★TAIYO★ 2021 TAIYO Cylinder Product Guide

High-power electric cylinders provide excellent solutions with superior positioning accuracy and low noise compared to pneumatic/hydraulic cylinders!

The "Electric Cylinder ETH Series" can be used for high thrust applications such as press-fitting and pressing, as well as for high-speed testing applications. Please consult us about electricization projects that have been difficult until now. We will listen to your usage conditions and select the cylinder, reducer, and servo motor. We can also combine it with servo motors from manufacturers you are familiar with. 【Features】 ■ High thrust up to 114,000 N ■ High speed up to 1.7 m/s ■ Maximum stroke of 2000 mm ■ Space-saving, compatible with motor folding usage ■ Speed control and multi-point stop are also achievable! ■ Reduction of system design process time can also be achieved *For more details, please download the PDF document or feel free to contact us.

• Actuator
• cylinder

A dedicated servo controller featuring a high-speed CPU has been introduced, enabling advanced load control, speed control, and positioning control with simple operation in a hydraulic servo system.

We have completed the advanced energy-saving intelligent hydraulic control unit "Atsukan Servo/PQCS2 Series," which combines a direct drive hydraulic servo with excellent economic efficiency and a cylinder equipped with load and length measurement sensors, in an environment without control valves and piping. The data from the built-in position sensor and load sensor in the cylinder enables arbitrary load and positioning control. (The cylinder with load sensor has been patented in the United States, Japan, and eight European countries.) Positioning accuracy: ±0.02mm Load accuracy: ±3% High thrust with continuous holding capability.

• Actuator
• cylinder
• Servo

This is the 70/140H-8 series of general-purpose hydraulic cylinders, the most widely used in the industry.

General-purpose hydraulic cylinder with an inner diameter, support brackets, and accessories, featuring a wide range of related parts and equipped with a high-performance cushion as standard, designed for 7/14 MPa specifications.

• Actuator
• cylinder
• Hydraulic Equipment

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!