"Dynamic Viscoelasticity Measurement and Examples of Data Interpretation" edited by the Technical Information Association, published.

New viscoelastic measurements using ultrasound can be performed. The viscoelasticity of liquids, solids, bulk, and surfaces can be measured. It is particularly effective for analyzing surface degradation and skin layers!

Until now, viscoelastic measurements were generally limited to around 100 Hz, but higher frequencies were desired for actual products. The HFR002 can measure complex viscoelasticity using ultrasonic propagation. All strains propagate at the speed of sound, resulting in overall deformation. Those with significant attenuation are referred to as viscoelastic materials. The storage modulus can be measured at the speed of sound. The loss modulus can be measured from the attenuation. Our proprietary surface method allows for the analysis of surface degradation and the effects of the skin layer, which were previously impossible to assess.

• Other measurement, recording and measuring instruments

Measurement of megahertz viscoelasticity at room temperature is possible! A device that can measure the high-frequency viscoelasticity of fluids.

"Liq-F" is a high-frequency viscoelastic measurement device capable of measuring fluid viscoelasticity using ultrasound. It can measure megahertz viscoelasticity at room temperature, which was not possible before, allowing for an understanding of high-frequency viscoelastic properties in the usage conditions of high-performance fluids. It can measure not only bulk properties but also surface megahertz viscoelasticity. 【Features】 ■ Capable of measuring megahertz viscoelasticity at room temperature ■ Capable of measuring surface megahertz viscoelasticity ■ Easy to disassemble and clean For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

Rheometer attachment type! A viscoelastic measurement device capable of measuring viscoelasticity using ultrasound.

The "HFRU" is a high-frequency viscoelastic measurement device that can perform viscoelastic measurements using ultrasound while applying low-frequency vibrations and rotations. It is expected to measure megahertz viscoelasticity under large strains, which was not possible before, allowing for the understanding of nonlinear viscoelastic properties of high-functionality fluids under shear. In addition, it can perform simultaneous measurements with rheometer functions, and it is capable of measuring not only bulk properties but also surface megahertz viscoelasticity if the loss is significant. 【Features】 ■ Easily set up on MCR ■ Measurement at eccentric positions is possible ■ Optical observation can be performed simultaneously with ultrasonic measurement (separately) ■ Rheometer attachment type *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Ejectors tend to be avoided due to their enormous consumption of compressed air. However, they also have many advantages, such as noise reduction, no heat generation, and no vibrations. When used properly, they can also achieve energy savings. ■ Space-saving, noise reduction, and heat prevention! Goodbye, electric pumps Large ejectors are ideal for replacing electric pumps. Their impact is significant and greatly contributes to improving the environment in manufacturing sites. Moreover, maintenance can be done without tools. For more details, visit: https://www.ipros.jp/catalog/detail/718575

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x1, eDP x1, DP x1, HDMI x1 ● LAN x3, SATA 6Gb/s x1, 8-bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● M.2 2280 M-Key x1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Features: ● Equipped with Intel Core i3-N305 / Processor N97 ● DDR5 4800MHz SO-DIMM x1 slot (up to 16GB) (sold separately) ● LVDS Dual Channel 18/24 bit x1, VGA x1, HDMI x1 ● Intel 2.5GbE x2, SATA 6Gb/s x1, 8bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● Full size mPCIe/mSATA ● M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heatsink included * Memory, storage, and OS sold separately