Reduce costs by reducing sludge! "Load measures" and "sludge volume reduction."

Zero emissions of ozone! It is possible to reduce costs related to sludge, chemicals, and maintenance management labor.

"Oni Taiji" is a sludge reduction device that achieves "zero" excess sludge by using it in conjunction with an aeration system. By significantly reducing excess sludge, it can lower the running costs that have been a major burden until now. We have a demonstration unit available, so you can conduct sludge reduction tests at your location and directly confirm its effectiveness. 【Features】 ■ 75% reduction of excess sludge ■ Zero ozone emissions ■ Near-zero emissions achieved ■ Other cost reductions ■ Decolorization of wastewater *For more details, please refer to the PDF materials or feel free to contact us.

• Water treatment equipment
• Wastewater/wastewater treatment equipment
• Other water treatment equipment

Reducing sludge, minimizing odors, and cutting costs! We solve your wastewater treatment problems.

We will solve the wastewater treatment issues you face in your food factory by introducing an "aeration device." With the implementation of this system, the need for pressurized flotation devices will be eliminated. It is possible to reduce costs related to floss treatment and coagulants. Even wastewater that was previously discarded can be reused with advanced treatment, leading to cost savings and reduced expenses for the factory. We also have demo units available, so please feel free to contact us. 【Features】 ■ Reduces equipment maintenance and management costs ■ Odor control ■ Bulking prevention ■ A device that is nearly maintenance-free, significantly reducing labor *For more details, please refer to the PDF materials or feel free to contact us.

• Water treatment equipment
• Wastewater/wastewater treatment equipment
• Other water treatment equipment

High mixing performance and a structure that is difficult to clog! I confidently recommend it.

- The Shardis mixer has a structure that eliminates intersections, making it difficult to clog, which allows for extreme simplification of daily management. - Due to the streamlining of the mixing process, it can be widely used for applications such as ozone sterilization and wastewater treatment. - It can mix liquids with large viscosity differences, slurries, and both gases and liquids.

• Chemicals

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.