Launch of a collaborative product between analog and digital radios!

Enhancing analog video quality: Full HD video with no delay or freezing! Made in Japan with technical standards certification, the transmitter is optimized for embedded use. Check it out now!!

◎ A collaboration product between the ultra-compact video transmission module (GTV-24TMS) and the analog-digital receiver (GTV-R1-HDCVBS), no license required. ★ If you have any questions or technical issues, please feel free to contact us via email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) ★★ Remote sensing refers to the technology that captures aerial footage from a distance to understand the surrounding situation and obtains quantitative information about the measurement target using sensors and measuring instruments. ★ The number of receivers that can be installed for one transmitter is virtually unlimited, similar to a radio (1:n). ★ Our uncompressed wireless devices can be used with image-related equipment, image processing, surveillance systems, and image transmission devices with 100% no delay! ● Video formats: 720p(60), 1080p(60), 4K(30/60). ● The size of the receiving monitor screen can be adjusted using a push switch. ● Equipped with an LED indicator to show the strength of the received signal. ● Maximum outdoor line-of-sight distance is approximately 500m.

• Other network tools

Enjoy 720p video in Full HD. Receive analog video 720P at 1080p. Achieve a smooth viewing experience with no delay or freezing!

【Overview Specifications】 ★ As an option, the receiver side can support full HD video output (1080p) instead of NTSC, and can collaborate with various receivers! ★ Both the transmitter and receiver have embedded modules available, allowing for the creation of custom wireless devices. The size of the uncompressed transmission module is 6.8 cm x 5.1 cm x 1.8 cm / weight 60g! ★ The advantages of uncompressed video transmission are "high quality (NTSC・720P)" with no freezing, "no delay," and "no compression distortion" during transmission and reception! ★★ If you have any questions or technical issues, please feel free to contact us via email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) [Features] ◎ The number of combinations between the transmitter and receiver can be 1:n (∞)! ● Technology has been acquired for NTSC and PAL high quality (720p・30f/s) operation on battery 006P. ● By using a high-gain antenna on the receiver side, the outdoor line-of-sight distance can exceed 500m. Note) Custom design for "Unmanned Mobile Image Transmission System" is possible!

• Surveillance Camera System

A wireless video transmission device designed from the perspective of the users on-site: "No delay, uncompressed, high quality, compact, energy-efficient, great cost performance, 3-year warranty, and compliant with technical standards!"

* Contributing to labor-saving in a mixed environment of analog and digital devices through collaboration! NTSC video is played back without delay or freezing with BNC connectors, and HD has HDMI connectors! Transmitter and receiver can also be combined in reverse! ★★ If you have any questions or technical issues, feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) "Features" ◎ Number of combinations with transmitter and receiver = 1:n (∞), made in Japan! ◆ No freezing or time lag; demo results: 100 out of 100 people were satisfied with the no-delay! ★ Use cases for uncompressed wireless devices include image-related equipment, image processing, surveillance systems, image transmission devices, etc.! ★ The analog (NTSC) terminal is a BNC receptacle, and the HD terminal is HDMI Type A. ★★ The format for receiving video resolution: 720p (60), 1080p (60), 4k (30/60) can be adjusted with a push switch, and the size of the received screen can be switched with the push switch operation. ★ "Technical compliance" has been obtained, and no license is required!

• Other network tools

Japan-made ultra-compact embedded transmission module: High-quality 720P with no delays or freezes. No license required, perfect for various applications. Click here for more details!

◎ Model Number = GTV-24TMS (Ultra-Compact Embedded Video Transmission Module) ◎ Collaborating with the Full HD Receiver (GTV-R-HDCVBS) to receive HD video or analog NTSC video with 100% no latency! ★ We offer wireless technology support for customers who want to build their own unique "Drone Aerial Photography System"! Please feel free to consult with us! Contact: https://efg94764.p-kit.com/page0010.html TEL = 090-4425-4901 (Kato) * A compact, uncompressed transmission module that allows you to view high-quality (NTSC, 720P) video by preparing a camera on the transmission side and a monitor on the reception side. 【Overview Specifications】 ★ No license required, already obtained technical compliance, no freezing, battery operation OK! ★ Compatible with various digital video signal connections. [Features] ◎ Number of transmitters and receivers can be combined = 1:n (∞)! ◆ Transmission delay time is on the order of μ (micro) seconds. ◆ Equipped with an LED indicator showing the strength of the received signal. ◆ High-gain antenna on the receiving side + relay transmission allows for outdoor line-of-sight with a range of over 1 km.

• Other network tools

The definitive version of business-use wireless radios! Trusted for 10 years, high performance with no delays or freezes. A long warranty period is a testament to reliability! Experience compact, energy-efficient products made in Japan!

The key specification of industrial wireless devices is that they have 100% no latency, not low latency. 【Features】 ★★ No time lag, unmatched, and non-compressed wireless device! ◎ Comprehensive after-sales support! The number of combinations with transmitters and receivers = 1:n (∞) is possible. ★ Our non-compressed wireless device can be used without delay for image-related equipment, image processing, surveillance systems, and image transmission devices. ★ The advantages of non-compressed video communication are 100% real-time "high quality (NTSC: 720P)" with no time lag or compression distortion between transmission and reception! [Features] ● Supports everything from general specifications to professional specifications with no latency wireless devices, already certified for technical standards! ◆ The receiver is equipped with a high-brightness blue LED indicator that shows the strength of the received signal. ● The transmission delay time between sending and receiving is on the order of μ (micro) seconds. ● Palm-sized, capable of continuous operation for 9 hours with a dedicated battery! ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)

• Communications

Achieve high-quality wireless transmission! Transmit video from USB memory or SD cards without delay using an uncompressed wireless device. Enjoy a comfortable video experience without freezes!

※ For business-use wireless devices, installation and after-sales support after purchase are very important. Please feel free to consult us! 【Features】 ★ Our uncompressed wireless devices can be utilized with image-related equipment, image processing, surveillance systems, and image transmission devices with 100% no delay. ★ As an option, the video output (NTSC: 720p) on the receiver side can be upgraded to full HD video output. ★ Both camera video and audio information are transmitted together, with certification obtained and no time lag! ★ There are no sudden interruptions or freezes in the video due to weather radar interference in the 5.8GHz band! ● Compatible with various digital video signals for connection! [Specifications] ◎ Number of transmitters and receivers that can be paired = 1:n (∞) combinations possible! ◆ Can be used with any camera system; simply connect AV cables and antennas for easy no-delay transmission. By the way, the transmission delay time is on the order of μ (micro) seconds. ◆ The receiver side is equipped with an LED indicator to show the strength of the received signal. ◆ This product comes with a 3-year warranty. ◆ Energy-efficient (3W), palm-sized, and does not require a license. ◆ By using a high-gain antenna on the receiver side, outdoor line-of-sight transmission distance exceeds 1 km.

• Surveillance Camera System

High-quality video with zero communication costs! No freezes, no time lag. Peace of mind with a 7-hour battery, made in Japan. Click here for details!

◎ Please compare with other companies' products! For details, please refer to the document "Use Cases for Uncompressed, Low-Latency Wireless Devices for Video and Audio." ◎ Our uncompressed wireless devices can be utilized with image-related equipment, image processing, surveillance systems, and image transmission devices with 100% no latency. ● Compatible with various digital video signal connections! ● No block distortion or video stoppage, achieving HD-quality video (NTSC: 720P). ● Compact and lightweight (300g) with excellent mobility for easy transport. ● Simple device configuration with no complicated setup required. ★ ★ If you have any questions or technical issues, please feel free to contact us via email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL: 090-4425-4901 (Kato) 【Features】 ■ Adopts a unique method (uncompressed signal processing + proprietary modulation/demodulation) ■ Transmits complete video and stereo audio with no latency (latency time = less than 1μs) ■ Unidirectional communication method allows for transmission up to 1km with a high-gain antenna ■ Operates in temperatures from -20℃ to +45℃, strong against temperature environments.

• others

Platinum-grade wireless audio and video transmission device. Supports both uncompressed digital video and analog video with no delay. 3-year warranty, demo units available, for more details click here!

* The "Ana-Digi Wireless Device" is a collaboration between an analog NTSC zero-latency video wireless device and a digital zero-latency HD audio wireless device, selecting the best features! ★ If you have any questions or technical issues, feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) "Features" ◆ 100% zero latency + no block distortion + no freezing + no frame skipping + video and audio perfectly synchronized + high quality + suitable for high-speed shooting! ★ You can install an unlimited number of receivers for one transmitter, just like a radio (1:n). 【Specifications】 1. Video input/output for analog uses BNC connectors, and for digital uses HDMI connectors. 2. Representative video formats are 720p (60), 1080p (60), 1280×720 (60), 1920×1080 (60), 4K (30/60). 3. [Demo units available]! 4. Palm-sized and has obtained "Technical Regulations Conformity Certification," no license required! 5. Unlike the 5GHz band, there is no influence from weather radar.

• Other network tools

A clear explanation of "cases of failure in selection" when purchasing wireless devices specialized for video and audio transmission. To avoid the pitfalls of "you get what you pay for," be sure to check this out!

◎ After purchasing a wireless device for video and audio transmission, customers may encounter various troubles. This document provides easy-to-understand explanations for beginners regarding examples, countermeasures, handling methods, and precautions. It is a technical document full of helpful hints for implementation. * The purchase condition for industrial wireless devices is the use of "100% no delay, uncompressed wireless devices." There is no synergy effect when utilizing low-latency wireless devices! ★ If you have any questions or "troubles," please feel free to contact us via email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) 【Content Overview (Excerpt)】 ■ Failures and countermeasures related to drone aerial photography ■ Failures and countermeasures regarding interference after purchasing a wireless device ■ Flickering noise in received video: failures and countermeasures ■ Uncertainty regarding the purchase of wireless devices: countermeasures ◎ Furthermore, our uncompressed wireless devices can be used with image-related equipment, image processing, monitoring systems, and image transmission devices with 100% no delay. ★ For more details, please feel free to contact us.

• Image Transmission Equipment

Selection Methods for Wireless Devices and Video Equipment: An explanation of how to choose cameras, monitors, and antennas for beginners. Important points to consider to avoid regrets!

Our company's uncompressed wireless devices can be utilized with image-related equipment, image processing, surveillance systems, and image transmission devices with 100% no delay. The essential specification for industrial wireless devices is not low-latency transmission; 100% no-latency transmission is the important spec. As a result, the synergy effect is significant! We provide easy-to-understand explanations for beginners on the selection points for cameras, monitors, antennas, wireless devices, and cables, as well as handling methods and precautions. This book is full of tips that will be helpful during implementation. If you have any "troubles" regarding wireless devices, please feel free to contact us via email or phone, and we will send you advice, technical materials, and application case studies!! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) For more details, "Download the PDF materials"! [Contents (excerpt)] ■ Selection criteria for cameras and monitors ■ Selection criteria for antennas and wireless devices ■ Selection criteria for cables ■ Examples of video and audio transmission using uncompressed wireless devices

• Image Transmission Equipment

For those who want to send video and audio via radio waves for the first time: Radio waves are invisible and come with challenges such as delays, anxiety, troubles, and difficulties... We will solve them all! A complete introduction!

* When transmitting video via radio waves, we introduce and clearly explain legal considerations, antenna selection, performance evaluation of transmitters and receivers, handling methods, etc. For details, please refer to the technical document "Technical Introduction to Transmitting Video and Audio via Radio Waves for the First Time." ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL: 090-4425-4901 (Kato) ◎ Our uncompressed wireless devices can be used with image-related equipment, image processing, surveillance systems, and image transmission devices with 100% no delay. [Content Introduction] ★ When sending video and audio via radio waves, we provide thorough and detailed explanations regarding necessary video equipment and handling. ● The author, with 30 years of experience in the wireless industry, explains the know-how gained from working as a researcher, designer, manufacturer, and on-site installer in an easy-to-understand manner for beginners. ● We explain video transmission via wireless in an easy-to-understand way using text and photos. ★ We hope this will be of some help in enhancing your knowledge.

• Wireless LAN

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!