Auto Positioner Specification Comparison Table

Easy operation. An automatic length-setting device that can be attached to all cutting machines. It is compatible with the "Small and Medium Enterprise Management Enhancement Tax System."

The "iMC1000 series" is an automatic length-setting device for cutting machines. **Three reasons to recommend the iMC1000 series:** 1. Achieves faster setup with a stopper movement speed of 30m/min. 2. Maintains high speed and high precision over a long period with a servo motor and magnetic scale measurement. 3. Features a large color touch panel input that is easier to read. Operation is simple: just input the cutting dimensions and touch the "Start" key. The length-setting stopper will then move to the set position. - QR code input is also supported (optional). - The installation direction can be customized for either left or right. - This model qualifies for the "Small and Medium Enterprise Management Enhancement Tax System." The Small and Medium Enterprise Management Enhancement Tax System allows for immediate depreciation or a tax credit of 10% of the acquisition cost for eligible equipment (7% for corporations with capital between 30 million and 100 million yen).

• Other machine tools
• Plastic processing machines (cutting and rolling)
• Other processing machines

An automatic length-setting device that achieves high rigidity and high precision. It can also be installed on cutting machines from other manufacturers!

The "APK1000 model" is an automatic length measuring device that performs high-precision positioning with an accuracy of 0.1 m/m and is easy to operate. The length stop automatically travels to the set value and clamps, significantly improving work efficiency. 【Three Features】 1. Rigid frame type that accommodates heavy materials 2. High precision maintained over a long period with magnetic scale measurement 3. Easy touch panel input for anyone Operation is as simple as entering the cutting dimension and touching the "start" key. After that, the length stop moves to the set position. ■ QR code input is also available (optional).

• Press Dies
• Drill press
• Plastic processing machines (cutting and rolling)

Compatible with all cutting machines. A low-cost, high-precision automatic length-setting device.

The "APKS1000 model" is an automatic length-setting device that achieves high precision positioning of 0.1 mm at a low price. The length-setting stopper automatically travels to the set value and clamps, significantly improving work efficiency. 【Three Features】 1. Simple frame type achieves low cost 2. High precision maintained for a long time with magnetic scale measurement 3. Easy touch panel input for anyone Operation is as simple as entering the cutting dimension and touching the "Start" key. After that, the length-setting stopper moves to the set position. ■ QR code input is also supported (optional).

• Drill press
• Plastic processing machines (cutting and rolling)
• Forging Machine

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "24 Tissue Tubes 3.0ml Type" features a wide inner diameter of 13.4mm at the mouth, a low height of 25.9mm, and a flat bottom design, making it easy to insert and remove samples. Each tube is equipped with a 2D code on the bottom, allowing for efficient sample information management by using a 2D scanner to reflect the code in a PC database. Additionally, it is compatible with automated systems due to its SBS format. 【Features】 ■ Easy insertion and removal of samples ■ Particularly suitable for tissue/cell samples measuring 5mm to 7mm ■ Using our dedicated rack for 24 tubes allows for bulk reading of the 2D codes on the tube bottoms ■ Compatible with automated systems due to its SBS format ■ Made of polypropylene, autoclavable, and compatible with DMSO *For more details, please refer to the related links or feel free to contact us.

■Disadvantages of Conventional Antistatic Fluororesin Coatings - Requires high-temperature firing (around 400°C) - Applicable only to metals - Limited color options - Low mechanical strength ■Features of Safron LF+ - Can be processed at low temperatures (below 100°C) - Applicable to metals and resins - Color variations available - High friction coefficient and mechanical strength - Antistatic performance is equivalent to conventional Safron For more details, please check the product site.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.