[5thAXIS Latest Catalog] The No. 1 Popularity in the U.S.! Quick Change Vise for 5-Axis Machining

Quick change system vise and base 'RockLock' for 3 to 5 axis machining centers, patented.

5thAXIS Quick Change Vise & Base A wide range of small to large vises. Minimal interference and high clamping force. This is a quick change vise that can be utilized in various situations. <Features> - A "Quick Change Vise" specialized for 3 to 5-axis machining centers with minimal interference. - Allows for quick setup changes when combined with the "Quick Change Base" fixed to the table. - By machining a dovetail (groove), it can clamp powerfully with just a 3mm gripping margin. We have prepared applications that can be utilized in various situations with the RockLock base, which is compatible with many systems. The small, high-clamping dovetail system is also well-received. It is effective in situations involving multiple parts using 3 to 5-axis machines. ◎ We also offer demo support! Please feel free to contact us.

• Processing Jig
• Machining Center
• Vice Clamps

Shaft components, disk and flange components, bar materials, gear components, and various other automotive parts, as well as hydraulic equipment parts and special-shaped materials are also supported.

1. High rigidity: Maximum clamping force 150 kN (standard) 2. High gripping power: Minimum clamping width 2 mm (standard) 3. High setup efficiency: Collet change time: 30 seconds 4. Repetition position accuracy: 0.010 mm 5. There is no metal connection in the collet, allowing for strong clamping. 6. Various components are designed and manufactured domestically, and we respond to various requests.

• Processing Jig
• Machining Center
• Chuck

Shaft components, disc and flange components, bar materials, gear components, and various other automotive parts, as well as hydraulic equipment parts and irregular materials are also supported.

1. High rigidity: Maximum clamping force of 150 kN (standard) 2. High gripping power: Minimum clamping width of 2 mm (standard) 3. High setup efficiency: Collet change time: 30 seconds 4. Repeat position accuracy: 0.010 mm 5. There is no metal connection to the collet, allowing for strong clamping. 6. Clamping around the entire workpiece results in minimal distortion. 7. Various components are designed and manufactured domestically, and we respond to various requests.

• Processing Jig
• Machining Center
• Chuck

Space-saving design! Vertical machining center capable of simultaneous 5-axis machining.

The UMC series vertical simultaneous 5-axis machining center from Haas is the most compact and affordable model. It features a self-developed high-speed spindle with a maximum rotation speed of 15,000 min-1, and a φ400 mm rotary table that newly adopts cycloidal gear drive, achieving high precision and high rigidity in the control of the rotating axes (B and C). It comes standard with a side-mount tool changer that holds 30 tools plus 1 additional tool (with an option to accommodate up to 50 tools). Additionally, it is equipped with a Renishaw touch probe and calibration fixtures as standard, allowing for easy setup. It offers the best cost performance among simultaneous 5-axis machining centers. 【Features】 ■ Reduces setup time for multi-surface machining and complex part processing ■ Improves machining accuracy ■ Provides excellent cost-effective solutions ■ Offers a wide range of high-productivity options

• Other machine tools
• Machining Center

High-precision and complex processing is possible with 2D and 3D! Extremely compact and easy to move! This is a super compact machining center that can also be used in stores and offices.

The CM-1 is a compact, high-precision machining center manufactured by Haas, with a small footprint. It is capable of high-precision and complex machining for prototype parts and components in telecommunications, medical, and aerospace industries, using both 2D and 3D processes. Due to its very compact size, it can be easily moved with a hand lift or cart. Additionally, by attaching a rotary table (TRT70), two additional axes can be added, allowing it to be used as a high-speed, precise 5-axis machining center. 【Features】 ■ High-performance and stable spindle ■ Equipped with a high-quality wireless probing system ■ Various functions can be added to the control unit *For more details, please refer to the PDF document or feel free to contact us.

• lathe

This is the high-speed specification standard model of the VF series vertical machining center, a bestseller from Haas.

Haas Automation is the largest machine tool manufacturer in the Western Hemisphere, based in California, USA. They produce over 1,200 units per month and currently rank second in the world in terms of production numbers for vertical machining centers and CNC lathes. All Haas products are designed from the operator's perspective, resulting in a simple and user-friendly design. Additionally, the sales prices for all products, including machinery, are listed on their website, allowing customers to calculate costs in advance when considering equipment acquisition. 【Specifications】 ○ Spindle Taper: BT40 ○ Travel: 762×406×508mm ○ Table Size: 914×356mm For more details, please contact us or download the catalog.

• Machining Center

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.