Notice of Brand Name and Packaging Change for Plastic Syringes (New 3)

No risk of detachment of the tip and plunger! Each one can be used safely with individual blister pack packaging. Made by HENKE.

This is an all-plastic disposable syringe manufactured by Henke-Sass, Wolf in Germany. 【Features】 ◆ The barrel (outer tube) is made of polypropylene, and the plunger (piston part) is made of polyethylene. ◇ All-polyethylene integrated molded plunger 　→ There is no risk of detachment between the tip and the plunger. ◇ No rubber or silicone oil used 　→ There is no leaching caused by rubber or silicone oil. ◆ A special ring is applied at the top of the barrel to prevent the plunger from popping out. ◆ Two types available: a lure tip type that is easy to attach and detach, and a lure lock type that can be securely fixed (ISO594). ◆ EOG sterilized ◆ Convenient graduated capacity markings ◆ Each syringe is individually packaged in a blister pack. ◇ Protects the syringe from contamination by dust, dirt, and other undesirable substances in research and experiments. ◇ Syringes do not come into direct contact with each other. 　→ This prevents scratches on the barrel (outer tube) due to friction and wear on the markings, as well as damage to the barrel itself, allowing for safe use of each syringe. 【Medical Device Registration Number: 27B3X00265000001】

• Other physicochemical equipment
• Other laboratory equipment and containers

No risk of detachment of the tip and plunger! No concerns about leaching from rubber! Can be used as a syringe pump or syringe dispenser.

This is an all-plastic disposable syringe manufactured by Henke-Sass, Wolf in Germany. It features an integrated polyethylene plunger instead of a traditional plunger with a rubber tip, eliminating the risk of detachment between the tip and the plunger. There is no concern about the plunger popping out of the barrel, regardless of the back pressure. 【Features】 ◆ The barrel (outer tube) is made of polypropylene, and the plunger (piston part) is made of polyethylene. ◆ The all-polyethylene integrated plunger eliminates the risk of detachment between the tip and the plunger. ◆ A special ring is applied at the top of the barrel to prevent the plunger from popping out. ◆ No rubber or silicone oil is used, so there is no leaching caused by rubber or silicone oil. ◆ Available in two types: lure tip type and lure lock type (ISO594). ◆ Syringes from 2mL to 20mL come with convenient graduated capacity markings. ◆ Bulk pack (unwrapped). If you would like a sample, please feel free to contact us.

• Other physicochemical equipment
• Other laboratory equipment and containers

*Product samples are also available! Ideal for research and development environments! A wide range of high-quality and reasonably priced syringe filters and more are featured.*

We are currently offering a "comprehensive catalog" featuring a wide range of products such as "syringe filters" for use in high-performance liquid chromatography (HPLC) systems. Our lineup includes high-quality "MS syringe filters" with excellent cost performance, "Target syringe filters" that can also be used for filtering chemical samples, and "all-plastic disposable syringes" that eliminate the risk of detachment from the tip due to their integrated plunger design. ★ Product samples are also available! Please feel free to contact us. 【Main Contents】 ■ MS Syringe Filters ■ Target Syringe Filters ■ All-Plastic Disposable Syringes ■ Plastic Disposable Syringes ■ Syringe Caps / Dispensing Nozzles *For more details about the products, please refer to the catalog.

• Glassware and containers
• Other environmental equipment
• Filtration Equipment

Features: ● Equipped with ARM MediaTek Genio 700 / 510 ● Onboard LPDDR4 8GB ● HDMI 2.0 x 1, DP 1.4 x 1 ● eDP 2 lanes x 1, MIPI-DSI 4 lanes x 1 ● GbE x 1 ● USB 3.0 + 2.0 x 1, USB 2.0 x 5 ● UART x 4, GPIO x 12, MIPI CSI x 2, TPM 2.0 ● Fan-equipped heatsink, heatsink available separately ● Carrier board available separately

Features: ● Equipped with Intel Core Ultra 5 125H/7 155H ● LPDDR5 16GB onboard memory ● NVMe 128GB onboard storage ● eDP x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen2 x 2 ● PCIe 4.0[x1] x 4 ● 2.5GbE x 1 ● COMe Type10 standard, size 84mm x 55mm ● Optional items ECB-920A-0001: Development carrier board NANOCOM-MTU-FAN: CPU fan NANOCOM-MTU-HSP: Heat spreader (Note: Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 9 185H / 7 155H / 5 125H processors ● DDR5 5600MHz Dual Channel SODIMM x2 (up to 96GB) (sold separately) ● VGA switch DDI x1, LVDS colay eDP x1, DDI x2 ● USB 2.0 x8, USB 3.2 Gen 2 x4 ● PCIe [x1] x4, PCIe [x4] x1, PEG [x8] + [x4] + [x4] ● 2.5GbE x1 ● DC 9~16V input ● COM Express Type 6, 3.75 inches x 3.75 inches (95mm x 95mm)

By digitizing contract operations, you can reduce many costs, including stamp duty and mailing fees. ◆ Four Benefits of Electronic Contracts - Cost reduction for printing, stamp duty, mailing fees, and original document storage - Improved business efficiency through system-based sending and stamping - Prevention of tampering with timestamps - Enhanced document searchability 【Many Benefits for the Other Party as Well!】 - Both parties can confirm that the document has not been tampered with - No worry about losing the original paper documents - Increased operational efficiency due to the absence of mailing and binding hassles - Quick contract conclusion through email or system verification ◆ Disadvantages of Electronic Contracts - Costs for implementing and operating the service - Need to ensure that business partners understand electronic transactions ----------------------------------------------------- 　　Consult with paperlogic for electronic contract services! -----------------------------------------------------

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.