-Notice: URL Change- FOOMA JAPAN 2021 After Exhibition (WEB Exhibition) Information

For those struggling with the dissolution and dispersion of powders! We propose a powder dissolution device that uses CombiMix® to uniformly mix powders and liquids into a slurry.

【Vacuum-type Powder Dissolution System】 This system creates a vacuum state inside the CombiMix® tank and draws in powder through the bottom valve. It dissolves and disperses powders such as silica, resin powder, tantalite, and pigments in a short time. <The vacuum inside the tank allows for the suction of powder raw materials> ◎ No entrapment of air bubbles! ◎ Prevents the formation of lumps! ◎ Reduces processing time! ◎ No powder adhesion around the liquid surface! ◎ Prevents the scattering of powder within the factory! ◎ Optimal conditions can be set (automated) according to the processed materials! *For more details, please download the catalog or contact us.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Effective for the dispersion and mixing of high-viscosity materials such as thickening agents! This newly developed mixer (patent obtained) breaks down clumps with high shear force and mixes the entire batch uniformly.

**Features** - Capable of dispersing and mixing high-viscosity materials. - Efficiently flows the processing liquid and foam through "three-dimensional wings" and "S-shaped effects." - Excellent suction from the axial direction and discharge in the radial direction, ensuring uniform mixing throughout. - Effective for dispersing and mixing materials that tend to float near the liquid surface or settle at the bottom of containers. - A turbine with a three-dimensional structure that allows foam and processing liquid to flow naturally. ◆◇━━━━━━━━━━━ 　　　Testing Now Available! ━━━━━━━━━━━━◇◆ If you have materials that are difficult to disperse or homogenize, please give it a try. Feel free to contact us if you wish to request a test.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Telecorta has been renewed to be even more resistant to high viscosity! It demonstrates effectiveness in dissolution, dispersion, and mixing for high viscosity stirring (patent obtained). Testing is currently being accepted.

The Telecolta R is a stirring blade that generates a strong liquid flow by adopting a propeller shape while possessing dispersion power equivalent to that of a homodisperse. It exhibits strong dispersion power with the main wings that have their tips bent, and the auxiliary wings, which are slightly larger in diameter than the main wings, help reduce the entrapment of bubbles. It has been renewed to be even more effective for high-viscosity materials! *Testing for the Telecolta R is currently being accepted. For more details, please contact us using the form below.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.