Non-contact measurement solution contributing to the realization of flexible lines.

To streamline the quality control of shafts and fastening components, and to eliminate setup time. A free online seminar on non-contact measurement will be held.

Our company offers a non-contact measurement solution that contributes to the realization of a flexible line through "OptoQuick" and "OptoFlash." "OptoQuick" enables precise non-contact scanning using optical sensors. It can measure eccentric workpieces, crankshaft pin bearings, joints, and more with high reliability. Additionally, it can be used very close to machine tools, contributing to faster quality inspections. It boasts excellent operability, allowing for easy setup changes and modifications to measurement programs. The "OptoFlash" for small parts excels in measurement speed due to the absence of vertical movement of the sensor and workpiece, executing 100 static measurements in just 2 seconds. 【We respond to the following needs】 ◎ Considering the introduction or switch to a non-contact measurement solution ◎ Planning to eliminate setup times and mix flows for a variety of products ◎ Wanting to enhance traceability while conducting flexible production ★ We are holding a free online seminar on non-contact measurement solutions. Please refer to the basic information section or materials for seminar details. *Detailed information on each product can be viewed via PDF download.

• Other measurement, recording and measuring instruments

Achieve high-precision non-contact measurement in seconds <Test measurement of workpieces available (please inquire)>

OptoFlash achieves high-precision measurements by acquiring and analyzing optical images. It enables fast and accurate measurements in production environments of small parts where high precision is required, such as in automotive, general manufacturing, aerospace, and medical fields. It is particularly suitable for dimension verification of electric motor shafts, electronic connectors, hydraulic circuit components, screws, and more. <Main Features> 1. Ultra-fast - The 2D optical technology enables a reduction in cycle time. - The cycle time is remarkably fast, executing 100 static measurements in just 2 seconds. 2. High flexibility - Capable of measuring a wide variety of shapes, from bolts to small shafts. - Achieves static and dynamic measurements of outer diameter, length, roundness, cylindricity, coaxiality, taper, grooves, chamfers, R (shape), shaft runout, screw dimensions, etc., in just a few seconds. 3. Ease of use - The measurement screen is user-friendly while equipped with multi-level access features, allowing level settings according to the operator's tasks and permissions. - Open loading without doors enables robot compatibility, allowing for automation without the need for an operator. 4. Durability - The fixed position of the 2D sensor eliminates mechanical stress. Measurement performance remains consistently stable over millions of cycles. - The need for maintenance is also minimized.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Optical Measuring Instruments

Supports on-site productivity with a superior balance of measurement performance, speed, and versatility.

OptoQuick captures and analyzes optical images to measure various workpieces such as cams, cranks, gears, and drive shafts with high precision and in a short time. <Main Features> 1. High Speed and High Precision - Achieves accurate and stable high-precision measurements in seconds using cutting-edge image processing technology. 2. High Flexibility - Capable of measuring various parts with a single unit, allowing for the production of different workpieces in the same manufacturing area. - Excellent operability, with measurement results that are easy to understand, enabling efficient and rapid work. 3. Multi-Sensor - In addition to optical sensors, it supports measurements of various shapes such as holes, shaft runout, cams, and half-strokes using three types of contact sensors. - Combining contact and non-contact technologies creates significant synergies. 4. Improved Workability - By installing it right next to the manufacturing machine, it reduces unnecessary time spent on moving and verifying parts. - Easily accommodates new parts by simply adding configuration files.

• Other measurement, recording and measuring instruments

Takaya Corporation will exhibit at the "40th Nepcon Japan - Electronics Development and Implementation Exhibition" to be held at Tokyo Big Sight from January 21 (Wednesday) to January 23 (Friday), 2026. <Industrial Equipment Division> [New Model] Flying Probe Tester <APT-T400J Series> [High-End Model] Flying Probe Tester <APT-2600FD Series> * The new model "APT-T400J" will be unveiled for the first time in Japan. <RF Division / Solutions Division> Visualizing worker performance and location with RFID No inventory required! Real-time constant monitoring <EMS Division> - An implementation line that integrates systems and automation technology to achieve high-quality, low-cost manufacturing through labor-saving measures. When entering this exhibition, please proceed to the URL below and register for a "Visitor Badge." https://www.takaya.co.jp/fa/news/event/nepcon2026/ We sincerely look forward to your visit. Product demonstrations will also be conducted at our exhibition booth, so please feel free to stop by.

Did you know that the success or failure of an ERP upgrade project is actually determined by the integration plan with surrounding systems? Many companies are facing unexpected troubles as a result of relying solely on ERP vendors. In this seminar, an SE who has been involved in numerous ERP upgrade projects will provide a detailed explanation of practical integration plans that lead to successful ERP upgrades. This content is a must-see for information systems personnel preparing for an ERP upgrade. You will take home specific know-how that can significantly reduce project risks through advance measures. <Recommended for> - Those who are preparing for an ERP upgrade in 1 to 3 years and are gathering information on what to prepare. - Those who want to understand the project risks of ERP upgrades in advance. - Those who are considering how to efficiently succeed in an ERP upgrade within budget and schedule constraints. Target audience: Information systems managers and personnel.

Fujiclean Co., Ltd. will be exhibiting at "FOODEX JAPAN 2026," held at Tokyo Big Sight. This is the largest B to B trade show in Asia related to food and beverages, held every March at Tokyo Big Sight. With our extensive experience in wastewater treatment for various food manufacturing processes, we will contribute to solving on-site challenges. We will also display a miniature model of our FRP wastewater treatment equipment, and we look forward to your visit.

Fujiclean Co., Ltd. will be exhibiting at the "36th Western Japan Food Industry Creation Exhibition '26" held at Marine Messe Fukuoka. This is a comprehensive industrial exhibition that disseminates the latest information related to food. It aims to create the future of the food industry from Kyushu to the entire country, providing a platform for the latest technologies and new customer encounters. Our company will contribute to solving on-site issues based on our extensive experience in food manufacturing wastewater treatment. We will also be displaying a miniature model of our FRP wastewater treatment equipment, and we look forward to your visit.

Kanadebia Corporation will be exhibiting at the "40th Nepcon Japan" held at Tokyo Big Sight. This exhibition will showcase the world's most advanced electronic components, materials, and manufacturing, assembly, and inspection equipment that support the multifunctionality and high performance of electronic devices. [Our Exhibition Content] (1) Various board computer products FSoE, battery control boards, EMS, etc. (2) Carbon Nanotubes/CNT CNT heaters Please come and see the "electronic devices" offered by Kanadebia. We sincerely look forward to your visit.