Simple Type Water Stop Board Flood Guard F FZ80

The 'red flood barrier' is what can protect you from heavy rain and flooding damage.

"Flood Guard F" is a simple type of water barrier designed to prevent flooding caused by typhoons and sudden heavy rains. Made of lightweight, high-strength ABS, it can be installed quickly and is effective in emergencies. When not in use, it can be stacked for space-saving storage. 【Features】 ■ Two types: Maximum water stop height of 50cm for the "F50 series" and 80cm for the "F80 series" ■ Curved types "FN50/80・FW50/80" can be installed on curves ■ "FT50/80" can be adjusted to the best size from end to end of the installation area ■ "Double water stop" prevents leaks from the early stages of flooding ■ "Fitting bar" fills the gap between the wall and the water barrier, patented!! ■ "Catch clip" reduces leaks and makes it easy to connect multiple units *Catalogs and case studies are available for download via "PDF Download." Please feel free to contact us for inquiries.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. You can use a combination of four different shapes.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from increasingly frequent typhoons and sudden heavy rains. By installing sponge and water stop rubber, it significantly reduces leakage. ■FZ50 Weight (kg): 4.4 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Can create a 30-degree angle on the inside with one unit.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage caused by the increasing trend of typhoons and guerrilla rainstorms in recent years. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FN50 Weight (kg): 3.7 Maximum waterproof height (cm): 51 Maximum durability water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Can be set at a 30-degree angle outward with one unit.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trend of typhoons and sudden heavy rains in recent years. By installing a sponge and water stop rubber, it significantly reduces water leakage. ■FW50 Weight (kg): 3.1 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. By overlapping the protruding parts of the two connected units, they can be easily connected straight.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage caused by the increasing trend of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. For curved sections, FN (inner curved board) and FW (outer curved board) are used, while for straight gaps, FJ/FJL (gap boards) are utilized, ensuring effective leakage prevention even in complex site shapes, contributing to flood control measures. *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. By closely attaching the water stop board to the wall, damage in areas prone to leaks is reduced.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. ■FG50 R/L Weight (kg): 4.1 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 ■FGL50 R/L Weight (kg): 4.5 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Used for fine adjustments of the installation width.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing a sponge and water stop rubber, it significantly reduces leakage. Thanks to its slide structure, the external width can be adjusted within the range of 560 to 705 mm. ■FT50 Weight (kg): 6.6 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Integrated with the main water stop board, dramatically reducing water leakage damage.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing a sponge and water stop rubber, it significantly reduces water leakage. The side seal is a product used in combination with "Flood Guard F" to further reduce water leakage. ■ FS50 Side Seal Weight (kg): 1.5 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

By using the "fitting bar," you can reduce water leakage!

We would like to introduce our "Fitting Bar" that we handle. The water stop board uses the walls at both ends to prevent water intrusion. However, the ground and walls are often not at right angles, which can create gaps between the water stop board and the walls. Additionally, the water pressure on the wall side of the water stop board is lower compared to the bottom, which can prevent the water stop rubber and packing from being compressed efficiently, leading to water leaks. Therefore, the Flood Guard F uses the "Fitting Bar." Its water stop capability has been significantly improved compared to conventional products. 【Features】 ■ When using FG that utilizes the side walls for water stopping, there are no gaps. ■ When using FS that utilizes the back wall for water stopping, there are no gaps, enhancing the water stop effect. ■ By aligning FG, it is also possible to accommodate "steps." ■ The water stop capability has been significantly improved compared to conventional products. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.