On-demand webinar: Automation of proteomics sample preparation

Even in the presence of soluble SDS, the Resolvex A200 automates one-stop proteomics sample preparation for LC-MS.

This application note will help you understand that there are no time-consuming dispensing or centrifugation processes, and the preparation quality is equivalent to that of the manual.

• Dispenser
• Analytical Equipment and Devices

A compact desktop device suitable for medium-sized labs. It quickly handles pressurized SPE or buffer exchange workflows.

• Improved work efficiency with an intuitive touchscreen • Supports up to 11 types of solvent handling for multiple users • Programmable pressure control feature • Automation of pressure profile operation from 0 to 5.5 bar • Compatible with 96-well plates or 1 mL columns in units of 4 • Compatible with standard 96-well plates and 1 mL columns from other manufacturers *For more details, please download the PDF or contact us.*

• Dispenser

With the Resolvex A200, which is quick, easy, and can also avoid human errors, the purification of viral RNA can be shortened to about 30 minutes for 96 samples.

This is a compact desktop device suitable for medium-sized laboratories. It can be installed on lab benches in laboratories or inspection rooms, allowing other tasks to be performed during solid-phase extraction (SPE) processing. Programmable pressure control. During adsorption, samples that are prone to clogging due to grain entrapment can be cleared by adjusting the pressure amount in the program. *For more details, please download the PDF or contact us.*

• Dispenser

Compact pressurized tabletop automation device for MS sample preparation using columns or plates.

The concentration and purification of the target compound will be carried out under pressure. Solid-phase extraction (SPE) using pressurized gas provides maximum reproducibility and uniformity in column and well plate formats.

• Dispenser

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.