The pH neutralization treatment device consumables order site has opened!

The Series 8014 pH electrodes from Sees are all lead-free. A wide range of products is available.

This is an introduction to the lead-free pH electrodes handled by Sees Corporation. 【Features】 ■ Available cable lengths: 5m / 10m / 15m ■ A wide range of products (standard lead wire 5m) - 8014 - 8014 Hi (for high temperatures) - 8014 pt (for ORP) - 8014 Sb (for antimony) - 110 KP (with temperature compensation) Each type of electrode lead wire can be extended by 5m (up to a maximum of 30m). *For other functions and details, please contact us.

• Other FA equipment

We clean the electrode and maintain the pH value! Introducing the pH electrode cleaning agent "Seez Mild."

Is the sensitivity of the electrodes in your neutralization device okay? There may be a possibility that it is not neutralizing properly and is flowing due to "taking time for measurement" or "fluctuations in pH value." 'Seez Mild' cleans the electrodes and maintains the pH value. [How to Use] ■ After pouring about 200ml into a beaker or similar container, immerse the pH electrode for 2-3 minutes, then thoroughly rinse the electrode with tap water. * If the electrode is heavily soiled, please wipe off the dirt well with a soft paper or cloth. * For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

We handle industrial chemicals in general, including potassium chloride solutions.

Seize started handling industrial chemicals in July 2010. In addition to inorganic and organic chemicals, we also handle and sell industrial and environmental-related chemicals such as deodorants, desiccants, and insecticides. Our products can be used during maintenance. 【Precautions】 <Potassium Chloride Solution> ■ Please shake the container well before use. ■ After opening, seal it promptly and use it up quickly. ■ Store in a cool, dark place away from direct sunlight (below 25°C). ■ Do not return liquid that has been transferred to another container, even if unused. ■ In case of contact with eyes or skin, rinse immediately with plenty of water. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

We handle a wide range of industrial chemicals, including standard solutions of neutral phosphate salts.

Seize started handling industrial chemicals in July 2010. In addition to inorganic and organic chemicals, we also handle and sell industrial and environmental-related chemicals such as deodorants, deodorizers, and insecticides. Our products can be used during maintenance. 【Precautions】 <Neutral Phosphate Standard Solution> ■ Please shake the container well before use. ■ After opening, seal it promptly and use it up quickly. ■ Store in a cool, dark place away from direct sunlight (below 25°C). ■ Do not return liquid that has been transferred to another container, even if unused. ■ In case of contact with eyes or skin, wash thoroughly with plenty of water immediately. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

We handle industrial chemicals in general, including standard buffer solutions for pH calibration.

Seas started handling industrial chemicals in July 2010. In addition to inorganic and organic chemicals, we also handle and sell industrial and environmental-related chemicals such as deodorants, deodorizers, and insecticides. 【Notes】 <Standard buffer solution for pH calibration> ■ Please clean the container for dissolution thoroughly. ■ Completely dissolve one bag in pure water to make 500 mL. ■ Refer to JIS-Z8802. The accuracy is within ±0.03 pH. ■ Store this product at room temperature and pay attention to moisture prevention. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

We handle industrial chemicals in general, including standard buffer solutions for pH calibration.

Since July 2010, Seize has started handling a wide range of industrial chemicals. In addition to inorganic and organic chemicals, we also handle and sell industrial and environmental-related chemicals such as deodorants, desiccants, and insecticides. 【Notes】 <Standard Buffer for pH Calibration> ■ Please clean the container used for dissolution thoroughly. ■ Completely dissolve one bag in pure water to make 500 mL. ■ Refer to JIS-Z8802. The accuracy is within ±0.03 pH. ■ Store this product at room temperature and pay attention to moisture prevention. *For more details, please refer to the PDF materials or feel free to contact us.

• Chemicals

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.