Webinar (7/7): Pressure Measurement Useful for Inline Quality Control of Spot Welding

Highly sensitive and acceleration-compensated, suitable for process monitoring of rapidly moving machinery!

This strain sensor can measure dynamic and quasi-static forces generated by fixed or moving machinery. It is highly sensitive and features acceleration compensation, making it suitable for process monitoring of rapidly moving machinery (e.g., press machines, automatic assembly machines). －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・Extremely high sensitivity ・Very low acceleration sensitivity, ideal for measurements on moving parts ・Compatible with tension and compression force measurements ・Excellent overload capacity ・Protection rating IP65 (when using dedicated cables)

• Other processing machines
• Other measurement, recording and measuring instruments

Installed on the movable or non-movable parts of the processing machine, it is ideal for dynamic and quasi-static force measurement!

This strain sensor is robust and can be installed on either the movable or non-movable parts of a machine, making it ideal for measuring dynamic and quasi-static forces. To measure force, the sensor is installed on the surface of the machine or its components, measuring the strain that is proportional to the force applied at that location. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Wide measurement range for both compressive and tensile forces • High sensitivity, capable of measuring small strains • Resistant to breakage under overload • Robust and ideal for industrial applications (IP67) • Easy installation with just one screw

• Other measurement, recording and measuring instruments

Installed on the movable or non-movable parts of the processing machine, it is ideal for dynamic and quasi-static force measurements!

This charge amplifier built-in strain sensor is robust and ideal for installation on the movable or non-movable parts of processing machines, suitable for measuring dynamic and quasi-static forces. To measure force, the sensor is installed on the surface of the processing machine or its components, measuring the strain proportional to the force applied at that location. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Parameter settings can be easily configured using the included PC software, ManuWare. • Two independent measurement ranges (±20 με to ±800 με) can be set, and switching is possible even during measurement. • Full-scale voltage output (±1 to 10 V), offset voltage (±9 V), and signal polarity can be configured. • The voltage output of the built-in charge amplifier is low-resistance output. • Easy installation and optimal protection rating of IP67 for industrial use.

• Other measurement, recording and measuring instruments

Find hints for IoT implementation! With Kistler's extensive experience, we assist in maintaining high competitiveness through the optimization of products and manufacturing processes!

This document introduces numerous case studies that provide hints for IoT implementation. Starting with "Automotive parts manufacturer detects anomalies during press-fitting to achieve quality improvement!" it also includes "Easily realize measurement of screw axial force during fastening!" and "Measure electrode pressing force during spot welding without being affected by noise!" among others. Please make use of this information when implementing IoT. 【Contents (excerpt)】 ■ Automotive parts manufacturer detects anomalies during press-fitting to achieve quality improvement! ■ Easily realize measurement of screw axial force during fastening! ■ Measure electrode pressing force during spot welding without being affected by noise! ■ Establishment of a clinching quality monitoring system for smart factories ■ Connector mating monitoring system for smart factories utilizing IoT *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• Process Control System
• Other information systems

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.