★Techne Measurement★ We accept consultations via web conference.

★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp.

● Domestic development and manufacturing ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Usually in stock ● Comprehensive support system ● Traceability available ■ Techne Measurement Co., Ltd. has been handling moisture management and measurement instruments centered around dew point meters for the past 40 years. The capacitive (impedance) TK-100 online dew point meter is a flagship product of Techne Measurement Co., Ltd. The TK-100 online dew point meter consists of the TK-100 transmitter, monitor, and sensor cable, allowing for easy initiation of dew point measurement. For more details, please download the catalog or contact us. #MoistureMeter

• Temperature and humidity measuring instruments

Series top model, a mirror-type dew point meter capable of precise and stable measurement of high and low dew points.

● Mirror cooling type dew point meter ● Proven track record as a national standard instrument worldwide ● Dew point and frost point highest accuracy ±0.1 ℃ ● High response speed ● Precise and stable measurement of high and low dew points ■ The Model 373 series manufactured by Swiss MBW is widely adopted as a national standard instrument in various countries. 【Main institutions adopting MBW as a national standard instrument】 - U.S. NIST - U.K. NPL - Germany PTB - NMIJ (National Metrology Institute of Japan) - Spain INTA - France CETIAT - Switzerland METAS - Italy INRIM - Finland CMA - Netherlands NMI - Singapore SPRING - Many others ■ The Model 373 series includes multiple models. Please select the model based on the dew point range you wish to measure. Model selection examples: 【Low dew point range up to -95℃】→ MBW 373LX 【High dew point range up to +95℃】→ MBW 373H 【Wide range from -70℃ to +95℃】→ MBW 373LHX There are several other models available. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

The highest model in the series. Even if condensation or chemical substances adhere to the detection part, the heating function will remove them, enabling stable measurements.

● Equipped with sensor heating function ● For high humidity environments and chemically contaminated environments ● Quickly recovers even during condensation ● Detection using HMC01 monolithic polymer cell ● Capable of measuring temperatures up to 180°C and pressures up to 10MPa The EE33 temperature and humidity dew point transmitter for high humidity and harsh environments is the top-of-the-line device for humidity and temperature measurement in the series. It can measure relative humidity, dew point, absolute humidity, and more with high responsiveness and reliability even under the most extreme conditions. Successor model: HTS801 For more details, please download the catalog or contact us.

• Other electronic measuring instruments

Oxygen concentration meter capable of measuring up to % and PPM levels, resistant to combustible gases and organic solvents, using a galvanic cell type.

● Measurement at % and PPM levels ● Galvanic cell-type sensor resistant to combustible gases and organic solvents ● High response speed, long lifespan, and disposable proprietary patented sensor ● Sampling system and solenoid valve included as standard ● Real-time data management via computer ● Data logging function ■ Model 2001RS is an oxygen analyzer capable of measuring from 0 to 10,000 ppm. Model 201RS is an oxygen analyzer capable of measuring from 0.1% to 25%. ■ All operations, including setting the output range, configuring two alarm points, and changing the span during calibration, can be performed from the front panel without removing the oxygen meter from the panel. Additionally, the sensor is a disposable cartridge type, allowing for easy manual replacement from the front panel. For more details, please download the catalog or contact us.

• Analytical Equipment and Devices

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

On our company's website introducing vehicle detection sensors, you can easily find products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." [Introduction to Vehicle Detection Sensors] The sensors detect the passage of vehicles and notify you with a rotating light or switch the display of parking availability. They contribute to safe driving within parking lots and smooth management operations. They are used in various areas, from coin parking to large-scale parking lots. We will continue to improve our webpage to provide information about Hotron's "Vehicle Detection Sensors."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot in front of it. It reduces the risk of virus and bacteria transmission in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus transmission by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.