We have published Construction Case Study No. 27 of ProSeven Seismic Mats and Fittings.

For preventing the tipping of metal racks in factories and warehouses! Tipping prevention device that does not require drilling and does not damage the floor.

The Pro7 "Shelf Belt Stopper" is an ideal seismic fixing device for earthquake measures on metal racks in factories and warehouses. It can be installed without lifting and is easy to construct. Of course, no tools are required. Since it does not require drilling and leaves no adhesive marks, it can be reused without worrying about damaging the floor or other surfaces. 【Features】 ■ Installation without lifting ■ Easy installation without tools ■ No need for drilling work ■ Installation without noise or dust ■ Easy to move by removing the belt ■ Reusable 【Video Available】 We have released a video of the seismic test. Please take a look. *For more details, please request materials from "Contact Us" or use the "PDF Download" on "Iprosu Monozukuri."

• Anti-vibration, earthquake-proof, vibration-isolating devices
• Other safety and hygiene products

For preventing office furniture from tipping over! Earthquake-resistant brackets that require no drilling and are easy to install.

ProSeven's "Cabinet Earthquake Resistance Fittings" are effective products for preventing the tipping of office furniture such as cabinets and lockers. They can be installed without lifting the furniture by securing them to the wall and the top panel. There is no need for drilling work, and no tools are required for easy installation. They can be reused without leaving adhesive marks. 【Features】 ■ Compatible with seismic intensity of level 7 (equivalent to 1000 Gal) ■ Installation without lifting ■ No drilling work required ■ No tools needed ■ Easy to install and remove ■ Reusable without leaving adhesive marks *For more details, please request materials from "Contact Us" or use the "PDF Download" on "Ipros Manufacturing."

• Anti-vibration, earthquake-proof, vibration-isolating devices
• Other safety and hygiene products

"Anchor construction is no longer necessary" - Earthquake measures that do not require drilling holes in the floor! Since dust and noise are not generated during installation, it is suitable for seismic resistance in clean room facilities!

Is the earthquake countermeasure for factory equipment thorough? Seismic construction through anchor work is suitable for clean rooms where dust and noise generation are issues, as well as for production lines with frequent equipment relocations. The new material product "Proseven Seismic Mat," which combines the properties of both solid and liquid GEL with ultra-adhesiveness and ultra-low elasticity, is designed to withstand seismic intensity of level 7 with seismic fittings tailored to the equipment. We also offer seismic fittings for analytical instruments, measuring devices, equipment with casters, shelving units, cabinets, lockers, and pipe frames. 【Features】 ■ Compatible with seismic intensity level 7 ■ Easy installation by simply laying it down. No installation work such as anchoring is required, and it is removable ■ Can be slowly peeled off without damaging the installation surface or the object surface ■ Accommodates shaking in all directions: front-back, left-right, and up-down ■ Adhesive strength is restored by washing with water, allowing for repeated use ■ Applicable temperature: -20°C to 75°C, suitable for a wide range of environments ■ We will propose seismic fittings based on seismic calculations considering the weight and shape of the equipment *We will introduce you to a Proseven certified seismic construction company for installation work.

• Anti-vibration, earthquake-proof, vibration-isolating devices
• Other safety and hygiene products

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

We will be exhibiting our products at "JECA FAIR 2026 (the 74th Electrical Construction Exhibition)" held at Tokyo Big Sight. At this exhibition, we will be jointly exhibiting with Mibu Electric Manufacturing. Our booth will focus on the "Panel Manufacturing Skill-less Solution," which addresses the labor shortage issues in panel manufacturing that have required skilled workers, enabling less experienced operators to achieve high-quality manufacturing in processes such as wire processing, component assembly, and wiring work. We will also introduce various other products. We invite you to visit our booth during your visit. ■ Exhibition Name: JECA FAIR 2026 (the 74th Electrical Construction Exhibition) ■ Location: Tokyo Big Sight, Halls 1-3 ■ Booth Numbers: 1-01 ECAD Solutions, 1-02 Joint Exhibition with Mibu Electric Manufacturing ■ Dates: May 27 (Wednesday) - May 29 (Friday), 2026, for three days ■ Hours: May 27 (Wednesday) 10:30 AM - 5:00 PM May 28 (Thursday) 10:00 AM - 5:00 PM May 29 (Friday) 10:00 AM - 4:30 PM *For more information about the exhibited products, please download the materials. Feel free to contact us with any inquiries.

We would like to express our gratitude for your continued support and announce a campaign where you can purchase consumables at a great price. We will offer various consumables that need to be replaced regularly for high-precision and stable analysis, as well as safe decomposition work, at a special price of 20% off. For more details, please refer to each leaflet.

We will be temporarily closed on the following dates due to employee training. We apologize for any inconvenience this may cause and appreciate your understanding. ■ Closure Period June 11 (Thursday) to June 12 (Friday), 2026, all day ■ Regarding Orders 1) Orders placed after June 10 (Wednesday) will generally be shipped on or after June 16 (Tuesday) or June 17 (Wednesday). 2) Orders can be placed anytime on the 【FOSS WEBSHOP】. The official delivery date will be communicated after June 15 (Monday). 3) Please specify your "desired delivery date" when placing an order. 4) In case of emergencies, please contact us not only by sending the order form but also by phone. ■ Regarding Customer Support During the closure, any malfunctions or issues will be accepted via email or voicemail. Please provide detailed information including "model name," "serial number," "symptoms," "contact person's name," and "contact information." Our customer support will contact you in the order of receipt. E-Mail: service@foss.co.jp Contact: 03-5962-4811 Reception Hours: 9:00 AM to 5:00 PM