Heishin Web Exhibition Part 2! -For the Automotive and Car Electronics Industry-

The basic structure is the same as the "Mohno Pump," a progressing cavity pump! It achieves high-precision application even with high-viscosity liquids and high-concentration slurries.

The basic structure of the Mohno Dispenser is a progressing cavity pump of the same rotary volumetric type as the Mohno Pump. This structure allows for the instant discharge of high-viscosity liquids and precise application. The Mohno Dispenser, which achieves improved product quality and reduced cycle time, is active in various industries such as electronics, food, automotive, and cosmetics. [Features] - Instant discharge of high-viscosity liquids up to 1,000,000 mPa·s and high-concentration slurries - Prevents liquid dripping during stops, keeping the workpiece and surroundings clean - Less affected by changes in the state of the liquid, enabling stable application over long periods - Easy setting and adjustment of discharge volume through servo motor control - Achieves quality improvement by accurately applying the necessary amount [Examples of Discharged Liquids] Two-component adhesives, silicone resins, metal pastes, solder pastes, thermal grease, thermal silicone, liquid gaskets, UV-curable adhesives, epoxy resins, conductive adhesives, various slurries, mastic sealers, hemming sealers, steel plate reinforcements, shampoos, lipsticks, emulsions, cold packs, chocolate, whipped cream, seasoning liquids, and more. *For more details, please refer to the PDF catalog or website, or contact us.

• dispenser

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Parking space management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, enabling efficient parking lot operations. For large parking lots, we recommend the "Floor Management Method" and "Block Management Method," which focus on cost reduction. Sensors are installed at regular intervals to count and manage the number of passing vehicles. This method offers the advantages of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 For smaller facilities, we recommend the "Parking Space Management Method," where sensors are installed in each parking space to display availability with high accuracy. By providing reliable occupancy information, this method helps reduce unnecessary entry of new vehicles and ensures safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensors wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors wirelessly notify in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x1, eDP x1, DP x1, HDMI x1 ● LAN x3, SATA 6Gb/s x1, 8-bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● M.2 2280 M-Key x1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.