Product introduction YouTube video in Japanese

Corresponding to a high standard of sanitary measures.

KUB Clean has set a new standard in the field of sanitary rupture disks. KUB Clean completely eliminates leaks and boasts excellent durability, resulting in a product that is impeccable for sanitary use. The most outstanding feature: KUB Clean can be easily installed on existing Tri-Clamp flange systems, meeting all requirements for sanitary design and is ideal for CIP and SIP. The surface of the sealing membrane is smooth, and it can be directly attached to the Tri-Clamp flange system with the seal integrated, eliminating any grooves, recesses, or notches that could trap dirt or production residues during production or cleaning cycles. Therefore, KUB Clean is ideal for aseptic and sanitary applications.

• Other machine elements

High airtightness and a design that is difficult to leak! A suitable inverted rupture disk for isolating safety valves.

The "KUB V-type" protects safety valves from corrosive or sticky process media by installing a rupture disk before the inlet of the safety valve. It has been certified for durability against back pressure of up to 135% of the specified burst pressure (*), and it allows for safety valve testing on-site without the need for removal for maintenance. During normal operation, the safety valve is isolated from the process media, allowing for the use of safety valves made from inexpensive materials. 【Features】 ■ Extended lifespan of safety valves and longer intervals between after-service ■ Reduced maintenance inspection costs for safety valves ■ Use of safety valves made from inexpensive materials is possible ■ High airtightness and a design that minimizes leakage * This varies depending on each application. * For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

Reusable rupture disk. [Exhibiting at INCHEM TOKYO 2025]

The KUB type is a long-lasting rupture disk. The KUB type is a special rupture disk that is extremely robust and high-performance, with the burst pressure defined by the Euler formula's buckling load calculation method. Unlike rupture disks manufactured by weakening part of the material, it is a product of REMBE's unique high technology that incorporates a buckling pin for precise full bore opening. Additionally, it features a smooth surface without weakened areas in the disk material, making it very robust and eliminating the risk of damage from misoperation, incorrect installation, or drops (from a height of about 1 meter). With a two-layer structure consisting of a seal membrane layer and a burst layer, the surface of the seal membrane layer that comes into contact with the process medium is smooth and free of scratches. It uses a highly sealable diaphragm, minimizing the risk of damage due to corrosion. The KUB type, with a maximum operating pressure ratio of 98%*, is designed to be strong against metal fatigue not only for high-pressure applications but also under harsh process conditions for gas, steam, liquid, and two-phase flow applications. Its unique manufacturing method allows it to be used even for liquid-only applications, greatly diversifying installation locations and simplifying installation, maintenance inspections, and procurement processes. *Varies by application.

• Piping Materials
• Pneumatic Equipment

Protecting low-pressure design tanks in the pharmaceutical, food, and chemical industries from excessive pressure and vacuum. Capable of handling an extremely low pressure range, with a standard operating pressure ratio of 95% of the minimum burst pressure!

The ELEVENT pressure and vacuum relief valve protects low-pressure designed tanks and containers from excessive pressure and vacuum, while maintaining the pressure inside the tank or container at a constant level. ELEVENT not only prevents the leakage of gases and other contaminants but also eliminates the potential danger of air intrusion into the equipment while suppressing the generation of substances that could lead to explosions. The standard operating pressure ratio is 95% of the minimum burst pressure. ELEVENT is used in the oil and gas industry, food processing, chemical and pharmaceutical fields, and power plant technology. The optimized "air cushion" airtight principle enables smooth valve strokes and the highest level of airtightness, preventing wear and valve chattering. The metal housing is made of deep-drawn stainless steel. ▶ Benefits of Use ▸ Capable of handling extremely low pressure ranges (±2 mbarg) with a compact size for overpressure and vacuum protection ▸ High reliability of airtightness ▸ Pressure setting changes can be made later ▸ Excellent corrosion resistance with E-CTFE and PFA coatings, making it suitable for corrosive atmosphere applications *For more details, please download the materials or feel free to contact us.

• Other machine elements

We would like to introduce the '96 WJacket Tubes 0.5ml Type' handled by FCR and Bio Co., Ltd. This product is a tube with a 2D code that is autoclavable and compatible with DMSO and liquid nitrogen vapor. We also offer a TPE integrated screw cap (Internal type) available in six colors, so please feel free to contact us if you have any requests. 【Features】 ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Compatible with liquid nitrogen vapor ■ Capacity: 0.5ml *For more details, please download the PDF or feel free to contact us.

The low-voltage fuse "SBFC-ET" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrents. It is particularly effective for devices in automobiles where the current temporarily increases significantly. It is suitable for fuel pumps, washer pumps, and similar applications. This low-voltage fuse is recommended for those facing circuit protection challenges in the automotive industry, construction machinery industry, and for low-voltage fuses (below DC70V).

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.