HEISHIN's Virtual product showroom is now open!

With the "Mohno Pump," a rotating positive displacement progressive cavity pump, it is possible to transfer fluids ranging from water-like fluids to high-viscosity fluids and high-concentration slurries with high precision and without pulsation!

Many pumps in the world have limitations. ● They cannot transfer the desired liquid. ● Solids in the liquid get crushed during transfer. ● They have pulsation. ● They are difficult to control. ● They produce a lot of noise. The solution is a high-end performance pump, the Mohno Pump. Why can the Mohno Pump solve various difficulties? It is due to the special structure of the Rotor and Stator. It is classified as a rotary positive displacement single-screw pump, capable of non-pulsating and precise transfer. 【Five Basic Performances of the Mohno Pump】 1. Achieves non-pulsating and precise transfer. 2. Can transfer various liquids without damaging them. 3. Exhibits high suction capability. 4. Capable of both forward and reverse operation. 5. Allows for precise control of discharge volume.

• Positive Displacement Pump

The basic structure is the same as the "Mohno Pump," a progressing cavity pump! It achieves high-precision application even with high-viscosity liquids and high-concentration slurries.

The basic structure of the Mohno Dispenser is a progressing cavity pump of the same rotary volumetric type as the Mohno Pump. This structure allows for the instant discharge of high-viscosity liquids and precise application. The Mohno Dispenser, which achieves improved product quality and reduced cycle time, is active in various industries such as electronics, food, automotive, and cosmetics. [Features] - Instant discharge of high-viscosity liquids up to 1,000,000 mPa·s and high-concentration slurries - Prevents liquid dripping during stops, keeping the workpiece and surroundings clean - Less affected by changes in the state of the liquid, enabling stable application over long periods - Easy setting and adjustment of discharge volume through servo motor control - Achieves quality improvement by accurately applying the necessary amount [Examples of Discharged Liquids] Two-component adhesives, silicone resins, metal pastes, solder pastes, thermal grease, thermal silicone, liquid gaskets, UV-curable adhesives, epoxy resins, conductive adhesives, various slurries, mastic sealers, hemming sealers, steel plate reinforcements, shampoos, lipsticks, emulsions, cold packs, chocolate, whipped cream, seasoning liquids, and more. *For more details, please refer to the PDF catalog or website, or contact us.

• dispenser

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/