Solving your soldering problems! ~Implementation Technology Case Studies~ Available for free!

Attention implementation engineers!! "Characteristics of far-infrared reflow" is available for free!!

This is a permanent edition created under the supervision of implementation advisor Kazuo Kawai, covering the principles of soldering and void countermeasures! Please take a look. Contents: 1. Principles of soldering 2. Characteristics of reflow ovens and temperature profiles 3. Effectiveness of void countermeasures 4. Reflow compatibility for fine parts

• Reflow Equipment

"I want to know the recent profile trends!" "I want to see examples of solder evaluation!" We will directly solve your problems related to soldering!

We have compiled a handbook of implementation technology-related case studies for engineers struggling with defect improvement in mass production sites. Supervised by Mr. Kazuo Kawai, who has achieved defect improvements in many sites as an implementation advisor. As implementation technology advances with the miniaturization and complexity of products, we present various recent case studies (with photos) on trends in profiles and soldering evaluations, reflecting the era that demands serious technical responses. This handbook is available for free to all engineers involved in implementation sites! 【Contents】 1. Recent trends in profiles 2. Creating temperature profiles 3. Evaluation of solder 4. Company overview *For more details, please download the PDF or feel free to contact us.

• Reflow Equipment

A high-performance eco machine that pursues the coexistence of reflow performance and eco-friendliness. *Free distribution of the handbook "Characteristics of Far Infrared Reflow" is ongoing!

The UNI-6116S is a reflow oven that thoroughly pursues miniaturization. Most of the delivered units are used in clean environments. It adopts a heating method that combines hot air circulation and far-infrared radiation. It is an energy-saving, lead-free compatible model. 【Features】 ○ All heating zones can be set to 350°C ○ High-output heaters are used in the reflow zone ○ Suitable for high melting point solder and AuSn bonding ○ Significantly reduces power consumption ○ Nitrogen-compatible furnace For more details, please contact us or download the catalog.

• Reflow Equipment

Adopts a heating method that combines hot air circulation and far infrared rays. It is an energy-saving, lead-free compatible device.

The "UNI-6116S" is the flagship model of Antom's heating furnace (reflow furnace) that has continued to meet various heating application demands for 46 years, featuring energy efficiency, space-saving design, cleanroom compatibility, and high-temperature resistance. [For companies interested in the UNI-6116S] We hold live demonstrations of the actual machine, so please make a reservation in advance if you are interested. Additionally, we can organize study sessions about Antom's heating furnaces (reflow furnaces) upon request, so feel free to consult with us. We have prepared separate materials regarding details on becoming a distributor, so please download the materials from the banner below.

• Reflow Equipment

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.