Published in the Nikkan Kogyo Shimbun "Seize the Opportunity! Good Companies in the Region."

If you need machining of various types of resin.

We can handle a wide variety of small lot production primarily focused on cutting processing of FRP at our in-house factory. Please feel free to consult us for various assembly and bonding needs.

• plastic

This is an insulating board made from Kyocera Chemical's BMC premix material, which has been heated and compression molded.

It is primarily composed of unsaturated polyester resin. We have a track record of insulating parts for distribution boards, vehicle components, heavy electrical equipment, and more, including parts for railway vehicles and insulation components related to plant construction. The heat resistance is typically 150°C. Compared to polyester glass mat laminated boards, its strength is inferior. However, it excels in electrical properties and heat resistance. It also has excellent machinability, making it suitable for various structural materials. There are several grades available, each with its own characteristics. We keep the general grade TC-F1 in stock. We also have grades that are resistant to salt, chemicals, acids, and sulfuric acid. All grades can be handled.

• plastic

We accommodate a variety of products, small lots, and short delivery times.

We offer a wide range of resin materials for various molded products, regardless of whether they are thermosetting or thermoplastic. We can also accommodate plastic resin processing.

• plastic

Mass production processing is also possible overseas.

Press processing mainly using FRP and Nomex. Mass production can also be handled at our factory in Malaysia.

• plastic

It has excellent electrical properties, mechanical strength, heat resistance, and moisture resistance, making it an FRP that performs well in areas subjected to high mechanical strength and high pressure.

One of the main materials handled by our factory is a laminated board based on glass cloth. Since it uses glass cloth as the base material, it has greater strength than glass mat laminated boards. The heat resistance class is F, and we also handle higher grades with enhanced mechanical strength. Press cutting processing is possible for thicknesses below 3mm. It excels in electrical insulation, mechanical properties, and heat resistance, and has also passed the combustion test for railway vehicle materials (abbreviated as: vehicle material combustion test). We also handle higher grades such as FR-4 and G-11. NEMA standard: equivalent to G-10 / JIS standard: equivalent to EL-GEM.

• plastic

A long-selling insulating material that is inexpensive and easy to machine.

It is a laminate made of paper substrate and cured with phenolic resin. It is a highly versatile and inexpensive insulator that is easy to machine. We have extensive experience in power distribution and vehicle applications. It is widely used in distribution boards, transformers, and vehicle insulators. Discoloration may occur over time, but there are no issues with quality. PL-PEV is a high-voltage grade that is a superior version of PL-PEM. Its applications are largely similar to those of PL-PEM, but it is often used when electrical properties are required. Its strength is inferior compared to glass laminates. JIS standards: PL-PEM, PL-PEV *We also handle paper-based phenolic resin laminates that comply with the combustion test for railway vehicle materials (railway material combustion test).

• plastic

FRP reinforced with glass fibers. Numerous achievements in electrical insulation components for heavy electrical equipment, vehicles, and facilities, with thin plates used as shielding plates for circuit breakers and switches!

One of the main materials handled at our factory is an electric insulation laminated board made by impregnating, laminating, and molding a glass mat substrate with a specially formulated polyester resin. It features strength, heat resistance, and does not discolor. We have numerous cases of switching from phenolic materials. It also has good machinability, and mass production processing with press cutting is possible for thicknesses below 3mm. This material is used for electrical insulation components in heavy electrical equipment, railways, semiconductors, and electrical installations. Thin sheets have a proven track record as shielding plates for circuit breakers and switches. We offer three colors: red, white, and gray. It excels in insulation, arc resistance, and tracking resistance, and has obtained UL standard 94-V0 for heat resistance. The heat resistance class is Type B. We also have higher-grade options with enhanced flame retardancy. NEMA standard: equivalent to GPO-2 / JIS standard: equivalent to TL-GEM For more details, please refer to "PDF Download" or feel free to contact us.

• plastic

We will undertake mass production processing of FPR at our Malaysia factory.

This is our Malaysia factory where Japanese people reside. Please feel free to consult us when considering mass production processing of FRP. We also accept shipments within Malaysia, to Japan, and throughout Southeast Asia. We obtained ISO 9001 certification in 2017.

• plastic

We accept inquiries regarding wiring assemblies for residential equipment switches and outlets, charging plugs for battery forklifts, and more.

The combination of materials creates new possibilities in insulation technology, contributing to our daily lives as residential-related equipment. The ASSY division is one of the areas that is expected to see increasing anticipation in the future.

• Wiring materials

The low-voltage fuse "SBFC-MS2" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrents. It is particularly effective for devices in automobiles where the current temporarily spikes. For example, it protects power window motors, which may blow regular fuses due to the large current that flows temporarily during startup. It is recommended for those facing circuit protection challenges in the automotive and construction machinery industries, as well as for low-voltage fuses (below DC70V).

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.