We are looking for new applications for the heating furnace!

A high-performance eco machine that pursues the coexistence of reflow performance and eco-friendliness. *Free distribution of the handbook "Characteristics of Far Infrared Reflow" is ongoing!

The UNI-6116S is a reflow oven that thoroughly pursues miniaturization. Most of the delivered units are used in clean environments. It adopts a heating method that combines hot air circulation and far-infrared radiation. It is an energy-saving, lead-free compatible model. 【Features】 ○ All heating zones can be set to 350°C ○ High-output heaters are used in the reflow zone ○ Suitable for high melting point solder and AuSn bonding ○ Significantly reduces power consumption ○ Nitrogen-compatible furnace For more details, please contact us or download the catalog.

• Reflow Equipment

We are looking for 'it might be useful'. Please feel free to contact us.

In recent years, in addition to implementation applications, we have been expanding our presence in the fields of drying, curing, and heat treatment. We have included some applications and specifications in the catalog data. We are looking for words of interest and applications or ideas that might be useful!

• Drying Equipment

Opportunity to introduce a new reflow oven at the same price as a used reflow oven!

Recently, many customers have started considering inexpensive used reflow ovens, but the reality is that many of them have become embroiled in troubles caused by the introduction of used reflow ovens. It is likely that due to the current economic situation and budget constraints, most customers feel they have no choice but to opt for inexpensive used reflow ovens. Conversely, if it were possible to introduce a new reflow oven for the same amount of money as a used one, there would be no reason to choose a used reflow oven. In that case, naturally, you would also be able to receive the manufacturer's warranty, and you could use the reflow oven with peace of mind, free from the risks associated with introducing a used reflow oven. We believe that preventing further customers from suffering significant losses due to the introduction of inexpensive used reflow ovens is our mission as a specialized reflow oven manufacturer with 44 years of accumulated technology and experience. This is why we have decided to sell the high-performance compact conveyor reflow oven UNI-5016A. For more details, please contact us or download the catalog.

• Reflow Equipment

Attention implementation engineers!! "Characteristics of far-infrared reflow" is available for free!!

This is a permanent edition created under the supervision of implementation advisor Kazuo Kawai, covering the principles of soldering and void countermeasures! Please take a look. Contents: 1. Principles of soldering 2. Characteristics of reflow ovens and temperature profiles 3. Effectiveness of void countermeasures 4. Reflow compatibility for fine parts

• Reflow Equipment

Featuring a variety of products, including a compact reflow device with a length of 780 mm designed for nitrogen compatibility!

We offer a wide range of products, including small heating furnaces (reflow ovens) with a length of 2m or less that are compatible with nitrogen! Antom has been a manufacturer of heating furnaces, primarily reflow devices, for 46 years since its establishment. Our comprehensive catalog features a variety of heating devices, focusing on our specialty in small heating furnaces (reflow). Additionally, we are committed to developing heating furnaces aimed at energy efficiency and space-saving to contribute to environmental conservation and improve our customers' operational efficiency. Based on SMT reflow device technology, we also provide overheating devices used for curing, drying, and screening. 【Example of Featured Products】 ■ Nitrogen-compatible small heating furnace "UNI-6116S" with a total length of 2m or less → Total length 1.6m / 6-zone heating / High-temperature compatible / Nitrogen compatible ■ Curing, drying, and heating device "HAS-1016" → Minimum / Total length under 1m / 1-zone uniform heating For more details, please contact us or download the catalog.

• Electric furnace

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.