Notice of Participation in IFCAA 2022 YOKOHAMA【Yokohama International Fire and Disaster Prevention Exhibition】

Even if there are many fire equipment inspection management locations, securing the inspection items will reduce the reporting time by half.

According to the Fire Service Act, buildings equipped with fire-fighting equipment are required to conduct inspections of the equipment twice a year and report to the relevant fire department once a year (for specified fire prevention objects) or report the inspection results once every three years (for non-specified fire prevention objects). This system supports inspection contractors commissioned by building owners to smoothly carry out inspection and construction work. 【The following concerns will be resolved】 ■ It is unclear whether inspections are being conducted properly on-site. ■ There is no organization of photos related to inspection work. ■ Matters that cannot be judged by inspectors must be verified on-site. ■ There is no information sharing with externally contracted inspectors. ■ There is variability in operational standards and reporting methods among inspectors. ■ Inspection reports cannot be provided to customers immediately. ☆*★*☆*★*☆*★*☆☆*★*☆*★*☆*★*☆☆*★*☆*★*☆*★*☆★* Currently, we are offering a free PDF of "Case Studies in the Inspection Equipment Industry." For more details, please download the catalog or contact us. ☆*★*☆*★*☆*★*☆☆*★*☆*★*☆*★*☆☆*★*☆*★*☆*★*☆★*

• Document and Data Management

The visual record improves the operational efficiency of fire equipment inspection businesses and eliminates inconsistencies in inspection work.

According to the Fire Service Act, buildings equipped with fire-fighting equipment are required to conduct inspections of the equipment twice a year and report the results to the relevant fire department once a year for specified fire hazards or once every three years for non-specified fire hazards. The visual record is supported by inspection contractors commissioned by building owners to facilitate smooth inspection operations. By implementing the system, the following concerns can be resolved: - It is unclear whether proper inspections are being conducted on-site. - There is no organization of photos related to inspection work. - Matters that cannot be judged by inspectors must be verified on-site. - There is no information sharing with externally contracted inspectors. - There are inconsistencies in operational standards and reporting methods among inspectors. - Inspection reports cannot be provided to customers immediately. We provide a platform that benefits all three parties: contractors, owners, and cooperating businesses. For more details, please check the website below or download the catalog.

• project management

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.