The deodorizing and disinfecting device for clothing using electronic money starts operation on January 8 (Friday)!

Measures against odors on clothing! We will introduce various facilities that have been implemented.

This is a case study that summarizes the details and implementation results of 'HAL SHOWER' handled by HAL Industry Co., Ltd. It includes photos and diagrams of the building structures and sizes of each installation site. Additionally, we provide detailed testimonials from each person in charge. Please feel free to download and take a look. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

Resolve the complaints about tobacco smell caused by those who use the smoking area bringing it into the elevators and shared spaces!

- Installation Location: 6th Floor Smoking Room Anteroom - Purpose of Installation: Deodorization of clothing for employees of tenant companies after smoking [Voice of the Person in Charge] There are 16 elevators in front of the smoking room, and we have received complaints about the smell of tobacco from non-smokers in the elevators and elevator hall, which has been difficult to address. After conducting a test installation, we received positive feedback from non-smokers that the odor was eliminated, and it also contributes to raising awareness among smokers, leading us to decide on the implementation. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

Does the smell of tobacco on clothes after smoking lead to complaints? New facilities for smokers to smoke without hesitation!

Contributing to Claim Avoidance and Improving Building Quality! To building management companies and building owners: - Are you receiving complaints from nearby residents about smoking refugees? - Are non-smokers complaining about the smell of tobacco? Common case: The unpleasant smell of tobacco from smokers in the elevator. The issue of odor often becomes a "silent complaint" (dissatisfaction that is not directly communicated). 'HAL・SHOWER' is a device that deodorizes and disinfects the tobacco smell that clings to clothing in smoking rooms. It's easy to use; just stand in front of the device and wave your hand over the sensor. Our original disinfectant deodorizer is sprayed all over your body to eliminate the tobacco smell. With this, both smokers and non-smokers can enjoy a comfortable environment. [Demo Installation and Sample Requests Now Accepted!] HAL・SHOWER can be installed for a 'free demo' before introduction. This allows you to actually check the 'usage situation of smokers and the evaluation of non-smokers regarding tobacco smell.' ★ First, please take a look at the materials!

• Air Shower

Thirdhand smoke prevention! Measures against tobacco odor brought into elevators and shared areas by those who used the smoking area!

- Installation Location: In front of the smoking room on the 3rd floor (inside the smoking cabin) - Purpose of Installation: Deodorization of clothing for tenant employees after smoking [Feedback from the Responsible Person] Before the enforcement of the revised Health Promotion Act, we began considering the introduction of HAL SHOWER as a measure against odors on clothing in the smoking room. After a test installation, the evaluation from non-smokers was very positive, and many people used it in line. We also received high praise from the tenants, leading to the decision to implement it. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will exhibit at the "Japan Pavilion" established by the Ministry of the Environment at the 30th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP30), which will be held in Belém, Brazil, from November 10, 2025. "SPACECOOL" is a radiative cooling material that enables zero-energy cooling by dissipating heat into space. At our exhibition booth, we will showcase examples of its use not only in reducing air conditioning energy in buildings but also in heat mitigation measures (adaptation strategies) for tents and parasols. The Japan Pavilion aims to promote excellent technologies, products, and services that support global decarbonization and adaptation to climate change, and to achieve Japan's long-term climate change goal of "net zero by 2050." We believe that our participation plays an important role in this endeavor. Through this exhibition, we aim to accelerate our initiatives with local partners in regions severely affected by heat issues, such as the Middle East, including Saudi Arabia and the United Arab Emirates, as well as Southeast Asia, contributing to global decarbonization and climate change measures.

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from October 1 (Wednesday) to October 3 (Friday), 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies that solve issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wednesday) to October 3 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK