The new GNSS timing module Trimble 'RES720' supports dual-band, enabling the design of equipment that is resistant to multipath, spoofing, and jamming!

Supports multi-GNSS! NTP network time server for highly reliable applications.

The "TS200" is an NTP network time server designed for demanding applications that require high-precision NTP timestamps. It has obtained NEBS standards for reliability. It supports multi-GNSS and is capable of tracking GPS, GLONASS, and Beidou, enhancing redundancy and satellite utility. Additionally, it is optimized to deliver extremely stable and accurate time (TOD) synchronization for various applications that require strict timing, such as data centers, SCADA systems, and PMU synchronization. 【Features】 ■ Supports multi-GNSS ■ Obtained NEBS standards for reliability ■ Extended operating temperature range to ensure suitability for harsh environments ■ Options for AC and DC power supply ■ Compatible with antennas such as Trimble's Bullet 360 * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other network tools
• Other server related

Introduction to Trimble GPS / GNSS Products

We will propose the most suitable product that meets your needs. For more details, please contact the person in charge at t.masunaga@sscc.co.jp.

• Other network tools

Specially designed for use in densely populated urban areas! The antenna cable can be routed through the installation pole.

The "Bullet 360" is an active antenna that supports GPS L1, Galileo E1, Beidou B1, and GLONASS G1. It is specially designed for use in densely populated urban areas, and the socket is compatible with both 1-inch-14 inch parallel threads (typical for marine antennas) and 3/4 inch pipe threads. The filtering improves the stability of other RF signals to ensure reliable performance even in environments with poor interference. 【Features】 ■ Specially designed for use in densely populated urban areas ■ All-weather design package ■ The dome part is made entirely of plastic, and the bottom of the antenna has a screw-in socket ■ The socket is compatible with both 1-inch-14 inch parallel threads and 3/4 inch pipe threads *For more details, please refer to the related link page or feel free to contact us.

• antenna

Compact, low-cost, excellent accuracy and reliability! Supports deployment in both indoor and outdoor environments.

The "GM200" is a PTP edge grandmaster developed for the deployment of small cells, LTE TDD, and LTE-A. It has a wide operating temperature range and can withstand harsh environmental conditions, supporting both indoor and outdoor deployments. Not only is it designed with small cells in mind, but it also accommodates the synchronization required by macro base stations. 【Features】 ■ Continuous use of time traceable to UTC (Coordinated Universal Time) is possible ■ Adopts Trimble's GNSS solutions and holdover technology ■ Supports both indoor and outdoor deployments ■ Accommodates synchronization required by macro base stations ■ Supports small cell networks that require phase synchronization ■ Capable of reducing downtime for LTE A services * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• power supply
• Industrial PCs

The sheets used at construction sites require various considerations, including strength, workability, transportability, work burden, and safety. What we have developed is the Hyper CLT sheet (NETIS number: TH-250021-A). The Hyper CLT sheet is not just aimed at being a new "wooden sheet." What we value is that it can truly be used on-site and that we can make proposals based on evidence rather than intuition. To achieve this, we have focused on the feedback and usability obtained from actual construction sites while advancing the acquisition and verification of various data through collaboration with universities. Points that may be difficult to see in solo corporate development have been organized from a more objective perspective by incorporating university expertise, which has been reflected in product development. It needs to be evaluated comprehensively, considering weight, maneuverability, burden during installation, consideration for the surrounding environment, and ease of introduction. In this context, the Hyper CLT sheet (NETIS number: TH-250021-A) expands possibilities as a new option based on practical insights gained on-site and data support through collaboration with universities.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)