We have released a promotional video for the pH electrode cleaning agent "Seez Mild"!

We clean the electrode and maintain the pH value! Introducing the pH electrode cleaning agent "Seez Mild."

Is the sensitivity of the electrodes in your neutralization device okay? There may be a possibility that it is not neutralizing properly and is flowing due to "taking time for measurement" or "fluctuations in pH value." 'Seez Mild' cleans the electrodes and maintains the pH value. [How to Use] ■ After pouring about 200ml into a beaker or similar container, immerse the pH electrode for 2-3 minutes, then thoroughly rinse the electrode with tap water. * If the electrode is heavily soiled, please wipe off the dirt well with a soft paper or cloth. * For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

We handle industrial chemicals in general, including potassium chloride solutions.

Seize started handling industrial chemicals in July 2010. In addition to inorganic and organic chemicals, we also handle and sell industrial and environmental-related chemicals such as deodorants, desiccants, and insecticides. Our products can be used during maintenance. 【Precautions】 <Potassium Chloride Solution> ■ Please shake the container well before use. ■ After opening, seal it promptly and use it up quickly. ■ Store in a cool, dark place away from direct sunlight (below 25°C). ■ Do not return liquid that has been transferred to another container, even if unused. ■ In case of contact with eyes or skin, rinse immediately with plenty of water. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

We handle a wide range of industrial chemicals, including standard solutions of neutral phosphate salts.

Seize started handling industrial chemicals in July 2010. In addition to inorganic and organic chemicals, we also handle and sell industrial and environmental-related chemicals such as deodorants, deodorizers, and insecticides. Our products can be used during maintenance. 【Precautions】 <Neutral Phosphate Standard Solution> ■ Please shake the container well before use. ■ After opening, seal it promptly and use it up quickly. ■ Store in a cool, dark place away from direct sunlight (below 25°C). ■ Do not return liquid that has been transferred to another container, even if unused. ■ In case of contact with eyes or skin, wash thoroughly with plenty of water immediately. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

We handle industrial chemicals in general, including standard buffer solutions for pH calibration.

Seas started handling industrial chemicals in July 2010. In addition to inorganic and organic chemicals, we also handle and sell industrial and environmental-related chemicals such as deodorants, deodorizers, and insecticides. 【Notes】 <Standard buffer solution for pH calibration> ■ Please clean the container for dissolution thoroughly. ■ Completely dissolve one bag in pure water to make 500 mL. ■ Refer to JIS-Z8802. The accuracy is within ±0.03 pH. ■ Store this product at room temperature and pay attention to moisture prevention. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Last month, we held a spring safety conference hosted by our company. We have compiled the details and atmosphere of the day into a PDF. We would appreciate it if you could take a moment to read it.

In recent years, as the importance of data integrity (DI) compliance in GMP environments has increased, there has been a growing call to deepen understanding of 21 CFR Part 11. This content introduces an on-demand presentation that organizes the background of Part 11, its relationship with DI, and its positioning in CSA guidance, while explaining the basic concepts of electronic records and electronic signatures. ■Content - Background and basic concepts of Part 11 - Relationship with data integrity (DI) - Positioning in CSA guidance - Basic requirements for electronic records/electronic signatures *This content is based on information as of March 17, 2026. *The information provided is intended for general informational purposes and does not guarantee specific compliance or suitability.