The effectiveness of the ultraviolet lamp installed in our company's ultraviolet sterilization products against the novel coronavirus has been confirmed.

Lightweight and easy to carry! Small and easy to store! This is a compact lighting device that sterilizes viruses and bacteria in all directions using the power of ultraviolet light. *Case studies available.

With six features, it easily and safely disinfects indoor spaces with high efficiency using ultraviolet light. 1) Powerful Disinfection Ability: Uses the most powerful ultraviolet light (UVC) to inactivate viruses and bacteria, achieving a 99.9% disinfection rate. 2) Purely Made in Japan: All aspects of product planning, design, parts, and assembly are safely made in Japan. It eliminates complex electronic devices, enhancing durability and usability for easy long-lasting use. 3) Safe and Secure: Reduces the risk of infection associated with cleaning and disinfection wiping tasks. Equipped with a lighting timer, rotating light, and warning buzzer for safe usage. 4) All-Directional Disinfection: Equipped with four 15W disinfection lamps, it can disinfect spaces, air, and surfaces in a full 360° range. It has a purification effect equivalent to 60-120 air changes per hour. 5) Easy Maintenance: The lamp has a lifespan of 6000 hours, eliminating the need for frequent replacements. The lamp can be easily replaced by removing the cover. 6) Maximum Efficiency in a Short Time: Significantly reduces the burden of disinfecting floors and equipment, as well as wiping cleaning tasks. ★ The effectiveness of the installed ultraviolet lamp against the novel coronavirus (Wuhan strain) has been confirmed. For detailed product information and experimental results, please check the PDF download.

• Other lighting equipment

We will eliminate anxiety about viruses and bacteria, as well as infection risks, with the power of ultraviolet light.

We spoke with Mr. Mutsuki Sato, the director of the "Yamanashi Workers' Medical Association Isawa Kyoritsu Hospital," about the background of introducing the Sterilization Trite. Isawa Kyoritsu Hospital has introduced and is operating four Sterilization Trite units. This time, we have compiled an interview regarding the reasons for the purchase, the improvements made after the purchase, and the decisive factors for the purchase. Please download the catalog for more information.

• others

A lighting device that sterilizes viruses and bacteria in all directions using the power of ultraviolet light. It is also easy to carry. Please use it for infection control, disinfection, and to shorten sterilization work time.

With six features, it easily and safely sterilizes indoor spaces with high efficiency using ultraviolet light. 1) Powerful Sterilization Utilizing the most powerful ultraviolet light (UVC) for inactivating viruses and bacteria, it offers strong sterilization power. *99.9% sterilization of viruses and bacteria. 2) Purely Made in Japan Product planning, design, parts, and assembly are all reliably made in Japan. It eliminates complex electronic devices, enhancing durability and usability. Easy and long-lasting. 3) Safe and Secure Reduces the risk of infection associated with cleaning and disinfection wiping tasks. Equipped with a lighting timer, rotating light, and warning buzzer for safe use. 4) All-Directional Sterilization Equipped with four sterilization lamps, it can disinfect spaces, air, and surfaces in a 360° range. *Provides a purification effect equivalent to 60-120 air changes per hour. 5) Easy Maintenance Lamp lifespan is 8,000 hours. Frequent lamp replacement is unnecessary. The lamp can be easily replaced by removing the cover. 6) Maximum Efficiency in a Short Time Significantly reduces the burden of disinfecting floors and equipment, as well as wiping cleaning tasks. Estimated disinfection times are: Approximately 15 minutes for a 6-tatami room. Approximately 20 minutes for an 8-tatami room. *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

In the field of collaborative robots, there is a demand for reduced startup labor, energy efficiency, and safe yet flexible handling performance. In particular, reliance on compressed air systems and complex wiring and piping can pose challenges during installation and operation. Piab's "piCOBOT Electric for ABB GoFa" is a plug-and-play electric vacuum gripper solution optimized specifically for ABB GoFa. Its all-electric design generates vacuum using only electricity, eliminating the need for compressed air. This enables the creation of a clean, quiet, and energy-efficient collaborative robot cell. Furthermore, by adopting ABB GoFa-specific software plugins, designated cables, and standard ISO machine interfaces, smooth integration into the ABB control environment is possible. This supports rapid startup and stable operation. Read the article here: https://www.piab.com/ja-jp/news/piab-launches-picobot-electric-for-abb-gofa

We have added the DL material "Explained in Manga! Let's Prevent Technical Information Leakage to the Outside with CrackProof Software Protection!" to the DNP Hypertech site. In the manufacturing industry, there is a growing awareness of measures against the leakage of technical information. Many companies seem to have already established sufficient rules and measures for information protection when exchanging data with external parties. However, when it comes to cases where in-house software suffers from cracking (unauthorized analysis and tampering) and information leaks occur, the current measures are still not adequate. We have explained the measures against technical information leakage through software protection in an easy-to-understand manga format. Please take a look.