International Powder Technology Exhibition Tokyo 2020 (Powtex 2020) will be exhibiting again this year!

Low wear and high durability crusher. Multi-purpose, high performance, and low price with over 10,000 units sold.

The "Makino Type Crusher DD Series" features a directly connected rotating plate that reduces transmission loss, while also achieving cost reduction through simplified structure. The attached blades on the rotating plate are hardened, making them resistant to wear and providing excellent durability. Additionally, the shape of the blades has been modified from previous models to achieve further fine grinding. It is compatible with various raw materials such as ores, resins, gypsum, glass, and grains. 【Features】*For details, please refer to the catalog. ■ Achieved approximately 30% cost reduction (compared to our company) through structural simplification ■ No maintenance required for belt adjustments due to direct motor connection ■ Special cast steel used for blades extends the lifespan of consumables ■ Capacity increase is possible with only motor replacement ■ Consideration of blade arrangement reduces noise and airflow generation ■ Changing the rotation speed is easy with an inverter ◎ For more information, please refer to the PDF materials or feel free to contact us.

• Crusher

If it can be cut with scissors, it can be crushed.

We will cut thin materials such as sheets, wrapping films, paper, cloth, rubber, and thread-like raw materials using scissors. Anything that can be cut with scissors can be crushed. 【Features】 ○ Screen replacement is easy ○ Crushed materials can be handled in sheet or roll form ○ Wide sheets can be easily processed using a pickup machine ○ Cutting as fine as 0.005mm is possible For more details, please contact us or download the catalog.

• Plastic processing machines (cutting and rolling)

Fully cleanable mixing machine, ribbon mixer, sanitary specifications.

A mixing machine with a body casing that has a fully welded structure and can be completely cleaned. ■Features■ ■ The case is designed with a fully welded structure and a clever connection of the shaft to achieve complete cleaning. ■ The ribbon part is also designed with cleaning in mind. ■ The seals in the bearing section are made of a two-part resin for easy removal. ■ Volume: 50 to 1,500 liters (actual capacity). ■ Discharge methods: slide gate, swing gate, choke valve. ■ Materials: contact parts made of SUS304/316/316L; seal resin made of nylon and others. ■ For other functions and details, please download the catalog or contact us.

• Mixer/agitator

High-speed mixing of chemical products, resins, food, etc. A wide range of products in various sizes. Mixing tests are currently being accepted.

The "AVALONG High-Speed Mixer" mixes by stirring with rapidly rotating blades, enabling high-precision mixing in a short time due to its powerful convection and diffusion effects. It can achieve over 2000 rotations per minute, preventing uneven mixing. From a compact model with a total capacity of 15L to a large model of 1500L, you can choose from a wide range of products to meet your needs. It can be utilized for various purposes such as mixing, dispersing, drying, granulating, and surface modification. 【Features】 ■ Liquid addition during mixing is possible ■ Heating and cooling control through a jacket structure ■ Minimal internal residue, making cleaning easy when the lid is opened ■ Standard two-stage blades are incorporated, and four-stage blade specifications are also available *You can view product materials from the "PDF Download." ★ Mixing tests for your desired raw materials are possible. (Please prepare the raw materials.) For more details, feel free to contact us.

• Mixer/agitator

This is the comprehensive catalog for the plastic pellet foreign matter separation and removal machine, Pelatron Diduster.

We have followed the flow of nature. The pursuit of high-purity raw materials has led to the development of separation and classification technologies. Air cleaning of grains, corn, rice, and other foods has been practiced for thousands of years. Over the centuries, the need for efficiency in cleaning and separation/classification has led to the development of new technologies. The air cleaning, separation, and classification technologies in our latest machines are based on the same concept. For more details, please contact us or download the catalog.

• Food Conveyor Equipment
• Other process controls

Cleaning technology suitable for all pellets before product shipment, after transportation, and before manufacturing.

"Pelletron Didasters" is a super high-precision separation and removal device that efficiently separates and removes dust such as cutting chips, fines, powdery fluff, and strip fluff (which may mix in during processes like air transport) from pellets.

• Resin processing machine

Compact and lightweight design! It is effective for the separation and removal of foreign substances in pellets and feed!

The foreign matter separation and removal device "Diduster RC Series" is a compact type equipped with all the necessary functions, offering low price and low running costs. It is completely different from large separation devices that require conventional air transport systems, dust collectors, and other equipment. Inside the "Petron Diduster," products move primarily by gravity, resulting in excellent energy efficiency, and with fewer drive components, practical maintenance is unnecessary. 【Features】 ○ Excellent dust removal effect ○ New design with lightweight construction ○ Outstanding processing capacity (5kg/h to approximately 250kg/h) ○ Enables equipment at a low price! ○ Even more compact than conventional models For more details, please contact us or download the catalog.

• Hazardous material processing

Prevents damage to raw materials and streamer formation in pellets. It also leaves no residue due to its self-cleaning action.

"Pellbow" is an elbow pipe that reduces friction of bulk materials during air transport due to its unique structure. The materials accumulated in the pocket-like "impact zone" cover the collision area, preventing damage to the transported raw materials and the generation of streamers during resin pellet transport, thereby suppressing the occurrence of fine powders and damage to the piping. Its compact design minimizes piping space, making it more space-efficient than standard elbow pipes, and it can be customized flexibly. 【Features】 ■ Self-cleaning action leaves no residue ■ Compatible with various standard flanges and pipes ■ Contributes to low noise levels ■ Low pressure loss *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other processing machines
• Other process controls

Our company will be exhibiting at the "12th Annual Meeting of the Japanese Society for Extracellular Vesicles" to be held at the Senri Life Science Center. We will be showcasing various products during the event. We invite all relevant parties to come and visit us. 【Suppliers】 - Partical Metrix - Dynamic Biosensors

Theme: "Bringing Japan's Fermentation Technology to the World - Exploring the Essence of Koji Mold and Solid-State Cultivation, and Considering the Future Opened by Fermentation" [Content] Afternoon (13:00–17:00): Lectures and General Discussion ◆ Keynote Lecture 1: "Expansion of Koji Fermentation Applications Overseas" Takashi Sato, President, SAN-J International, Inc. ◆ Keynote Lecture 2: "Exploring the Diverse Functions Hidden in Koji Mold from a Genomic Perspective - Towards Understanding and Utilizing Solid-State Cultivation" Junichi Maruyama, Professor, Graduate School of Agricultural and Life Sciences, The University of Tokyo ◆ Lecture 1: "Initiatives of the Microbial Industry Course at Okayama University" Takashi Hara, Specially Appointed Assistant Professor, Microbial Industry Course, Okayama University ◆ General Discussion Panelists: Takashi Sato, President, SAN-J International, Inc. Junichi Maruyama, Professor, Graduate School of Agricultural and Life Sciences, The University of Tokyo Sanzaemon Murai, President, Bioc Co., Ltd. Masahiro Kariyama, Executive Director, Fujiwara Technoart Co., Ltd. Katsuya Gomi, Specially Appointed Professor, Graduate School of Agricultural Science, Tohoku University Coordinator: Hiroshi Kanzaki, Professor, Microbial Industry Course, Okayama University

[Lecture Items] 1. Initiatives on AI Law and Policy Cabinet Office, Office for Science and Technology Innovation, Artificial Intelligence Policy Promotion Office Deputy Director, Shiho Maeda 2. Initiatives by the Ministry of Internal Affairs and Communications for the Development and Utilization of Trustworthy Domestic AI Ministry of Internal Affairs and Communications, International Strategy Bureau, Technology Policy Division, Research Promotion Office, Deputy Director, Wataru Kumahara 3. Initiatives by the Ministry of Education, Culture, Sports, Science and Technology regarding AI for Science Ministry of Education, Culture, Sports, Science and Technology, Research Promotion Bureau, Advisor (Information), Deputy Director, Seiichiro Todoroki 4. Guidelines for AI Businesses Ministry of Economy, Trade and Industry, Commerce and Information Policy Bureau, Information Economy Division, International Coordination Officer for Governance Strategy, Sho Utagawa

[Lecture Topics] 1. Strengthening Japan's Cyber Response Capabilities Shingo Umi, Deputy Director, National Cyber Coordination Office, Cabinet Secretariat 2. The Situation of Threats in Cyberspace and Police Initiatives Fumika Iwasaki, Cyber Planning Division, Cyber Police Bureau, National Police Agency 3. Enhancing Cybersecurity in the Financial Sector Mitsuhiko Komura, Deputy Director, IT Cyber and Economic Security Management Office, Risk Analysis Division, Financial Services Agency 4. Cybersecurity Policy in the Information and Communications Sector Kiyohiro Samejima, Senior Deputy Director, Cybersecurity Coordination Office, Ministry of Internal Affairs and Communications 5. Cybersecurity Policy in the Industrial Sector Tomohiro Koyama, Section Chief, Cybersecurity Division, Commerce and Information Policy Bureau, Ministry of Economy, Trade and Industry

We will be holding a seminar on the utilization of electrical design data on Friday, November 7th. In addition to presentations from users who are actively utilizing ACAD-DENKI, we will introduce customization examples and announce new solutions from Zuken Alpha Tech. We hope this will help you solve challenges related to the utilization of data in electrical control design. ▶ Event details and registration https://www.alfatech.jp/seminar/acad-denki.html ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー Case presentations from users who are successfully utilizing data Tips for using ACAD-DENKI and announcement of new solutions ■ Date and Time 　Friday, November 7, 2025, 13:30 - 18:30 ■ Venue 　Tokyo Conference Center Shinagawa ■ Participation Fee 　Free (Pre-registration required) *Please register individually for each participant ■ Presenting Company 　Aitec Co., Ltd. ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー