[New Movies Added] Added movies on "About Aqua Blaster," "About Sludge Reduction," "About Oxygen Dissolution Efficiency," and "Design Concepts of Iens."

In addition to improving the quality of treated water, we have received positive feedback such as "significant sludge reduction (with a record reduction of 800 tons per year)" and "20% reduction in electricity costs"!

This catalog is a collection of case studies on wastewater treatment improvements using "Aqua Blaster." It includes examples such as the "Improvement Case of the Adjustment Tank at a Food Complex Wastewater Treatment Plant," "Improvement of a Prepared Food Factory," and "Improvement Case of a Tofu Factory's First Aeration Tank." In the "Improvement Case of Wastewater from a Major Supermarket Prepared Food Factory," not only was the treatment improved, but the odor was eliminated, and the workforce was reduced to nearly unmanned operation, achieving an annual cost reduction of 15 million yen (excluding labor costs). We encourage you to read it. 【Featured Case Studies (Partial)】 ■ Improvement Case of the Adjustment Tank at a Food Complex Wastewater Treatment Plant ■ Improvement Case of a Prepared Food Factory ■ Improvement Case of a Tofu Factory's First Aeration Tank ■ (1) Improvement Case of the Adjustment Tank at a Dressing Factory ■ (2) Improvement Case of the Adjustment Tank at a Dressing Factory - Follow-up *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Aeration/air diffusion equipment
• Other water treatment equipment

Aience has a wealth of case studies on solving various drainage issues with the dispersal device "Aqua Blaster." We will solve your drainage problems!

The aeration device "Aqua Blaster" is an aerator that guarantees the highest level of oxygen dissolution capability. The aeration device "Aqua Blaster" reduces sludge by crushing oil and suspended solids (SS) into sizes that are easier for microorganisms to consume! Since there is no pressure loss, it consumes less power compared to membrane-type diffusers, resulting in energy-saving effects. Additionally, it effectively lifts bottom sludge, preventing accumulation and eliminating anaerobic zones. 【Features of the aeration device "Aqua Blaster"】 ■ An aeration device boasting the highest level of oxygen dissolution capability ■ Achieves a 45% reduction in power consumption (compared to disc-type diffusers) ■ Crushes sludge (oil and SS) into sizes that are easier for microorganisms to consume ■ Guarantees zero odor generation! No foul odors such as hydrogen sulfide are produced ■ Intensively stirs the tank, lifting bottom sludge to prevent accumulation and eliminate anaerobic zones ■ If there is a tank that can be pre-treated with the aeration device "Aqua Blaster," it is also possible to eliminate pressurized flotation ■ An aeration device with a long lifespan of over 10 years *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Other water treatment equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will exhibit at the "Japan Pavilion" established by the Ministry of the Environment at the 30th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP30), which will be held in Belém, Brazil, from November 10, 2025. "SPACECOOL" is a radiative cooling material that enables zero-energy cooling by dissipating heat into space. At our exhibition booth, we will showcase examples of its use not only in reducing air conditioning energy in buildings but also in heat mitigation measures (adaptation strategies) for tents and parasols. The Japan Pavilion aims to promote excellent technologies, products, and services that support global decarbonization and adaptation to climate change, and to achieve Japan's long-term climate change goal of "net zero by 2050." We believe that our participation plays an important role in this endeavor. Through this exhibition, we aim to accelerate our initiatives with local partners in regions severely affected by heat issues, such as the Middle East, including Saudi Arabia and the United Arab Emirates, as well as Southeast Asia, contributing to global decarbonization and climate change measures.

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from October 1 (Wednesday) to October 3 (Friday), 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies that solve issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wednesday) to October 3 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK