We will exhibit at the 18th FC EXPO (Spring) International Hydrogen and Fuel Cell Exhibition.

Gas pressurization with a maximum of 150 MPa achieved! Compatible with various gases such as hydrogen (for hydrogen stations, etc.), helium, oxygen, carbon dioxide, and rare gases!

This compressor is a small air-driven gas booster manufactured by HASKEL that "does not use electricity." It can compress various gases while maintaining high purity. Features: - Air-driven, so no electricity is required. The only utility needed is instrument air. - Boosted gas pressure: Proven up to 150 MPa. - Compact design. - Multi-stage compression. - Proposals for system integration are also possible. - Compliant with high-pressure gas safety laws. - Our company offers prompt maintenance support. Operating Structure: - It consists of a large-area air-driven piston that operates in a cycling motion and a small-area gas piston connected to it. The air drive section is equipped with a cycling spool and a pilot valve, and when compressed air is supplied, the gas booster continuously performs reciprocating motion. - The structure prevents process gas from mixing into the air drive section through a dynamic seal. Additionally, there is an exhaust port for discharging gas to the atmosphere, designed to prevent contamination from entering the gas section. If you provide us with your specifications, we will suggest a suitable model. Please feel free to consult with us.

• Other pumps
• Injection Molding Machine
• others

Supports ultra-high pressure! Featuring BuTech products!

This catalog introduces a wide range of products from BuTech, including "valves, fittings, tubes, and accessories" that we handle. The company was established as a manufacturer specializing in components for high-pressure piping systems. Their standard product range, from low pressure to ultra-high pressure, can meet most requirements, and they also respond to requests for special specifications in terms of materials and design conditions. In this catalog, we feature products such as the "Ball Valve (210~1380BAR) 2-way on-off type" with a stem that has no blow-off and a high safety ball type, as well as trunnion valves, tube valves, and accessories. [Items Listed] ■ Ball Valves / Trunnion Valves ■ Pipe Valves (690~1030BAR) NPT Thread Type 1/2 ■ Tube Valves ■ Structure and Options for Needle Valves ■ Accessories *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• valve
• tube

We handle the world's highest quality fittings, piping, valves, and other high-pressure equipment manufactured by the Swiss company NOVA as the exclusive distributor in Japan.

We are a manufacturer of high-pressure equipment that can be used up to 700 MPa. Our product quality is extremely high, and we have a proven track record of being used without any issues even in harsh conditions where other companies' products have broken down in just a few months.

• valve
• Pipe Fittings
• Piping Materials

Achieve leak-free high-purity gas pressurization filling! A wide range of lineup available!

The "Metal Diaphragm Compressor" is a product handled by our company from FLUITRON. It can be used for pressurizing and filling gases such as hydrogen, oxygen, helium, argon, ethylene, natural gas, and fluorine gas. Using a triple-structured diaphragm, it supplies gas without leaks and ensures cleanliness. It can accommodate a wide range from small to large sizes according to pressure and flow rate. 【Features】 ■ The gas is clean with no contamination concerns ■ No leaks ■ Complies with KHK testing in Japan ■ Made of rust-resistant materials for durability and long life ■ Available in single-stage, two-stage, multi-stage compression, and various multi-composite models ■ Design and manufacturing of standalone units and systems ■ Easy operation and maintenance ■ Standard equipped with an automatic leak detection system *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Piping Materials

PDM+ is a gas detector that continuously measures concentrations to detect a lack of oxygen in the environment and the presence of toxic gases.

PDM+ is a gas detector that continuously measures concentrations to detect the lack of oxygen and the presence of toxic gases in the environment. PDM+ allows for continuous concentration measurement by replacing the battery and sensor. When powered on, PDM+ continuously monitors whether the target gas is present in the air and warns the user with alarms through LED lights, vibrations, and sounds if there is a possibility of entering a dangerous state. Additionally, it can be used for up to three years by turning off the power after use. PDM+ is easy to operate, and it features a strong metal clip on the back of the unit, allowing it to be secured to shirts, belts, helmets, and more. The PDM+ gas detector is compatible with the Watch Docking Station and WatchGas IR Link. Both devices have the capability to download data from the PDM+ single-component gas detector. The latest 30 historical records are stored in the internal logger of the unit. Oxygen, carbon monoxide, hydrogen sulfide, hydrogen, sulfur dioxide, ammonia, hydrogen peroxide, nitrogen dioxide.

• Other safety equipment

WatchGas UNI is a compact and user-friendly single gas monitor.

UNI provides a simple portable solution for measuring various toxic gases and oxygen levels. It features a large LCD screen that maximizes readability on-site. Additionally, it has six bright red LEDs and a large buzzer for alarm notifications. Furthermore, it is equipped with a vibration alarm, allowing for safe operation even in noisy work environments or while wearing hearing protection. To ensure protection in harsh environments, UNI is made from durable and robust materials. Its surface is designed with a rounded shape that offers a good grip, making it easy to use even when wearing multiple layers of protective clothing. It can detect carbon monoxide, hydrogen sulfide, oxygen, sulfur dioxide, chlorine, nitrogen monoxide, nitrogen dioxide, hydrogen, phosphine, ethylene oxide, ammonia, chlorine dioxide, ozone, hydrofluoric acid, hydrochloric acid, hydrogen cyanide, methyl mercaptan, tetrahydrothiophene, acetaldehyde, arsine, and phosgene.

• Other measurement, recording and measuring instruments
• Other safety equipment

It is possible to analyze a stable mixture of hydrogen and two types of noble gases over an extremely long period.

- Stable analysis of hydrogen and a mixture of two noble gases over an extremely long period. - Analysis possible in a minimum range of 0 to 5000 ppm. - Very limited range up to 99.5-100%. - Ultra-fast response time of T90 of 3 seconds. - For measuring process gases such as chlorine, hydrochloric acid, sulfur dioxide, and water, TCD cells are used. - Highly corrosion-resistant materials such as aluminum oxide, glass, and quartz are utilized. - Up to three components can be corrected to reduce mutual interference.

• Other measurement, recording and measuring instruments

It is a state-of-the-art thermal conductivity hydrogen gas analyzer! It has a very high precision display of 99.999%, and in digital communication, it displays 99.99999%.

The LFE CONTHOS3 TCD is a state-of-the-art thermal conductivity hydrogen gas analyzer for online measurement. It employs a thermal conductivity method and can be used for measuring hydrogen gas and helium gas. Additionally, by selecting the thermostat temperature of the detector and minimizing the mutual interference of gas components, it can stably analyze two types of mixed gases, such as hydrogen gas, over a long period. <Features> - Minimum measurement range: 0 - 0.5% or 99.5 - 100% H2 in N2 - Maximum measurement range: 0 - 100% - Fast response time (T90) within 3 seconds - High corrosion resistance throughout the entire path from gas inlet to outlet - Responsiveness independent of gas flow rate - Collaboration with external gas detector channels to achieve interference correction for up to three gases - Temperature control from 50-180°C with a thermal conductivity detector (thermostat) - Reduction of operational costs due to long lifespan *For more details, please download the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

[Exhibition Display] Demonstration of pineapple adhesion dynamics using collaborative robots Dynamic display using collaborative robots and tool changers for gripping Static display of a 5kg dual-sided gripper Comparison of ejector compressed air consumption Various suction pads Foam gripper, etc. We recommend visiting on the first or second day when you can view the exhibits with relative ease. *The third day (Friday) is expected to be very crowded. 【Gripper Sale Event】 We will be selling the following two products at a discounted price at the exhibition booth. Please inquire about the special prices at the venue. ■ 'KENOS Gripper KVGL.400.100, N214.FR6.S2' URL: https://www.youtube.com/watch?v=HsNRwrDtjW0 ■ 'Collaborative Robot Hand KCS.Q110.N301.110.FR6.SX422.V1.X.X' URL: https://www.youtube.com/watch?v=GFKg3blZzdQ These products are ideal not only for actual applications but also for use as test machines. How about taking this opportunity?

Watanabe Trading Company will be exhibiting at "SEMICON Japan 2025" in collaboration with its group companies, Amaya Manufacturing, Wacom Manufacturing, and Tomco. At our booth, we will introduce quartz chambers, silicone rubber, surface modification processing, and the AI visual inspection device "NulMiL," among others. We look forward to your visit.

[Speaker] Masato Kimura, International Journalist in London [Key Lecture Content] The 30th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP30) was held in Belém, Pará, Brazil, at the mouth of the Amazon River. The much-anticipated roadmap for phasing out fossil fuels revealed deep divisions, with the only significant outcome being the tripling of adaptation funding to \$120 billion per year. Moreover, the deadline was pushed back from 2030 to 2035, becoming merely a target. The lack of leadership from Brazil, the host country prioritizing the image of being "the leader of the Amazon," the absence of the United States, Europe's financial struggles, and China's prioritization of its own interests have all contributed to these divisions. Amid escalating North-South conflicts between developed and developing countries, the United Nations' multilateralism is becoming dysfunctional. [Lecture Items] 1. The venue, Belém 2. The emerging divisions 3. The absence of the United States - Big tech and fossil fuel companies are expanding data centers across the U.S. 4. The increasing presence of China - New energy ecosystems: solar power, storage, hydrogen 5. Japan becoming a regular recipient of the Fossil Award - CCS (carbon capture and storage), co-firing of hydrogen and ammonia 6. The rebellion of indigenous peoples 7. Q&A

[Speaker] Mizuho Research & Technologies Co., Ltd. Manager Takahiro Kirihara, Sustainability Consulting Division 1 [Key Lecture Content] In February 2025, the "GX2040 Vision" was announced. Recent domestic GX policies have primarily focused on supporting the supply of GX products, as exemplified by the GX Promotion Act and GX Transition Bonds. However, this vision emphasizes the need for demand stimulation measures for companies on the purchasing side, considering the current challenges in achieving carbon neutrality solely through market principles. As measures aimed at creating a GX market are planned for the future, we will examine the responses that companies should undertake to capture the anticipated expansion of the GX market. [Lecture Items] 1. Overview of domestic GX policies and the positioning of "visualization of GHG emissions" within GX policies 2. Overview of overseas policies related to "visualization of GHG emissions" 3. Recent trends in the visualization of GHG emissions 3.1 Movements regarding inter-company data collaboration in GHG emissions calculation 3.2 New indicators for GHG emissions; reduction performance 4. Responses that companies should undertake 5. Q&A / Business card exchange

[Speaker] Takuki Abe, President and CEO of CINCA Inc. [Key Lecture Content] "I can't find the seeds for new business." "I'm making no progress in launching new businesses haphazardly." This challenge faced by many companies is largely due to the know-how relying on individual experiences and not being established within the company as a reproducible "model." CINCA specializes in the 0→1 of new business development and has established reproducible launch know-how through its experiences. In this lecture, Takuki Abe, the author of "The Ultimate Practical 0→1 Strategy Guide for Successful New Business Development," will present practical techniques for conducting reproducible business validation using generative AI. If you are struggling with launching new businesses, please join us. [Lecture Items] 1. Overview of new business 2. How to generate high-probability business ideas 3. Practical implementation of problem discovery and value validation interviews 4. Q&A