【Peltier Cooler Catalog Now Available】Introducing environmentally friendly Peltier coolers that do not use refrigerants!

This is an environmentally friendly cooler that uses a Peltier element for cooling!

The "NRC Series" is a Peltier cooler that has significantly improved reliability due to the adoption of fully coated special Peltier elements. This element, used for cooling computer CPUs, employs an environmentally friendly cooling method that differs from air conditioning systems using refrigerants like Freon. By not using a compressor, it achieves significant miniaturization and maintains the conditions inside the control panel through internal circulation. 【Features】 ■ Fully coated special Peltier elements ■ Non-Freon clean cooling ■ Internal circulation system & mild cooling/dehumidification ■ Compliant with VCCI Class A (radio wave regulations) ■ AC100V–240V, free power supply *For more details, please refer to the PDF materials or feel free to contact us.

• Cooling system

Heat is a great enemy for electronic devices! To use them for a long time, it is necessary to keep the temperature low.

Introducing the relationship between the temperature inside the control panel and the lifespan and failure rate of electronic devices. Additionally, we will present the features of the control panel cooler 'ENC Series', which can solve this problem, while comparing it with traditional thermal countermeasures. 【Features】 ■ Internal circulation method that aids in "cooling, dust prevention, and dehumidification" ■ Cooling that is not affected by outside temperature ■ Reliable cooling up to the set temperature ■ Two mounting methods to choose from: side mount / ceiling mount *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel Cooler

Eliminate maintenance for a long period! You can significantly reduce maintenance costs and man-hours!

The "GR-Pro" is a control panel cooler that not only eliminates the cost of refrigerants with its "non-Freon" design but also features new functions that further reduce the burden on customers. By adopting a finless condenser, there are no clogging points, which eliminates the need for filters and significantly reduces maintenance costs and labor. The risk of failure due to clogging is also minimized. Additionally, it can connect up to 32 units at once, allowing for temperature and error display as well as setting changes. 【Features】 ■ Low maintenance due to no clogging ■ Energy-saving (eco) and powerful cooling ■ High convenience with IoT compatibility ■ Lightweight, slim, and easy to install ■ User-friendly global specifications *For more details, please refer to the PDF materials or feel free to contact us.

• Control Panel Cooler

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA