Non-ferrous metal sorting test line established!

The manual sorting has been replaced by automatic sorting using machines, which offers benefits such as the possibility of reducing labor costs!

The "Aluminum Separator" is a machine that recovers non-ferrous metals such as "aluminum," "copper," and "brass" from crushed processed materials. By rapidly rotating a magnetic rotor with permanent magnets arranged around its circumference, a powerful alternating magnetic field is generated on the drum surface. This induces eddy currents in non-ferrous metals like aluminum present in the processed materials being conveyed, allowing for separation through the resulting propulsion force. 【Features】 ■ Capable of recovering valuable materials such as aluminum, copper, and brass from mixed processed materials ■ Reduction of disposal costs ■ Can be sold as mixed metals ■ Transition from manual sorting to automated sorting using machinery, reducing labor costs ■ Aimed at the removal of non-ferrous metals (aluminum, copper, brass) *For more details, please refer to the PDF document or feel free to contact us!

• Automatic sorting machine

Detect the color of the processed material and sort it using air blow!

◆Features of the Color Sorter◆ 〇Detection of processed materials using CCD cameras from two directions (top and bottom). →High-precision sorting is possible as the materials can be identified from both the front and back using cameras. 〇Two-stage system →The sorting unit is divided into two stages (upper and lower), allowing for coarse sorting followed by fine sorting in one pass. Additionally, settings can be adjusted for the upper and lower stages, enabling configurations tailored to specific purposes such as sorting into three categories.

• Other conveying machines

Features ● PICO-ITX standard ● Equipped with Intel Core Ultra 7 255U / Ultra 5 225U ● 16/32GB onboard memory ● 2.5GbE + 1GbE ● HDMI 1.4 + eDP 1.4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA) ● M.2 2230 E-Key x 1 (PCIe 4.0 [x1] + USB 2.0) ● USB 3.2 Gen 2 x 2 + USB 2.0 x 2 ● RS-232/422/485 x 2 ● TPM, GPIO 4-bit, SATA 6Gb/s x 1 ● SMBus/I2C (Default: SMBus) ● Intel AMT Support * This model does not include storage or OS.

Features: ● PICO-ITX standard ● Equipped with Intel Atom x7433RE/x7835RE ● DDR5 4800MHz×1 (up to 16GB) (sold separately) ● HDMI 1.4×1, eDP 1.4b/LVDS×1 ● 2.5GbE×1, GbE×1 ● Full-Size mSATA, M.2 2230 E-key x1 ● USB 3.2 Gen2[x1]×2, USB 2.0×4 ● RS-232/422/485×2, RS-232×2 ● TPM 2.0, SATA 6.0Gbps×1, GPIO 4-bit, SMBUS/I2C×1 * This is a model without an operating system.

Features: ● Equipped with Intel Processor N150 / Intel Core 3 Processor N355 ● DDR5 4800MHz SODIMM ×1 (supports up to 16GB) (sold separately) ● HDMI 1.4 ×1, eDP 1.4b / LVDS ×1 ● Intel Ethernet Controller I226 (2.5GbE RJ-45 ×1), Realtek RTL8111H (1GbE RJ-45 ×1) ● Full-size mSATA / mPCIe ×1, M.2 2230 E-Key ×1 ● USB 3.2 Gen2[x1] ×2, USB 2.0 ×4 ● RS-232/422/485 ×2, RS-232 ×2 ● TPM 2.0, SATA 6Gb/s ×1, 4-bit GPIO, SMBus / I2C ×1 ● Fan-equipped heat sink available separately PICO-ASL4-FAN01: Heat sink with fan PICO-ASL4-HSK01: Heat sink PICO-ASL4-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure) * This is a model without an operating system.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.