[Held on 4/6!] Webinar on Preventive Maintenance for Molds

The "CPV" type has been introduced in the "Kuripika Ace" series of mold cleaning machines! In addition to the cleaning power of the "CPIII" series, it also supports diversity!

The "CPV" type has been introduced in the "Kuripika Ace" series of mold cleaning machines! In addition to the cleaning power and capabilities of the "CPIII" series, it features: ● Automatic lifting and lowering of the cleaning basket ● Flip-up type plus electrode, and more New functions that accommodate diversity! With the addition of new features, the physical burden during mold maintenance is significantly reduced. It enables mold maintenance that is accessible to people of all ages and genders. To everyone aiming for the automation and efficiency of mold cleaning: We will overturn the common notions that "mold maintenance requires skilled techniques" and "it takes time and is difficult." 【Features of the Kuripika Ace Mold Cleaning Machine】 - Automatically cleans molds arranged in a dedicated basket - Cleans multiple mold parts at once - Cleaning solution penetrates every corner of the mold, perfectly removing dirt - No damage to the mold - No organic solvents used

• Other cleaning machines
• Ultrasonic Cleaner

Wash multiple mold parts at once! Safe and secure mold cleaning without using organic solvents! Free comic materials on the dangers of organic solvents.

Using a mold cleaning spray that contains harmful "organic solvents," each mold part is maintained by hand one by one. ↓ With the safe and secure mold cleaning machine, Kuripika Ace, you can wash multiple mold parts at once! This reduces maintenance time! 【Conventional Mold Maintenance】 ● Very labor-intensive due to manual work ● Time-consuming and lacking manpower ● There are areas like the inner corners of molds that are hard to reach ● Hand polishing can cause scratches on the molds ● Concern about the burden on the body due to the use of organic solvents 【Mold Cleaning Machine 'Kuripika Ace'】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Cleans multiple molds at once 〇 Cleaning solution penetrates every corner of the mold and removes dirt 〇 Dirt is lifted and removed, causing no damage to the mold 〇 Uses a water-based cleaning solution with low environmental impact and contains no organic solvents We offer a lineup tailored to the size of the molds. *For details, please see "Lineup." : We have uploaded a comic about the dangers of organic solvents:

• Other cleaning machines

Brightness recovery and yield improvement. With the optical component mold cleaning machine "Cripika Ace OPT," you can perfectly remove dirt from molds for optical components such as light guide plates and lenses!

＼Contactless cleaning!／ The mold cleaning machine for optical components, 'Clipika Ace OPT,' perfectly removes dirt adhered to delicate optical molds without causing any damage. It addresses gas burns and resin stains, ensuring that even nano and micro-level dirt is not missed. 【Conventional maintenance of optical component molds】 ● Performed manually using cotton swabs and other tools ● Requires utmost care as it is prone to scratches ● May not completely remove all dirt ● Concerns about the burden on the body due to the use of organic solvents 【Clipika Ace OPT】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Allows for contactless cleaning 〇 Cleaning solution penetrates every corner of the mold, lifting and removing dirt 〇 Uses a water-based cleaning solution that has low environmental impact and does not contain organic solvents We offer a lineup tailored to the size of the molds. *For details, please refer to the "Lineup."

• Other molds
• Other cleaning machines
• Ultrasonic Cleaner

With various combinations of options such as multi-channel tanks and ultrasonic features, you can create the sink of your dreams!

The "Multipurpose Sink" is an ideal product for users of the Cripica Ace and companies looking for sinks. 【For Cripica Ace Users】 - Perfect height and sink size for the Cripica Ace - Improved work efficiency in the rinsing process after cleaning with the Cripica Ace - Multi-tank design allows for compatibility with three-tank systems and more 【For Companies Looking for Sinks】 - Can be used as a sink, rinsing tank, or air blow tank - Equipped with ultrasound, it can also be used as a two-tank ultrasonic cleaning machine - Achieve highly functional sinks by combining with various options For more details about the product and options, please download the catalog or contact us.

• Other physicochemical equipment
• Other cleaning machines
• Ultrasonic Cleaner

Cleaning of die-cast molds and large mold temperature control and cooling pipes is now possible with SkatS!

The mold temperature control piping cleaning machine "Scattos" has significantly increased the cleaning liquid capacity to 60L, in addition to the functions of the conventional "Water Reamer." It is now capable of cleaning the temperature control piping of die-cast molds and large molds, as well as accommodating manifolds and below hoppers. Furthermore, the synergistic effect with the specially formulated cleaning liquid (Scattos WR-1), which has enhanced penetration power, maximizes cleaning effectiveness. Please utilize it to help alleviate labor shortages. 【Features】 - Compatible with large molds, die-cast molds, manifolds, and below hoppers - Built-in flow meter to quantify cleaning effectiveness - Pump power increased threefold (compared to WR-11-ADIII) - Automatic control of pump power output according to piping diameter - Simultaneously removes rust and automatically forms a rust prevention coating - Enhanced cleaning power through hybrid cleaning

• Other physicochemical equipment
• Other cleaning machines
• Other surface treatment equipment

Remove and prevent rust accumulated in the mold temperature control piping and cooling pipes to improve cooling efficiency!

The "Water Remover" is a rust removal machine that automatically handles everything from cleaning mold temperature control piping to rust prevention. It removes layers of rust and impurities that have accumulated in the mold temperature control piping, improving cooling efficiency. 【Features】 - No need to disassemble the mold; simply connect the mold and this product with a hose for easy operation. - Forms a rust prevention coating simultaneously with rust removal. - Adopts an air blow drying system, eliminating the need for rinsing or neutralization after rust removal. - Does not discharge rust removal liquid due to a completely closed system.

• Other cleaning machines
• Other surface treatment equipment
• Other cleaning equipment

A welding machine that does not emit ultraviolet rays or fumes, eliminating the need for protective face shields and masks. It also prevents warping and distortion caused by heat!

Just when you're in a hurry, the mold suddenly breaks. You want to use it right away... The mold repair welding machine "Morhei" does not produce ultraviolet rays or fumes, allowing for mold repairs to be done with the naked eye without the need for protective face shields or masks. It welds at a temperature that won't cause burns even if touched with fingertips, enabling continuous power supply. Since it can build up material in a "surface" rather than just a "point," it can weld quickly without sparking. Another feature is that it is difficult to miss the target because the electrode is applied directly to the welding area. It prevents shrinkage and distortion caused by heat, and there is no thermal discoloration after welding. 【Features】 〇 Uses a paste-like welding material that fuses with the base material with minimal heat 〇 Capable of continuous welding from thick to thin linear buildup 〇 Compact design for portability 〇 No preheating or post-heating treatment required

• Plastic Mould
• Other molds
• Welding Machine

We will be exhibiting at "Mechatrotech (or Monozukuri World)" held at Port Messe Nagoya (Nagoya International Exhibition Hall). During the event, we will showcase various products. We invite all related parties to come and visit us. 【Suppliers】 - Pferd - DC Swiss - Ensitec - Erichsen (Sheet metal) - EPK (if space allows) - Pipetite (if space allows)

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

Our company will be exhibiting at the "14th Fukushima Renewable Energy Industry Fair (REIF Fukushima 2025)" held at Big Palette Fukushima from Thursday, October 16, 2025, to Friday, October 17, 2025. Focusing on energy visualization solutions that can be started "immediately," we will introduce power monitoring solutions for each equipment and load through examples of the overall system configuration. 【Main Exhibited Products】 - Gateway BOX We will showcase the "Gateway BOX," a product that packages the necessary equipment for easy adoption of the visualization system. - PAL-Plus type E2 (Scheduled for release soon) We will introduce a "smart" clamp CT that can easily measure power for three-phase three-wire and single-phase three-wire systems (scheduled for release soon). - CEW-M4 / PAL-Plus As a monitoring system that can display power consumption and remaining power capacity, we will present the manager software "CEW-M4," which supports up to 20,000 points, and the Modbus-compatible AC current sensor "PAL-Plus." We sincerely look forward to your visit.

Toyo Machinery Co., Ltd. will be exhibiting at the high-performance film exhibition held at Makuhari Messe. The High-Performance Film Exhibition - FILMTECH JAPAN - is a specialized exhibition where molding processing technologies, materials, and functional films themselves are showcased all in one place. Experts from various fields, including the technology departments of film manufacturers, electronics, automotive, batteries, construction and building materials, and food and beverages, will attend in search of functional films. At Toyo Machinery, we will display actual machines for waviness correction and wrinkle removal while running film, allowing you to see their effects and functions. We will also introduce the quality management system (weight, thickness, moisture, etc.) from the German company Marlo. ↓↓↓Toyo Machinery's exhibitor information↓↓↓ https://www.material-expo.jp/tokyo/ja-jp/search/2025/directory/details.org-a11cd7f5-2a7b-4ea7-85ce-cde885acd2dd.html#/ *If you wish to attend, you can pre-register via the "Details & Application" link below. We sincerely look forward to your visit.

We will be exhibiting at the Okayama Technology Exhibition (OTEX) 2025, which will be held at Convex Okayama from November 12 (Wednesday) to November 13 (Thursday), 2025. We will showcase our eco-board pallets (paper pallets) as well as comprehensive packaging solutions suitable for one-way shipments such as exports. Our products will assist in addressing challenges related to environmental considerations in the context of the SDGs and the promotion of white logistics. ■ Our booth: 46 (Company products) We sincerely look forward to your visit, and we hope you can come together.