Notice of Renewal for the Permanent Magnet and Magnet Products Page【DSC】

Are you having trouble selecting magnets? We propose high-quality, low-cost magnets with strong magnetic force!

Are you having trouble selecting permanent magnets? We have created an "Introduction to Permanent Magnets" document organized by field and application. Example: "Neodymium magnets" are representative rare earth magnets and are among the strongest magnetic materials available for practical use. While they have excellent mechanical strength, they are prone to rust, so we perform surface treatments such as plating to prevent this. We offer custom solutions for low-cost, high-quality magnetic products to meet various application requirements. 【Product Lineup】 ■ N/M/H Series ■ SH/UH/EH/AH Series (High Retention Force) We also have a wide range of other magnets (Samarium Cobalt magnets, Ferrite magnets, Neodymium Bonded magnets, Alnico magnets) available. *For more details, please refer to the PDF document or feel free to contact us.

• electromagnet
• magnet

We propose high-quality, low-cost magnets with strong magnetic force!

"Neodymium magnets" are representative rare earth magnets and are among the strongest magnetic materials in practical use. While they excel in mechanical strength, they are prone to rust, so surface treatments such as plating are performed to prevent this. We offer custom solutions for low-cost, high-quality Chinese products to meet various application requirements. 【Product Lineup】 ■ N/M/H Series ■ SH/UH/EH/AH Series (High Retention Force) *For more details, please refer to the PDF document or feel free to contact us.

• electromagnet
• magnet

The magnetic force is lower compared to Samakoba magnets, but they are less prone to rust and inexpensive.

"Ferrite magnets" are magnets made by sintering iron oxide as the main raw material. Compared to rare earth magnets, they have lower magnetic strength, but they are widely used due to their low cost and resistance to rust. Our company offers custom solutions for low-cost, high-quality products made in China to meet various application requirements. *For more details, please refer to the PDF document or feel free to contact us.*

• electromagnet
• magnet

It is resistant to rust and has excellent temperature characteristics.

"Samarium-cobalt magnets" are rare earth magnets that possess a high magnetic strength, second only to neodymium magnets. They are resistant to rust, so surface treatments such as plating are usually unnecessary, and they have a low temperature coefficient, exhibiting excellent temperature characteristics. Our company offers custom solutions for low-cost, high-quality products made in China to meet various application requirements. *For more details, please refer to the PDF document or feel free to contact us.*

• electromagnet
• magnet

Due to compression molding, there is a high degree of freedom in shape, and high dimensional accuracy can be achieved even with thin-walled shapes.

"Neo-Jibond magnets" are magnetic materials made by mixing neodymium magnet powder with plastic resin and compressing it into shape. The magnetic strength is positioned between rare earth magnets and ferrite magnets. Due to its isotropy, there are no restrictions on the direction of magnetization, allowing for multi-pole magnetization in any direction. Our company offers custom solutions for various application requirements with low-cost, high-quality products made in China. 【Features】 - Neodymium magnet powder mixed with plastic resin and compressed into shape - Isotropic with no restrictions on the direction of magnetization - Multi-pole magnetization possible in any direction - Custom solutions with low-cost, high-quality products made in China *For more details, please refer to the PDF document or feel free to contact us.

• electromagnet
• magnet

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!