"The Theory and Application of Flexible Media Handling Technology" published by the Japan Society of Mechanical Engineers.

A measuring device that is expected to grasp the high-frequency viscoelastic properties (HFVE) closely related to the friction of rubber, such as tires.

The "HFR002" is a high-frequency viscoelastic measurement device capable of measuring viscoelasticity using ultrasound. It is expected to provide insights into high-frequency viscoelastic properties that are closely related to the friction of rubber, such as that found in tires. For materials whose physical properties change due to electric fields and other factors, it is possible to observe the process of change through megahertz viscoelastic measurements under conditions similar to those of the actual device. Not only bulk properties but also surface megahertz viscoelasticity can be measured. 【Features】 ■ Simultaneous optical observation with ultrasonic measurement ■ Specialized for high-frequency range ■ No need for temperature-frequency conversion, thus no need for a low-temperature bath ■ No sample preparation required ■ Results available on-site For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

Measurement of megahertz viscoelasticity at room temperature is possible! A device that can measure the high-frequency viscoelasticity of fluids.

"Liq-F" is a high-frequency viscoelastic measurement device capable of measuring fluid viscoelasticity using ultrasound. It can measure megahertz viscoelasticity at room temperature, which was not possible before, allowing for an understanding of high-frequency viscoelastic properties in the usage conditions of high-performance fluids. It can measure not only bulk properties but also surface megahertz viscoelasticity. 【Features】 ■ Capable of measuring megahertz viscoelasticity at room temperature ■ Capable of measuring surface megahertz viscoelasticity ■ Easy to disassemble and clean For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

Rheometer attachment type! A viscoelastic measurement device capable of measuring viscoelasticity using ultrasound.

The "HFRU" is a high-frequency viscoelastic measurement device that can perform viscoelastic measurements using ultrasound while applying low-frequency vibrations and rotations. It is expected to measure megahertz viscoelasticity under large strains, which was not possible before, allowing for the understanding of nonlinear viscoelastic properties of high-functionality fluids under shear. In addition, it can perform simultaneous measurements with rheometer functions, and it is capable of measuring not only bulk properties but also surface megahertz viscoelasticity if the loss is significant. 【Features】 ■ Easily set up on MCR ■ Measurement at eccentric positions is possible ■ Optical observation can be performed simultaneously with ultrasonic measurement (separately) ■ Rheometer attachment type *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

Parking space management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, enabling efficient parking lot operations. For large parking lots, we recommend the "Floor Management Method" and "Block Management Method," which focus on cost reduction. Sensors are installed at regular intervals to count and manage the number of passing vehicles. This method offers the advantages of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 For smaller facilities, we recommend the "Parking Space Management Method," where sensors are installed in each parking space to display availability with high accuracy. By providing reliable occupancy information, this method helps reduce unnecessary entry of new vehicles and ensures safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8