Notice of advertisement published in the Chemical Industry Daily, January 26, 2022 issue.

[Sanitary Product / Heller Joint Specification] Designed for the large-volume transfer of high-viscosity liquids; it is disassemblable for cleaning! This is a separate type air vacuum pump.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available with sanitary-grade ferrule fittings ● The sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Closed drum negative pressure type, suction only, no discharge ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can efficiently and safely collect without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. * Please contact the disposal company for disposal methods.

• Other pumps

[Sanitary product / H-elbow fitting specification] For large-capacity transfer of high-viscosity liquids; can be disassembled for cleaning.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of minor foreign substances ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary specifications with hygienic fittings ● Sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Closed drum vacuum type for suction only, discharge not possible ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can efficiently and safely collect without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. * Please contact the disposal company for disposal methods.

• Other pumps

For solvents, acids, and alkalis: A separate type air vacuum pump for transferring high-viscosity liquids in large volumes, capable of disassembly and cleaning!

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate 《Benefits》 ●Safely suction volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy to clean due to a structure that allows for disassembly ●Available with sanitary-grade ferrule fittings ●Sanitary type has a proven track record in food use (APDQS-1s, 1.5s) *Does not comply with the Food Sanitation Act 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Closed drum vacuum system for suction only, discharge not possible ●Separated pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can safely and efficiently collect without using electricity thanks to the ejector mechanism. The collected drum can be handed directly to a waste disposal company. *Please contact the disposal company for disposal methods.

• Other pumps

For oil: Large-capacity transfer of high-viscosity liquids; disassemblable for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate 《Advantages》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary-grade hygienic fittings ● Sanitary type has a proven track record in food use (APDQS-1s, 1.5s) *Does not comply with the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Closed drum vacuum system for suction only, discharge not possible ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of Air Vacuum Pump》 This pump collects various liquids such as kerosene, diesel, oil, and chemicals from closed drums. It can efficiently and safely recover without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. *Please contact the disposal company for disposal methods.

• Other pumps

Ideal for transferring liquids from solvent drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual function for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Includes grounding wire for static electricity prevention *Only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

For transferring high-viscosity liquids in large volumes for solvents, acids, and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated for JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

For oil: Large capacity transfer of high-viscosity liquids; disassembly and cleaning possible.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with a small amount of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drum, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

[Sanitary product / Heloor joint specification] For large-volume transfer of high-viscosity liquids! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design without electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Advantages》 ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-efficient ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separate

• Other pumps

For transferring high-viscosity liquids in large volumes for acids and alkalis! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-efficient ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with a regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge without waste ◎Discharge method can also be selected 《Advantages》 ●Minimal residual liquid (about 200cc), can discharge without waste ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids in small quantities.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge ◎Discharge method can also be selected 《Benefits》 ●Minimal residual liquid (approximately 200cc), capable of efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drums, not for recovery ●Double pressure reduction with a regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of the Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Advantages》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

Radial piston type air-operated handy pump that can be used in explosion-proof areas and is easy to carry! For transferring liquids from tanks or drums such as kerosene and diesel.

"AMVH Series" AMH1D-20FC (For oil, kerosene, and light diesel / For drums) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Safe due to air-driven operation with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Available in a hose connection type for drums "Mechanism of the Radial Piston Motor" A motor that operates by alternately compressing air into three pistons. With three pistons built-in, it is characterized by high discharge pressure. It can transfer high viscosity liquids (up to 2,000 cP) to heights and distances within 15m.

• Other pumps

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a greater variety of compatible liquids compared to our previous model (CHD-20SUS)! Suitable for solvent transfer in chemical plants.

**CHD1 Series** CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) ● Continuous operation possible ● Lightweight and compact body ● Inexpensive **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated to JIS standard 200L closed drums (large plug G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 22L/min ● For discharge only **Applications** Not only in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. Additionally used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air-operated model (CHD1-20ASUSN). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Ethyl acetate ■ Butyl acetate ■ Hydrogen peroxide ■ Sodium hydroxide ■ Nitric acid (30% concentration)

• Other pumps

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**CHD1 Series** CHD1-20ASUS (for solvents) CHD1-20ASUS-V (for solvents / with ball valve) CHD1-20ASUS-N (for solvents / with gun nozzle) ● Oil-free air motor type ● Lightweight and compact body ● Inexpensive **Features** ● Safe and secure due to air drive ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 20L/min (with nozzle) ● Discharge only **Applications** Used not only in metal plating factories and semiconductor manufacturing but also in chemical plants, pharmaceutical warehouses, and other sites. Additionally, it is used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flames, please use the air-operated model (CHD1-20ASUS-N). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Alcohol ■ Thinner ■ Acetone ■ Methanol ■ MEK, etc.

• Other pumps

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding the Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are present inside the nozzle).*

• Other pumps

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration)! Electric chemical drum pump.

**CHD Series** CHD-20PP (for solvents) CHD-20PPV (for solvents / with ball valve) CHD-20PPN (for solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid discharge. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• Other pumps

Air-operated portable hand pump for solvents / pump unit and drum can, suitable for use in explosive areas.

ACH Series" ACH-20SUS (for solvents / pump only) ACHD-20SUS (for solvents / for drum cans) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum can ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a hose connection type for drum cans "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height difference, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

Air-operated portable hand pump for kerosene and light oil, suitable for use in explosive areas, with both ends for drum cans and hoses.

ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACHD-20AL (for kerosene and light oil / for drums) ACHH-20AL (for kerosene and light oil / hose at both ends) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Available in types for drums and hose connections "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height differences, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

[For Solvents/Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

**CHD Series** CHD-20AHP (For solvents) CHD-20AHPV (For solvents / with ball valve) CHD-20AHPN (For solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, eliminating concerns about electric leakage ● Air motor type with high discharge volume, non-pulsating ● Designed exclusively for discharge **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• Other pumps

Hand-cranked pump that performs exceptionally well even in emergencies! Lightweight with a resin body, ideal for dispensing organic solvents.

**HRP Series** HRP-25Z (for solvents) HRP-25ZM (for solvents / with hose and sealed adapter) ◎ Hand-cranked pump that does not require a power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power source required ● Can also dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.1) ● Safe for highly volatile liquids with a sealed adapter (HRP-25ZM) ● Very useful in emergencies and disasters ● Can handle weak acids and weak alkali chemicals with resin material (HRP-25Z series) **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion; bending them excessively may cause tearing.*

• Other pumps

Hand-cranked pump that performs exceptionally well even in emergencies! Lightweight body made of resin, suitable for dispensing organic solvents.

**HRP Series** HRP-25III (For solvents) HRP-25IIIH (For solvents / with hose) HRP-25IIIHM (For solvents / with hose, sealed adapter, and ground wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Advantages** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power supply needed ● Can also dispense highly flammable organic solvents ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.1) ● Safe for highly volatile liquids with sealed adapter (HRP-25III HM) ● Great for emergencies and disasters **Features** ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause them to tear.*

• Other pumps

No oil refilling required with lubricators; equipped with a maintenance-free air motor for powerful performance! Speedy ventilation!

"Oil-Free Air Axial Flow Fan and Blower Series" AFR-08NL/AFR-12NL ◎ Equipped with an oil-free air motor Can be used without oil and without a lubricator. It features a long-lasting motor capable of continuous operation, suitable for use in explosion-proof areas. ◎ An essential item for explosion-proof and heat hazard areas! Ventilation for infection control! Because it is air motor-driven... Point 1: Lightweight! Up to 1/4 the weight of electric pressure-resistant explosion-proof blowers (compared to other manufacturers' 12-inch model axial flow fans weighing 25.5 to 37.5 kg) Point 2: Safe and secure without using power! Point 3: Fewer failures! Can be used as a circulator. 《Applications》 ● Heatstroke prevention ● Infection control measures for COVID-19 and other diseases ● Efficiency improvement for drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 5-40°C) *Please consult separately for other environmental conditions 《Field Use》 Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, replacing explosion-proof fans, and installation in manholes on ships and decks.

• Ventilation and Exhaust

Chemical plants, aircraft factories, shipyards, painting booths. For ventilation, air supply, and cooling of machinery in plants and explosion-proof areas, etc.

"Fan Series" AFR-18 (Fan diameter 450mm) [Discontinued] AFR-24 (Fan diameter 600mm) AFR-08NL (Fan diameter 200mm) AFR-12NL (Fan diameter 300mm) AFR-18NL (Fan diameter 450mm) ◎ Air motor factory fan that does not use electricity ◎ Standard equipped with air filter and lubricator ◎ Easy to operate "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas since the power source is air ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to topple "Features" ● Standard equipped with air filter and lubricator * Please use No. 32 lubricating oil. ● Duct hose can be attached as an option "Applications" ● Heatstroke prevention ● Efficiency improvement for drying work ● Ventilation and air blowing in narrow spaces such as manholes and tanks ● Connecting ducts for ventilation and air blowing in manholes ● Exhaust gas discharge for construction vehicles and heavy machinery ● Air circulation in high-temperature areas and drying rooms

• Other pumps

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The listed items were exhibited and introduced at the exhibition "Green Material 2026." Please feel free to download the materials from the link below and contact us. Japanese emulsifiers are used by customers in many industries and fields. Depending on your application, we can also introduce grades that are not listed in the catalog. - Surfactant "Newcall" - Amino alcohol-based, morpholine-based, piperazine-based "Amines" - Gas absorbents and neutralizers "Amino Alcohol" - Glycol ethers and amines for electronic materials "Metallify" - Industrial cleaning agents "Minemal" - Cellulose-dissolving ionic liquids "Amino Ion" *Newcall, Metallify, Minemal, and Amino Ion are registered trademarks of Japanese Emulsifiers.

Are you struggling with additional costs and delays due to mold cracking, chipping, or excessive tool wear during press forming? Simply simulating the formability of product shapes does not adequately assess the risks on the mold side. Therefore, an effective approach is to combine this with mold load analysis using the analysis software "DEFORM." - Damage Prevention: Visualization of maximum principal stress to identify risk areas for mold cracking and chipping - Improved Lifespan: Predicting the progression of tool wear to support optimal maintenance cycles and material selection - Quality Stability: Precisely simulating variations in thickness and bending accuracy For more details, please refer to the related link.

This time, I will explain the differences in roles between the "accounting system" and the "document management system," which are surprisingly not well-known, as well as points that are often overlooked in legal compliance. ■ The difference between accounting systems and document management systems is their "scope of coverage." - Accounting System = Management of "money (numbers)" - Document Management System = Management of "evidence (documents)" ■ Documents often overlooked by accounting systems The accounting system primarily focuses on "accounting processing." - "Estimates" where no money movement occurs - "Delivery notes" and "purchase orders," which are intermediate points in transactions ⇒ There are cases where these are not stored or managed within the accounting system. This could be considered a deficiency under the Electronic Bookkeeping Preservation Act. ■ Supplementing the missing parts with an "independent system" While there are high-function ERP (Enterprise Resource Planning) systems that can manage everything from estimates to invoicing seamlessly, the reality is that the cost can be a significant barrier to implementation. Therefore, managing documents with an independent document management system like paperlogic is also an option. Paperlogic is currently offering a free trial. Please feel free to contact us.

We will be exhibiting at the "Supermarket Trade Show 2026" held at Makuhari Messe. 1. Date: February 18 (Wednesday) to February 20 (Friday), 2026, from 10:00 to 17:00 (ends at 16:00 on the final day) 2. Venue: Makuhari Messe Booth number 10-119 3. Exhibition content: Introduction of household products including new items - Black sesame almond kinako - Fermented nuka-doko - Mixed black syrup and kinako - Slightly sweet harmony kinako All of our staff sincerely look forward to your visit.