Deodorizing and Odor Removal System "Nioix"

Deodorant made from 100% plant-based ingredients that breaks down and eliminates odor-causing components. Samples of the deodorant are available. Case studies on deodorization measures are also being published.

The "Nioix System" is a deodorization and odor removal system that utilizes the biodegradable deodorant "Yume Shota," made from 100% plant-based materials. The deodorizing effect has been verified through tests conducted by the Japan Analysis Center. By spraying a diluted solution, it quickly decomposes various components that cause unpleasant odors, such as ammonia, trimethylamine, and toluene, demonstrating its deodorizing effectiveness. This simple system design developed by a deodorant manufacturer can be used for deodorizing stagnant air and exhaust, and it has been widely adopted in resource recycling plants and food waste processing facilities. 【Features】 - Generates fine mist with a two-fluid automatic dilution deodorizing spray device. - Decomposes ammonia, trimethylamine, and other odors in a short time. - Suitable for odor control in various factories, as well as in fishing net cleaning facilities, sewage treatment plants, and poultry farms. *We are currently offering free samples of the deodorant. Please apply through the "Contact Us" section. You can also view the "Deodorization Case Study Collection" via PDF download.

• Air purifiers

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.