★★Update★★★ The projector and brochure have been updated. ★★★

High-speed air transport system that does not require a vacuum tank, etc.

The powerful air conveyor, the ejector, is a suction device (pump) that operates as a high-speed air conveyor without the need for a vacuum tank or similar equipment. [Additional Explanation] ◆ The recommended type of ejector varies depending on the type and condition of the material being conveyed. When considering a purchase, please inform us of your requirements using the "Quotation Request Form" in the catalog to avoid any issues. ◆ Due to significant fluctuations in the prices of materials (such as stainless steel), please request a quote each time regarding pricing. ◆ The number following "JT" generally indicates the diameter of the suction side. (There may be slight discrepancies between the model number and actual size due to differences in size expressions such as inches.) ◆ As a guideline for selecting a model, it is advisable to choose one where the conveyed material is approximately half to one-third the diameter. ◆ The ejector is not well-suited for conveying highly viscous materials. ◆ While it is not adept at conveying materials that solidify upon gripping, it can handle such materials if they are mixed with more fluid substances. (Note: Materials with a shake-level viscosity can be conveyed, but mortar is not suitable as it solidifies inside and makes cleaning difficult.) The following basic information also includes explanations.

• Power tools
• Air Tools

Instantly crush soil and sand with high-speed air! It is possible to excavate soil and sand without damaging the target object!

The Air Schop is a device that uses a special nozzle to spray compressed air for excavating (loosening) hardened soil and debris. It can spray air at high speed from the tip, instantly crushing the soil without damaging the target object, allowing for excavation of the debris. 【For the safety of the operator (soil and debris may scatter during operation.)】 ■ When operating, please be sure to wear earplugs and goggles, as well as protective gear for your body. * For facial protection, please wear thick canvas or leather gloves, an apron, or equivalent gear to protect against scattering. ■ You must have basic knowledge of the safe use of air compressors. ■ When connecting compressed air, never point the Air Schop's exhaust nozzle at a person, look into it, or allow anyone to look into it. (This can cause injury.) ■ Proper use will have no impact on the environment. * For more details, please request materials or view the PDF data available for download.

• Power tools
• others

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.