (surface work, tunnels) ■ Secondary lining ■ Painting work, etc. 【Products Handled】 ■ Kratec ■ Valtip MK, etc. *For more details, please refer to the PDF titled "A Must-See for Surface Work Contractors! Comparison Table of Mortar Reinforcement Fiber Method and Conventional Methods."

• fiber
• others

It is a polypropylene fiber for mortar reinforcement that excels in workability and chemical resistance.

For crack suppression in slope construction! NETIS registration number: KT-100021-VE. ■ Lightweight and excellent workability. With a density of 0.91g/cm3, it is light and easy to transport and mix. ■ Excellent chemical resistance and rust-free. It has superior alkali resistance and durability. ■ Adhesion to concrete. Embossed processing and hydrophilic treatment improve adhesion and enhance bending toughness. ■ Environmentally friendly. It does not produce dioxins (chlorine gas) when burned. 【Proposal: Weed prevention using reinforced fiber mixed spraying】 At K-F, we propose "weed prevention work using mortar reinforced fiber mixed spraying." Mortar reinforced fiber mixed spraying involves mixing polypropylene fibers for mortar reinforcement, "Balchip MK," with crack suppression polypropylene short fibers, Toughlight RG, and spraying them to further reduce the crack occurrence rate in mortar structures, thereby enhancing durability and reducing lifecycle costs. By performing reinforced fiber mixed spraying on slopes, such as at the base of the slope, more lasting weed prevention effects can be expected.

• others

For suppressing shrinkage cracks in sprayed mortar! Safe material made of polypropylene! Crack-suppressing short fibers that can be mixed with a mixer.

Crack-inhibiting polypropylene short fibers, Toughlight, are processed into bundles, making them less likely to scatter and less likely to pierce the skin. Furthermore, since polypropylene is the material used, no toxic gases are generated during combustion, making it a highly safe crack-inhibiting short fiber. 【Incorporation Effects】 ● Reduces scattering and collapse during spraying ● Reduces shrinkage cracks caused by temperature changes and drying during the curing period 【Excellent Workability】 ● Easily mixed with a conventional mixer ● Generates few fiber balls and has high degradability ● The flow value remains unchanged with the incorporation of Toughlight, maintaining fluidity ● During spraying operations, fibers do not pierce like needles due to rebound There are many other features as well! For more details, please contact us or download the catalog to view. 【Proposal: Weed Control through Reinforced Fiber Mixed Spraying】 At K.F., we propose "Weed Control Work through Mortar Reinforced Fiber Mixed Spraying." Please check the basic information section below for details.

• Other polymer materials
• others

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Features: ● Equipped with Intel 13th generation Core i3-1320PE/i5-1340PE/i7-1370PE ● Equipped with Intel Iris Xe graphics ● DDR5 SODIMM x 2 slots, expandable up to 96GB (sold separately) ● Supports dual HDMI video output ● Equipped with 2.5G LAN x 5 (4 ports support IEEE802.3 at PSE) Maximum power supply capacity when using DC12V–18V power: 20W (total for 4 ports) Maximum power supply capacity when using DC19V–36V power: 60W (total for 4 ports) ● Wide range 9–36V DC power input (terminal block type) ● Operating temperature range -25–60°C ● Onboard TPM 2.0 * This model does not include memory, storage, or OS.

Features ● Intel Core i3-1320PE/i5-1340PE/i7-1370PE ● DDE5 SODIMM x 2 (up to 96GB) (sold separately) ● 2.5 GbE x 5 (including 4 PoE ports) ● PCIe [x1] Slot x 1 & PCI Slot x 1 for expansion ● DC power input compatible with 9V to 36V ● Wide temperature operation range -20℃ to 60℃

Features: ● Compatible with Intel Core Ultra processors (Series 2) ● A1 SKU: Intel H810 chipset A2 SKU: Intel Q870 chipset ● Intel Xe LPG graphics engine ● DDR5 SODIMM ×2, up to 96GB (sold separately) ● HDMI 2.0 ×2 ● 2.5GbE LAN ×2, 1GbE LAN ×1 ● 10V–35V DC input (4-pin terminal block) ● Wide temperature range: -25°C to 60°C ● Equipped with TPM 2.0 ● Supports iAMT (A2 SKU only) * This model does not include memory, storage, or OS.

At the "11th Monozukuri World Nagoya" held at Port Messe Nagoya from April 8 (Wednesday) to April 10 (Friday), we will be showcasing various inspection products at the booth of FOVA Tech, a sales company of the Duplo Group. In the manufacturing industry, addressing labor shortages, along with achieving both productivity improvement and quality stabilization, has become an important management challenge. Our company has set the realization of a "manufacturing site that does not rely too much on people" as our development philosophy, and we have been advancing the development of automation equipment that possesses flexibility and high expandability, making it easy to adapt to existing lines. In this exhibition, we will showcase automation solutions that can optimize multiple processes integrally, and you will be able to confirm specific operational images after implementation.