Primix will exhibit at "FOOMA JAPAN (Tokyo Big Sight)" in June and will also hold a presentation seminar.

Effective for the dispersion and mixing of high-viscosity materials such as thickening agents! This newly developed mixer (patent obtained) breaks down clumps with high shear force and mixes the entire batch uniformly.

**Features** - Capable of dispersing and mixing high-viscosity materials. - Efficiently flows the processing liquid and foam through "three-dimensional wings" and "S-shaped effects." - Excellent suction from the axial direction and discharge in the radial direction, ensuring uniform mixing throughout. - Effective for dispersing and mixing materials that tend to float near the liquid surface or settle at the bottom of containers. - A turbine with a three-dimensional structure that allows foam and processing liquid to flow naturally. ◆◇━━━━━━━━━━━ 　　　Testing Now Available! ━━━━━━━━━━━━◇◆ If you have materials that are difficult to disperse or homogenize, please give it a try. Feel free to contact us if you wish to request a test.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

I want to mix uniformly while adding powder to the liquid ⇒ The Plimix CombiMix® demonstrates excellent mixing efficiency with vacuum suction stirring from the bottom of the container!

We propose vacuum suction stirring from the bottom of the container using the stirring device CombiMix® from Plimix Co., Ltd., a professional in emulsifiers, dispersers, kneaders, and stirrers. When stirring a liquid while adding powder with a propeller mixer, there is a distance to the stirring section, making it inefficient and leading to issues such as: - Powder not being drawn into the liquid... - Powder floating and not entering the container... - Clumps remaining on the shaft and container walls... These issues are resolved by vacuum suction stirring from the bottom of the container using CombiMix®. ☆ Vacuum suction from the bottom of the container allows direct delivery of powder to the stirring section. ☆ The synergistic effect of high-speed stirring with a homomixer and homodisper, along with low-speed stirring with an anchor mixer, enables uniform processing of the entire material. ☆ No powder adheres to the shaft or container walls, preventing clumps from remaining. *For more details, please download the catalog or contact us.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.