We will exhibit at the 23rd Interphex Japan 2021 Pharmaceutical and Cosmetics Manufacturing Exhibition.

It is a small, lightweight gas detector capable of measuring the concentration of hydrogen peroxide gas in the air.

The PDM+ hydrogen peroxide gas detector is a gas detector capable of detecting hydrogen peroxide gas in the environment. When powered on, it continuously measures hydrogen peroxide gas and alerts you with an LED, vibration, and sound alarm when a dangerous condition is detected. It is easy to operate, and there is a metal clip on the back of the unit, allowing it to be secured to a shirt, belt, helmet, or other items.

• Other safety equipment

This is a diaphragm-type polarographic sensor that can be used for a wide range of residual chlorine measurement applications, including pure water, seawater, wastewater, food, and groundwater.

The Q46H/62-63 residual chlorine meter adopts a polarographic membrane sensor, allowing for the direct measurement of free chlorine, active chlorine, and combined chlorine (monochloramine) without the need for reagents. Due to its diaphragm-type sensor, it is less affected by changes in the measurement liquid or impurities, enabling the measurement of residual chlorine in electrolyzed hypochlorous water, seawater, wastewater, hot springs, and pure water. Additionally, since the electrode does not come into direct contact with the measurement liquid, it is less prone to contamination and has a long lifespan. By adding a pH sensor option, simultaneous measurement of chlorine and pH is possible. The pH correction function allows for measurements even when the pH value is high or fluctuating. It has a wide measurement range, capable of measuring low concentrations below 1 mg/L and high concentrations above 100 mg/L with a single unit. 【Features】 ■ No reagents required ■ Easy installation ■ Wide and flexible measurement range ■ Cost-effective *Demo units are available, so please feel free to inquire. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

We are currently offering a comprehensive catalog featuring gas detectors capable of measuring over 30 types of toxic gases and oxygen, available for free!

The "ATI Gas Detector Series" can measure over 30 types of toxic gases and oxygen, and is used in various locations around the world, including plants and laboratories. With a lineup tailored for various applications, it contributes to maintaining a safe and secure environment. [Contents] ■ Gas Detector Series - Portable Gas Detectors - Fixed General-Purpose Gas Detectors (Model F12) - 2-Wire Transmitters (Model B12) etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment
• Other measurement, recording and measuring instruments
• Water quality testing

Dainasonics has been providing products as a leader in ultrasonic flow meters for over 30 years.

DynaSonics has been providing products as a leader in ultrasonic flow measurement for over 30 years. DynaSonics' Doppler and transit time flow meters are widely used in unique thousands of applications across various industries, including water and wastewater treatment, oil, methane extraction from mineral deposits, cooling water for power plants, semiconductor process cooling water, HVAC (heating, ventilation, and air conditioning), and many others. DynaSonics is committed to providing on-site services to customers and continuously improving technology to meet the advanced demands of fluid measurement in factories and further developing its products.

• Flow Meter

Measurement of chlorine 0-16% contained in sodium hypochlorite (bleach).

The HypoSense series, which measures chlorine in industrial sodium hypochlorite, uses an optical sensor with a measurement range of 0 to 16%. It is specially designed to withstand the harsh chemical environment of industrial bleach (sodium hypochlorite). It is resistant to pH changes, does not require reagents, is very stable, and can reduce maintenance and lifecycle costs. With a built-in temperature sensor, automatic temperature compensation is performed. *For more details, please download the PDF or feel free to contact us.*

• Food Testing/Analysis/Measuring Equipment
• Other measurement, recording and measuring instruments
• Disinfectant

PDM+ is a gas detector that continuously measures concentrations to detect a lack of oxygen in the environment and the presence of toxic gases.

PDM+ is a gas detector that continuously measures concentrations to detect the lack of oxygen and the presence of toxic gases in the environment. PDM+ allows for continuous concentration measurement by replacing the battery and sensor. When powered on, PDM+ continuously monitors whether the target gas is present in the air and warns the user with alarms through LED lights, vibrations, and sounds if there is a possibility of entering a dangerous state. Additionally, it can be used for up to three years by turning off the power after use. PDM+ is easy to operate, and it features a strong metal clip on the back of the unit, allowing it to be secured to shirts, belts, helmets, and more. The PDM+ gas detector is compatible with the Watch Docking Station and WatchGas IR Link. Both devices have the capability to download data from the PDM+ single-component gas detector. The latest 30 historical records are stored in the internal logger of the unit. Oxygen, carbon monoxide, hydrogen sulfide, hydrogen, sulfur dioxide, ammonia, hydrogen peroxide, nitrogen dioxide.

• Other safety equipment

WatchGas UNI is a compact and user-friendly single gas monitor.

UNI provides a simple portable solution for measuring various toxic gases and oxygen levels. It features a large LCD screen that maximizes readability on-site. Additionally, it has six bright red LEDs and a large buzzer for alarm notifications. Furthermore, it is equipped with a vibration alarm, allowing for safe operation even in noisy work environments or while wearing hearing protection. To ensure protection in harsh environments, UNI is made from durable and robust materials. Its surface is designed with a rounded shape that offers a good grip, making it easy to use even when wearing multiple layers of protective clothing. It can detect carbon monoxide, hydrogen sulfide, oxygen, sulfur dioxide, chlorine, nitrogen monoxide, nitrogen dioxide, hydrogen, phosphine, ethylene oxide, ammonia, chlorine dioxide, ozone, hydrofluoric acid, hydrochloric acid, hydrogen cyanide, methyl mercaptan, tetrahydrothiophene, acetaldehyde, arsine, and phosgene.

• Other measurement, recording and measuring instruments
• Other safety equipment

Compatible with low to high viscosity! Ideal drum/hand pump for extracting and transferring food and cosmetic ingredients! Easy to clean due to the low number of parts!

Obtained certification for strict hygiene standards! A wide range of drum pump series that protect the quality and safety of cosmetics, pharmaceuticals, and food. The "Sanitary Drum Pump Catalog" is the pump product catalog of Sunny Trading Co., Ltd., which imports and sells industrial products and parts from various companies in the United States and Europe. Featuring high-quality and hygienic "3A sanitary pumps," as well as ideal "sanitary pumps" for food processing and the pharmaceutical and cosmetics industries, we offer a rich lineup of standard 3A/FDA certified pumps particularly suited for food and cosmetic applications, tailored to various uses. [Contents] ■ Air-driven/electric-driven drum pumps for high viscosity ■ Air-driven/electric-driven drum pumps for low viscosity ■ Accessories ■ Sanitary batch control systems ■ Lifters for sanitary drum pumps, and more [Applications] Transfer of intermediate raw materials Bulk transfer Transfer of food ingredients, cosmetic lotions, and pharmaceuticals For more details, please refer to the catalog or feel free to contact us.

• Other pumps
• Positive Displacement Pump

Air-driven sanitary diaphragm pumps are special pumps suitable for the food and pharmaceutical industries! Since they do not use electricity, they can be used in explosion-proof areas!

Sanitary pumps are special pumps suitable for the food and pharmaceutical industries. The stainless steel is surface-treated (32Ra), the swivel mount stand is compatible with CIP, and it features energy-efficient, oil-free valves. Sizes: 1-1/2” to 3” For more details, please contact us or download the catalog.

• Other pumps
• Positive Displacement Pump
• Special Pump

The EODD electric sanitary diaphragm pump is highly energy-efficient! It can transport solids and slurry liquids. It has numerous achievements in the food and pharmaceutical industries!

EODD (Electric Diaphragm Pump) is a highly energy-efficient and energy-saving pump compared to AODD (Air-Driven Diaphragm Pump). It is specially designed for the food and pharmaceutical industries due to its sanitary specifications. This sanitary pump is designed to meet strict safety standards through 3A certification and TPV. The wetted parts are made of stainless steel and polished to 32Ra. It has a structure that is very easy to maintain. For more details, please contact us or download the catalog.

• Other pumps
• Positive Displacement Pump
• Special Pump

Chemical relief valves, back pressure valves, and other components available! A variety of materials in the lineup! PTFE, stainless steel, ALLOY20.

We offer a lineup of relief valves and back pressure valves made from various materials and sizes, including PTFE, PVDF, PP, CPVC, PVC, Halar, SUS, titanium, and Alloy 20 (Carpenter 20). Due to their simple structure, parts can be replaced without removing them from the local line! Additionally, pressure adjustments can be made while they are still installed in the line! We also handle products such as PVC and glass calibration cylinders, chemical injection systems, injection quills, check valves, filters, and dampers that absorb pulsation. We also offer custom designs, so please feel free to contact us.

• valve

Compliant with CIP and SIP! Introducing SAWA's sanitary magnetic pump with fewer parts and easy maintenance *Maximum flow rate of 240m³/h.

We are introducing a variety of SAWA sanitary magnetic pumps. These include the "HD Series - Self-priming," a spiral pump capable of excellent pumping action for liquids containing gases, with low maintenance costs and a long lifespan; the "LE Series," suitable for rapid temperature changes; and the "LES Series," which comes with an inducer-equipped pump cover and a complete recirculation system, among other SAWA pumps. 【Features】 ■ World standard, Swiss quality since 1911 ■ Pharmaceutical design ■ No leakage ■ Electro-polished ■ Tough and highly durable ■ Seal-less structure ■ Compact and dead space-free (hygienic design) ■ Easy disassembly, cleaning, and reassembly ■ Surface roughness Ra < 0.4μm *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We will be exhibiting at the "1st [Nagoya] High-Performance Plastics Exhibition -PLASTIC JAPAN-" held at Port Messe Nagoya. We will introduce samples and characteristics of our carbon nanofibers blended with various resins. The conductive carbon nanofiber (high dispersion) ALP-NK1 (550W/mK) has also been added to our product lineup, and we will propose materials tailored to customer needs, starting with heat dissipation applications. Additionally, we will showcase extruded round bars of PEEK blended with carbon nanofibers and their processed products, as well as doctor blades designed for battery materials. As a business model for our nanomaterial business, we offer sales of CNF powder and prototype sales of resin blends (pellets and liquid resins) according to customer requests. Furthermore, we will introduce various silicon materials, including silicon monoxide, which is gaining attention as electrode materials for high-capacity lithium-ion secondary batteries, as well as magnesium balls. We welcome various requests regarding compounds, alloys, purity, particle size, and shapes, so please feel free to stop by our booth for consultation. We sincerely look forward to your visit.

Our company will be exhibiting at the "Fukushima Tech Create 2026 Results Presentation" held in Okuma Town, Fukushima Prefecture. At this event, promising startups aiming for entrepreneurship and technological development in areas such as Hamadori, Fukushima Prefecture, will present their research and business results. ★ Participating Industry Fields Decommissioning / Robotics and Drones / Energy, Environment, and Recycling Agriculture, Forestry, and Fisheries / Medical-related / Aerospace On the 29th (Thursday), a talk event featuring notable figures and local entrepreneurs will also be held. A collection of attention-grabbing technologies that will shape the future will be gathered, so please feel free to stop by the IIDA booth when you visit. [Limited Company Iida Seisakusho Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-64-2320 FAX: 0243-64-2571

Our company will be exhibiting at the "1st Mobility Material Exhibition during High-Performance Material Week." We sincerely look forward to your visit.

[Speaker] Yuichi Ikejiro, Deputy Director, Innovation Center, NTT Docomo Business Inc. [Key Lecture Content] NTT Docomo Business is responsible for corporate ICT business within the NTT Group. It provides a one-stop solution for corporate clients across the entire group, aiming to solve social issues and become a platform for industrial and regional digital transformation (DX) through support for large enterprises and local small and medium-sized enterprises. In this context, the Innovation Center plays a role in exploring and nurturing new business ideas, driving the creation of new businesses and their implementation in society. In this lecture, I would like to introduce the initiatives aimed at creating new businesses utilizing advanced technologies such as AI and IOWN that are promoted by the Innovation Center. [Lecture Items] 1. About NTT Docomo Business / Innovation Center 2. Technology roadmap looking towards 2030 3. Creation of new businesses through open innovation 4. Value creation promoted through design thinking 5. Initiatives for business creation utilizing advanced technologies such as AI, IoT/OT, and IOWN 6. Q&A / Business card exchange

[Speaker] President and CEO of ICT Solution Consulting Co., Ltd. / Creator Takashi Tominaga [Lecture Topics] 1. Review of last year's future predictions 2. Signs of a major upheaval (from 10 news stories) 3. Background of the major upheaval (triggered by Trump 2.0) - The U.S.-China space war and the emergence of disruptors (not innovators but destroyers) - Disruptors' destructive business models (subscription services, overwhelming cost competitiveness) 4. The essence of the major upheaval - The intersection of two massive revolutions (VC revolution and operation revolution) 5. What the major upheaval brings (making industry hierarchy (scale) meaningless) - Industries disintegrating (the risk of existing industries being taken over by platforms, especially in finance, healthcare, administration, national defense, IT, etc.) - Companies disintegrating (the possibility of bankruptcies of companies exceeding one trillion yen, encirclement by disruptors from small and medium-sized enterprises with technology) - Operations disintegrating (operation models using minimal human resources) - Employees disintegrating (the disappearance of the middle class, talent filtering by AI) 6. Overcoming the major upheaval and the concept of transformation (metamorphosis) 7. Q&A and business card exchange